SOLICITATION NOTICE
93 -- Casting and Grounding Sleeves for restoration of propeller shaft
- Notice Date
- 3/29/2014
- Notice Type
- Presolicitation
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- SPMYM4 DLA Maritime, Shipyard Support Det., Code 202 667 Safeguard Street, Ste. 100 Pearl Harbor, HI
- ZIP Code
- 00000
- Solicitation Number
- SPMYM414R0005
- Response Due
- 4/13/2014
- Archive Date
- 4/28/2014
- Point of Contact
- Mark Bultman 808.473.8000 x5822
- Small Business Set-Aside
- N/A
- Description
- 1. FORWARD BEARING JOURNAL SLEEVE (MOD-25), CUNI (70-30), DWG 203-6225709 REV C, PIECE 42, NOTES 49, 70, AND 72 APPLIES. DWG 545-4494267 REV N, TABLE I, CATEGORY 2, SUB-CATEGORY G APPLIES (HYDROSTATIC TESTING IS NOT REQUIRED). ROUGH MACHINED DIMENSIONS ***Estimate: 25.250 OD X 22.920 ID X 108.000 LENGTH TOLERANCE: OD: +1/16, -0; ID: +0, -1/16; LENGTH: +1/4, -0. FINISH: APPROX. 250 RMS ON ALL SURFACES. ***We will update the dimensions in the final solicitation and contract. ADDITIONAL DATA REQUIREMENTS: LEVEL 1 MATERIAL CERTIFICATION, DIMENSIONAL, MARKINGS, WELDABILITY TESTING, LIQUID PENETRANT TESTING, RADIOGRAPHIC TESTING. SEE ATTACHED TECHNICAL TECHNICAL DATA SHEET. Material Spec: ASTM B369-09, UNS ALLOY C96400 2. AFT BEARING JOURNAL SLEEVE (MOD 25), CUNI (70-30), DWG 203-6225709 REV C, PIECE 43, NOTES 49, 70 AND 72. DWG 545-4494267 REV N, TABLE I, CATEGORY 2, SUB-CATEGORY G APPLIES (HYDROSTATIC TESTING IS NOT REQUIRED). ROUGH MACHINED DIMENSIONS: ***Estimate 26.375 OD X 23.900 ID X 162.125 LENGTH TOLERANCE: OD: +1/16, -0; ID: +0, -1/16; LENGTH: +1/4, -0. FINISH: APPROX. 250 RMS ON ALL SURFACES. ***We will update the dimensions in the final solicitation and contract. 3. GROUNDING SLEEVE (MOD 25), CUNI (70-30), DWG 203-6225709 REV C, PIECE 25, NOTE 49. DWG 545-4494267 REV N, TABLE I, CATEGORY 1, SUB-CATEGORY D3 APPLIES. ROUGH MACHINED DIMENSIONS: *** Estimate 25.250 OD X 22.840 ID X 6.500 LENGTH TOLERANCE: OD: +1/16, -0; ID: +0, -1/16; LENGTH: +1/4, -0. FINISH: APPROX. 250 RMS ON ALL SURFACES. ***We will update the dimensions in the final solicitation and contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/9aa97dadac6bdfc0d24b2e0db71dbac9)
- Record
- SN03323979-W 20140331/140329233024-9aa97dadac6bdfc0d24b2e0db71dbac9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |