FBODaily.com | FedBizOpps: PRESOL | 12 | Thermal Targets

FBO DAILY - FEDBIZOPPS ISSUE OF APRIL 02, 2014 FBO #4512
SOLICITATION NOTICE

12 -- Thermal Targets

Notice Date: 3/31/2014
Notice Type: Combined Synopsis/Solicitation
Contracting Office: BLDG 2021 CLUB ROAD, FORT BLISS,, TX 79916
ZIP Code: 79916
Solicitation Number: UNAWRD-14-Q-7821
Response Due: 4/10/2014
Archive Date: 10/7/2014
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is UNAWRD-14-Q-7821 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-72. The associated North American Industrial Classification System (NAICS) code for this procurement is 336992 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-04-10 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be JAKIMA WA, WA 98901 The MICC Joint Base Lewis McChord requires the following items, Meet or Exceed, to the following: LI 001: TARGET T-72 FLANK FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 10, EA; LI 002: TARGET T-72 FLANK REAR: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 10, EA; LI 003: TARGET T-72 FRONTAL: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 25, EA; LI 004: TARGET BMP FLANK FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 20, EA; LI 005: TARGET BMP FLANK REAR: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 20, EA; LI 006: TARGET BMP FRONTAL: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 30, EA; LI 007: BRDM FLANK FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 4, EA; LI 008: BRDM FLANK REAR: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 4, EA; LI 009: BRDM FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 7, EA; LI 010: BTR FLANK FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 4, EA; LI 011: BTR FLANK REAR: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 4, EA; LI 012: BTR FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 7, EA; LI 013: U-375 FLANK FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 5, EA; LI 014: U-375 FLANK REAR: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 5, EA; LI 015: U-375 FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 10, EA; LI 016: TARGET CIVILIAN TRK FLANK FRONT: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 15, EA; LI 017: TARGET CIVILIAN TRK FLANK REAR: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 15, EA; LI 018: TARGET CIVILIAN TRK FRONTAL: Specifications for targets: Targets must be 3/8 inch or thicker fiberglass material with an integrated and internal thermal signature which is embedded in the t arget. The thermal must be 110V powered. It must be ridgid enough to withstand and detect rounds from 5.56 to TOW missilies and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to funtion - no stick on thermal-no backing of plywood to attach to the target, etc... Must be able to withstand sustained 40mph with without folding up, or breaking. Must be able to withstand heat up to 120F; must be able to withstand cold down to -75F. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 25, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The Contracting Officer (KO) at Mission and Installation contracting Office, Joint Base Lewis-McChord is the only person authorized to approve changes or modify any of the requirements under this contract, and notwithstanding anything contained elsewhere in this contract, the said authority remains solely with the KO. In the event the Contractor or contract employee effects any such change at the direction of any person other than the KO, the change will be considered to have been without authority, and no adjustment will be made in the contract price under the Changes clause or any other clause to cover any increase in costs incurred as a result thereof. A protest to a U.S. Army Materiel Command forum is considered a ?protest to the agency?, as described in FAR 33.103. The HQAMC Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an alternative dispute resolution forum, rather than filing a protest with the Government Accountability Office or another external forum. The proper address for AMC level protests is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil This is a Request for Bids under Federal Acquisition Regulation 13, Simplified Acquisition. The following clauses apply: ClauseCriteria FAR 52.213-1Fast Pay is incorporated by reference and applies to Fast Paypurchase orders under $30,000. FAR 52.213-2Is incorporated by reference and applies to Invoicespurchase orders authorized for Advance Payment. FAR 52.213-3Is incorporated by reference and applies to all firm fixed Notice to Supplierprice purchase orders. FAR 52.213-4Is incorporated by reference and applies to Terms and Conditions-purchase orders under $150,000. Simplified Acquisitions, Non-Commercial items FAR 52.252-2 : This award incorporates one or more clauses by reference, with the Clauses Incorporated same force and affect as if they were given in full text. Upon request the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address http://farsite.hill.af.mil/vffara.htm Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. This is a Request for Quotes under Federal Acquisition Regulation 12, Acquisition of Commercial Items using FAR 13 Simplified Acquisition Procedures. The following provisions and clauses apply: ClauseDescription FAR 52.212-1Instructions to Offers I commercial Items. Incorporated by reference FAR.212-2 Evaluation-Commercial Items Incorporated by reference FAR 52.212-3Offeror Representations and Certification- Commercial Items Incorporated in Full Text FAR 52.212-4Contract Terms and Conditions-Commercial Items Incorporated by reference FAR 52.212-5 Contract Terms and conditions Required to Implement Statutes or Executive Incorporated in Full TextOrders-Commercial Items FAR 52.209-7Information Regarding Responsibility Matters Incorporated by reference FAR 52.252-2:This award incorporates one or more clauses by reference, with the Clauses Incorporated same force and affect as if they were given in full text. Upon request the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address http://farsite.hill.af.mil/vffara.htm Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. In order to enhance the efficiency of the procurement process, the Government intends to evaluate only the lowest priced quote to determine if the quote is technically acceptable and whether the vendor has acceptable or neutral past performance. If the lowest priced quote is reasonably priced and technically acceptable and the vendor has acceptable or neutral past performance, the Government intends to make an award to that vendor and no other quote will be evaluated. If the lowest priced offer is not technically acceptable, the vendor does not have acceptable or neutral past performance, or both, then the Government will evaluate the second lowest priced quote for technical acceptability and acceptable or neutral past performance. This method will continue until the lowest priced, technically acceptable quote, by a vendor with acceptable or neutral past performance, is determined. Quotes will be evaluated based on price and technical acceptability. Quoter certifies that the product quoted meets or exceeds all minimum requirements as stated in the Request for Quotes. Quotes must be submitted per unit price and total price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this quote will be rejected as non-responsive. The contract price includes all applicable Federal, state, and local taxes and duties. FOB Destination CONUS (Continental U.S.) Procedures for commercial vehicle access to military installations are varied. To enter the installation, the Contractor should thoroughly comply with the access procedures of a respective installation. The Contractor shall ensure that its drivers, including drivers of subcontractors at any tier, comply with the access procedures enforced by each military installation. The Contractor shall completely coordinate with the military installations and the delivery point of contacts. The contractor shall stamp or mark the supplies delivered or otherwise furnish notice with the supplies of the existence of a warranty. Markings shall include (i) a brief statement that a warranty exists, (ii) the substance of the warranty, (iii) its duration, and (iv) who to notify if the supplies are found to be defective. Procedures for commercial vehicle access to YTC are subject to change without prior notice. Current access information may be obtained by calling (509) 577-3236. As of 15 January 2002, the following requirements apply. Commercial vehicle access to YTC will be allowed only at the Main Gate (Exit 26 from I-82) on Monday through Friday. This gate will be open for inbound commercial vehicle access and inspection between 0700 hours and 1530 hours. The gate is closed on weekends (Saturdays and Sundays). All commercial vehicles will be searched. The Contractor should anticipate delays in getting commercial vehicles on YTC. If the commercial vehicle is carrying a load of cement concrete or hot asphalt concrete for delivery, the driver shall notify the gate guard as soon as possible and request that the vehicle be given priority for being searched; however, the Government does not guarantee that the vehicle will be given priority. THE FOLLOWING INFORMATION IS PROVIDED TO ASSIST YOU, AND WILL HELP TO EXPEDITE PAPERWORK AND PAYMENT. a. Only one delivery will be accepted against each line item. Backorders will NOT be accepted on individual line items. b. Deliver on or before date specified. Deliveries will be accepted Monday through Friday (except Holidays) from 7:30 A.M. to 2:30 P.M. to Block 15 of the Purchase Order. Notify the individual in Block 16 of any delay encountered (due to strikes, factory backorders, etc.) and give revised delivery date if possible. c. Mark outside of all cartons. Put packing list inside cartons. Show the order number assigned, the PR number shown at the end of each item, and the quantity shipped. All items will be identified by the part number by attached tag and/or stamped identification. d. On direct shipments, have the supplier or manufacturer cite our order number on packages. This eliminates delay caused by trying to determine the firm awarded the original order. Unless otherwise specified in this contract, the contractor shall obtain any necessary licenses and permits, give all notices, and comply with any applicable Federal, State, County, and municipal laws, codes, and regulations in connection with this award. The Contractor will appoint an IMO to be the liaison between the Contractor and Government communication personnel. All requirements to the Network Enterprise Centre (NEC) will be coordinated through the IMO. The contractor shall not make news releases or otherwise provide information relative to the performance of this contract or information relative to any incident occurring on JBLM without prior approval of the Contracting Officer. Acquisition of commercial information technology equipment/supplies shall comply with the current version U.S. Army Net Command?s of ASC Technical Authority (TA) Implementation Memorandum. If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. As prescribed in 22.1705(a), insert the following clause: COMBATING TRAFFICKING IN PERSONS (FEB 2009) (a) Definitions. As used in this clause-- Coercion means-- (1) Threats of serious harm to or physical restraint against any person; (2) Any scheme, plan, or pattern intended to cause a person to believe that failure to perform an act would result in serious harm to or physical restraint against any person; or (3) The abuse or threatened abuse of the legal process. Commercial sex act means any sex act on account of which anything of value is given to or received by any person. Debt bondage means the status or condition of a debtor arising from a pledge by the debtor of his or her personal services or of those of a person under his or her control as a security for debt, if the value of those services as reasonably assessed is not applied toward the liquidation of the debt or the length and nature of those services are not respectively limited and defined. Employee means an employee of the Contractor directly engaged in the performance of work under the contract who has other than a minimal impact or involvement in contract performance. Forced Labor means knowingly providing or obtaining the labor or services of a person-- (1) By threats of serious harm to, or physical restraint against, that person or another person; (2) By means of any scheme, plan, or pattern intended to cause the person to believe that, if the person did not perform such labor or services, that person or another person would suffer serious harm or physical restraint; or (3) By means of the abuse or threatened abuse of law or the legal process. Involuntary servitude includes a condition of servitude induced by means of-- (1) Any scheme, plan, or pattern intended to cause a person to believe that, if the person did not enter into or continue in such conditions, that person or another person would suffer serious harm or physical restraint; or (2) The abuse or threatened abuse of the legal process. Severe forms of trafficking in persons means-- (1) Sex trafficking in which a commercial sex act is induced by force, fraud, or coercion, or in which the person induced to perform such act has not attained 18 years of age; or (2) The recruitment, harboring, transportation, provision, or obtaining of a person for labor or services, through the use of force, fraud, or coercion for the purpose of subjection to involuntary servitude, peonage, debt bondage, or slavery. Sex trafficking means the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex act. (b) Policy. The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not-- (1) Engage in severe forms of trafficking in persons during the period of performance of the contract; (2) Procure commercial sex acts during the period of performance of the contract; or (3) Use forced labor in the performance of the contract. (c) Contractor requirements. The Contractor shall-- (1) Notify its employees of-- (i) The United States Government's zero tolerance policy described in paragraph (b) of this clause; and (ii) The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment; and (2) Take appropriate action, up to and including termination, against employees or subcontractors that violate the policy in paragraph (b) of this clause. (d) Notification. The Contractor shall inform the Contracting Officer immediately of-- (1) Any information it receives from any source (including host country law enforcement) that alleges a Contractor employee, subcontractor, or subcontractor employee has engaged in conduct that violates this policy; and (2) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this clause. (e) Remedies. In addition to other remedies available to the Government, the Contractor's failure to comply with the requirements of paragraphs (c), (d), or (f) of this clause may result in-- (1) Requiring the Contractor to remove a Contractor employee or employees from the performance of the contract; (2) Requiring the Contractor to terminate a subcontract; (3) Suspension of contract payments; (4) Loss of award fee, consistent with the award fee plan, for the performance period in which the Government determined Contractor non-compliance; (5) Termination of the contract for default or cause, in accordance with the termination clause of this contract; or (6) Suspension or debarment. (f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts. (g) Mitigating Factor. The Contracting Officer may consider whether the Contractor had a Trafficking in Persons awareness program at the time of the violation as a mitigating factor when determining remedies. Additional information about Trafficking in Persons and examples of awareness programs can be found at the website for the Department of State's Office to Monitor and Combat Trafficking in Persons at http://www.state.gov/g/tip. Quote MUST be good for 30 days after Request for Quote closing date. Questions concerning this quote must be submitted at least 5 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. The contractor shall not hire any individual to perform work on Joint Base Lewis-McChord or any other Government installation under this contract unless such individual is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. The contractor shall comply with 8 USC 1324a, 8 CFR Part 274a, and any other laws and regulations pertaining to the employment of aliens. The contractor shall, upon request by the Contracting Officer, present documentary evidence acceptable to the Contracting Officer that the employee(s) named or identified in the request is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. Such documentation shall be presented to the Contracting Officer within three (3) working days after the contractor's receipt of the request for documentation. If acceptable documentary evidence is not provided within the required time, the contractor shall not allow the affected employee(s) to perform work on Fort Joint Base Lewis-McChord or any other Government installation under this contract until after such acceptable documentary evidence is presented to the Contracting Officer. Removal of any employee(s) from performance of work pursuant to this provision shall not relieve the contractor of the responsibility to perform all work under this contract in a timely manner. Contact ClientServices @ FedBid.com or call 1-877-9FEDBID to address any questions for quotes utilizing FedBid. Contact the specialist listed in the solicitation to address any questions concerning any other request for quotes. New equipment/parts only. No remanufactured products.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/cc259eb95e42a0c1d3f39083dc78bb6f)
Place of Performance: Address: JAKIMA WA, WA 98901; Zip Code: 98901
Record: SN03324125-W 20140402/140331234036-cc259eb95e42a0c1d3f39083dc78bb6f (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

12 -- Thermal Targets