SPECIAL NOTICE
65 -- Medical Instruments
- Notice Date
- 3/20/2014
- Notice Type
- Special Notice
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- Department of Veterans Affairs;Network 11 Contracting Office;8888 Keystone Crossing;Suite 1100;Indianapolis IN 46240
- ZIP Code
- 46240
- Solicitation Number
- VA25114Q0221
- Archive Date
- 5/19/2014
- Point of Contact
- Kelly Poole
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation RFQ-VA-251-14-Q-0221 is issued as a request for quote (RFQ) and is a set-aside for small business under NAICS code 339112 (500 employees). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-12. No telephone requests will be accepted. Only written or email requests received directly from the requester are acceptable. Contractor shall provide the following line items to the Richard L. Roudebush VAMC, 1481 West Tenth Street, Indianapolis, IN 46202. FOB Destination: QTY: 1AMD/ECAT Item: 999066692MNF Item: 03.010.093Description: REAMING ROD PUSH ROD WITH BALL HANDLEUM: EA 299906670103.010.1044.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MMEA 199906670603.010.107STARDRIVE SCREWDRIVER T25/SELF-RETAININGEA 199906670903.010.110CANNULATED STARDRIVE SCREWDRIVER T40/SELF-RETAININGEA 1999072232321.20RATCHET WRENCH-11MM WIDTH ACROSS FLATSEA 1999072712357.22HAMMER GUIDE FOR SLIDE HAMMEREA 199907657269.004.300GRAPHIC CASE FOR TIBIAL NAIL-EX INSTRUMENT SETEA 199906662403.010.015COMPRESSION DEVICE FOR TI CANNULATED TIBIAL NAILS-EXEA 199906662903.010.023RADIOGRAPHIC CANAL WIDTH ESTIMATOR FOR IM NAILSEA 199906663803.010.03512.0MM PROTECTION SLEEVEEA 199906664303.010.04012.0MM CANNULATED AWLEA 199906664603.010.045STANDARD INSERTION HANDLEEA 199906665303.010.052AIMING ARM FOR TI CANNULATED TIBIAL NAILS-EXEA 299906666003.010.0603.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATIONEA 199906662703.010.021RADIOGRAPHIC RULER FOR TI CANNULATED TIBIAL NAILSEA 199906663003.010.024HOLDING DEVICE FOR GUIDE WIRES AND REAMING RODSEA 199906663903.010.03612.0MM CANNULATED DRILL BIT LARGE QC/190MMEA 199906664503.010.044CANNULATED CONNECTING SCREW FOR STANDARD INSERTIONEA 199906664803.010.047DRIVING CAP WITH HANDLE ADAPTEREA 199906665703.010.056SLIDE/FIXED HAMMER 700 GRAMSEA 199906666603.010.06312.0MM/8.0MM PROTECTION SLEEVE 188MMEA 199906666803.010.0658.0MM/4.2MM DRILL SLEEVE 200MMEA 199906667103.010.0704.2MM TROCAR 210MMEA 199906669103.010.092BALL HEX SCREWDRIVER 8MMEA 299906669903.010.1033.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MMEA 199906670503.010.106DIRECT MEASURING DEVICE FOR LCKNG SCR TO 100MM F/IM NAILSEA 2999072230321.174.5MM PIN WRENCH 120MMEA 1999072709357.133EXTRACTION SCREW FOR TI FEMORAL AND TIBIAL NAILSEA 1999072744357.398CANNULATED SHAFT WITH 8MM HEX 125MMEA 299906666203.010.0614.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATIONEA 199906666703.010.0648.0MM/3.2MM DRILL SLEEVE 200MMEA 199906667003.010.0693.2MM TROCAREA 199906667303.010.072DEPTH GAUGE FOR LOCKING SCREWS TO 100MM FOR IM NAILSEA 199914981303.111.005DEPTH GAUGE FOR 2.0MM/2.4MM AND 2.7MM SCREWSEA 199914981103.110.0231.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/CONEEA 199914981203.110.0241.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/COAXIALEA 199920268761.116.001GRAPHIC CASE/FULL LENGTH 4 BAY/F/MODULAR GC SYSTEMEA 199920282661.111.4712/3 INSTR TRAY FOR LCP AND VA-LCP DISTAL RADIUS SYSTEMSEA 199920291861.111.4721/3 INSTR TRAY FOR DSTL RADIUS FORCEPS AND BENDING PLIERSEA 199920287061.111.4731/3 INSTR TRAY FOR DSTL RAD RETRACTORS/HOOK/ELEVATORSEA 2999071859310.192.0MM DRILL BIT/QC/100MMEA 2999071879310.262.7MM DRILL BIT/QC/100MMEA 2999071918310.5091.8MM DRILL BIT WITH DEPTH MARK/QC/110MMEA 2999121637310.5302.4MM DRILL BIT/QC/100MMEA 199911425503.110.007STARDRIVE SCREWDRIVER T8EA 1999121641311.43HANDLE WITH QUICK COUPLING, SMALLEA 1999072086314.467STARDRIVE SCREWDRIVER SHAFT T8 105MMEA 1999114875314.453STARDRIVE SCREWDRIVER SHAFT T8 55MMEA 1999072087314.468HOLDING SLEEVE FOR STARDRIVE SCREWDRIVER SHAFT T8EA 1999072213319.39SHARP HOOKEA 2999072244323.029THREADED LCP(TM) DRILL GUIDE F/LCP(TM) DISTAL RADIUS PLATESEA 199908752803.110.0001.8MM UNIVERSAL VARIABLE ANGLE LOCKING DRILL GUIDEEA 1999072256323.2022.4MM UNIVERSAL DRILL GUIDEEA 1999072257323.262.7MM UNIVERSAL DRILL GUIDEEA 1999072282324.0841.25MM K-WIRE INSERTEA 2999072344329.12BENDING PLIERS-SMOOTH JAWS FOR MINI PLATESEA 2999072380329.922BENDING PIN FOR 2.4MM LOCKING PLATESEA 1999023249398.41REDUCTION FORCEPS WITH POINTS BROAD-RATCHETEA 1999073232398.95TERMITE FORCEPS 90MMEA 1999073304399.48PERIOSTEAL ELEVATOR 3MM CURVED BLADE-STRAIGHT EDGEEA 1999073306399.481PERIOSTEAL ELEVATOR 3MM CURVED BLADE - ROUND EDGEEA 1999073332399.97REDUCTION FORCEPS WITH POINTS RATCHET 130MMEA 299911426203.110.0211.8MM DRILL GUIDE WITH MEASURING FOR GUIDE BLOCKEA 199908753003.110.005HANDLE FOR TORQUE LIMITING ATTACHMENTEA 1999076297511.776TORQUE LIMITING ATTACHMENT 0.8NM/QUICK COUPLINGEA 199920273761.111.469SCREW RACK FOR 2.4MM VA-LCP DSTL RADIUS SYS GRAPHIC CASEEA 199914175003.111.500GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/RTEA 199914175103.111.501GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/LTEA 199914216160.111.465MODULE FOR VA-LCP 2-COLUMN VOLAR DSTL RADIUS PL/NARROWEA 199911780503.111.600GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/RIGHTEA 199911780603.111.601GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/LEFTEA 199911780703.111.700GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/RIGHTEA 199911780803.111.701GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/LEFTEA 199911492360.111.461MODULE F/VA-LCP 2-COLUMN VOLAR DISTAL RADIUS PLATEEA 199915049760.111.467MODULE FOR VA-LCP VOLAR EXTRA-ARTICLR DSTL RADIUS PLEA 1999073272399.18SMALL HOHMANN RETRACTOR 6MM SHORT NARROW TIP 160MMEA 1999073274399.19SMALL HOHMANN RETRACTOR 8MM SHORT NARROW TIP 160MMEA 499915054260.116.054MODULE ADAPTERS FOR 1 HIGH MODULES/F/MODULAR GC SYSEA 199915050660.111.476MODULE FOR 2.4MM VA-LCP DORSAL DISTAL RADIUS PLATESEA 1999072756357.412CANNULATED REVERSE AWLEA 1999072874360.255REAMING ROD MEASURING DEVICEEA 1999076617690.339TI TROCHANTERIC FIXATION NAIL INSERTION SET GRAPHIC CASEEA 1999066064393.10UNIVERSAL CHUCK WITH T-HANDLEEA 1999072234321.25SPANNER WRENCHEA 1999072712357.22HAMMER GUIDE FOR SLIDE HAMMEREA 1999072232321.20RATCHET WRENCH-11MM WIDTH ACROSS FLATSEA 1999072737357.391RADIOGRAPHIC RULER F/TROCHANTERIC FIXATION NAILSEA 1999072739357.3933.2MM TROCAR 172MMEA 1999072741357.395DRIVING CAP FOR 357.411EA 1999072744357.398CANNULATED SHAFT WITH 8MM HEX 125MMEA 1999072755357.411INSERTION HANDLE F/TROCHANTERIC FIXATION NAILSEA 1999072765357.515BALL HEX SCREWDRIVER 8MM FOR TI FEMORAL NAILSEA 1999073301399.42HAMMER 500 GRAMSEA 1999072499351.05TISSUE PROTECTOREA 1999072715357.25SLIDE HAMMER FOR HAMMER GUIDEEA 1999072738357.39217.0MM/3.2MM WIRE GUIDE 161MMEA 1999072740357.39417.0MM CANNULATED DRILL BIT LARGE QC/300MMEA 2999072743357.397CANNULATED CONNECTING SCREW F/TROCHANTERIC FIXATION NAILSEA 1999072754357.41022.0MM/17.0MM PROTECTION SLEEVEEA 1999025302314.11HOLDING SLEEVEEA 1999072782357.92MISS-A-NAIL AIMING JIGEA 199906672203.010.150STAR/HEXDRIVE SCREWDRIVER T25 3.5MM HEX/SELF-RETAININGEA 1999071893310.313.2MM DRILL BIT/QC/145MMEA 1999071954310.99COUNTERSINK FOR 4.5MM CORTEX SCREWSEA 5999072286324.1742.5MM WIRE GUIDE FOR 5.0MM SCREWSEA 1999073164397.706HANDLE FOR AO REAMING COUPLER CONNECTIONEA 1999122118310.444.5MM DRILL BIT/QC/145MMEA 1999023273323.464.5MM UNIVERSAL DRILL GUIDEEA 1999025303312.484.5MM/3.2MM INSERT DRILL SLEEVEEA 2999071966311.449PUSH-PULL REDUCTION DEVICE FOR 4.5MM LCP ® PLATESEA 4999071996312.4494.3MM THREADED DRILL GUIDEEA 1999072224321.12ARTICULATED TENSION DEVICE WITH GAUGE-SPAN 20MMEA 1999072241323.021DIRECT MEASURING DEVICE FOR 5.0MM LOCKING SCREWSEA 1999023137311.44T-HANDLE WITH QUICK COUPLINGEA 1999025302314.11HOLDING SLEEVEEA 2999071967311.46TAP FOR 4.5MM CORTEX/SHAFT SCREWS 130MM/57MM TAP DEPTHEA 1999072213319.39SHARP HOOKEA Offorers must comply with all instructions contained in provision 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition. The following additional provisions and clauses apply: 52.212-2, Evaluation-Commercial Item, the Government will award a purchase order resulting from this solicitation to the responsible offerors whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. Price will be evaluated to determine its fairness, completeness, and reasonableness as it relates to the offer. 52.212-3, Offeror Representations and Certifications-Commercial Items, a completed copy of this provision shall be submitted with the offer unless ORCA registered which must be noted in quotation. 52.212-4, Contract Terms and Conditions-Commercial Items. 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, to include clauses: 4,7, 25, 27, 36, 37, 46, 48. The following additional clauses apply: SAM Clause: Attention: You must be registered in SAM to be considered for award. FAR 52.204-7, Central Contractor Registration (Oct 2003) (B)(2) the offeror shall provide its DUNS or, if applicable, its DUNS+4 number with its offer, which will be used by the contracting officer to verify that the offeror is registered in the SAM database. (C) Lack of registration in the SAM database will make an offeror ineligible for award. Offerors and contractors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220 or via the Internet at https://www.SAM.gov. Electronic Funds: FAR 52.252-2, Clauses Incorporated by References (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. 852.232-72, Electronic Submission of Payment Requests, 852.270-4, Commercial Advertising. Upon request, the contracting officer will make their full text available. Offers are to be received via email to Kelly.poole@va.gov or at the VA NCO 11 Contracting Office, 8888 Keystone Crossing, Suite 1100, Indianapolis, IN 46202, ATTN: Kelly Poole no later than 2:00 P.M. eastern standard time on 24 March 2014. Contact Kelly Poole, Contract Specialist, Kelly.poole@va.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/InVAMC538/InVAMC538/VA25114Q0221/listing.html)
- Record
- SN03316279-W 20140322/140320235339-86b8397a531f88f124a2205ebbb04c78 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |