SOLICITATION NOTICE
13 -- 2.0 SECOND DELAY INITIATOR
- Notice Date
- 4/17/2014
- Notice Type
- Presolicitation
- NAICS
- 325920
— Explosives Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; AFLCMC EBHK;6033 ELM LN BLDG 1247; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8213-14-R-3051
- Response Due
- 6/2/2014
- Archive Date
- 11/28/2014
- Point of Contact
- Loriell Rumsey, Phone 801-775-3237, Fax 801-777-5840, Email loriell.rumsey@us.af.mil
- E-Mail Address
-
Loriell Rumsey
(loriell.rumsey@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20201477038 Item: 0001 NSN: 1377013187696ES 2.0 SECOND DELAY INITIATOR P/N: 3123900-6, P/N: 68B710650-105, P/N: 6123100, Description: INITIATOR,CARTRIDGE ACTUATED|4.680 INCHES NOMINAL|F-15BE AIRCRAFT|3123950-6|TIME DELAY|GAS|INCLUDED|... : 0.0000 Applicable to: F-15 PR Number(s): FD20201477038 Item: 0001AA NSN: SAME Same as basic item above Quantity: 30.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477038 Item: 0001AB NSN: SAME Same as basic item above Quantity: 104.0000 EA Destn: FV2172,HILL AIR FORCE BASE,UT,84056-5707. Delivery: 30 SEP 2015 On or Before, 104.00 EA PR Number(s): FD20201477038 Item: 0002 NSN: 1377013187697ES INITIATOR,CARTRIDGE P/N: 3123900-5, P/N: 68B710650-103, P/N: 6122100, Description: INITIATOR,CARTRIDGE ACTUATED|4.680 INCHES NOMINAL|F-15BE ACFT|3123950-5|TIME DELAY|GAS|INCLUDED|1.5|... : 0.0000 Applicable to: F-15 PR Number(s): FD20201477038 Item: 0002AA NSN: SAME Same as basic item above Quantity: 20.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477038 Item: 0002AB NSN: SAME Same as basic item above Quantity: 91.0000 EA Destn: FV2172,HILL AIR FORCE BASE,UT,84056-5707. Delivery: 30 SEP 2015 On or Before, 91.00 EA PR Number(s): FD20201477038 Item: 0003 DATA Supp. Description: NOTE: Approved Ammunition Data Cards (A007), with respective CDRL, shall be attached electronically... Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *ARO IAW DD FORM 1423-1, 1.00 MM PR Number(s): FD20201477038 Item: 0004 DATA Supp. Description: NOTE: Each respective CDRL shall be attached electronically in WAWF using DO... Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *ARO IAW DD FORM 1423-1, 1.00 MM PR Number(s): FD20201477038 Item: 0005 DATA Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *ARO IAW DD FORM 1423-1, 1.00 LO Duration of Contract Period: Delivery 30 Sep 15 All responsible sources may submit a capablility statement, proposal, or quotation, which shall be considered by the agency. Electronic procedure will be used for this solicitation. The solicitation will be made available through electronic data interchange procedures Electronic Data Interchange (EDI). To obtain and respond to the solicitation electronically, the following information is applicable: www.fbo.gov. Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. To include all required reports and data. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8213-14-R-3051/listing.html)
- Record
- SN03342076-W 20140419/140417235536-5198d69db919880c24d438800074655a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |