SOURCES SOUGHT
29 -- Multi Parts Manufacture - Specification - Specification - Specification - Specification - Specification - Specification - Specification - Specification
- Notice Date
- 4/28/2014
- Notice Type
- Sources Sought
- NAICS
- 333911
— Pump and Pumping Equipment Manufacturing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-14-S-11007
- Archive Date
- 5/27/2014
- Point of Contact
- Walter A. Mack, Phone: 4106726162
- E-Mail Address
-
walter.a.mack@uscg.mil
(walter.a.mack@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- P-259-0441 18' Spray Ring P-259-0415 18' Flapper P-513-0486 110 Ventilator P-161-0417 110' Fwd Bearing Housing P-259-0437 8' Flapper Valve Assembly P-259-0472 18' Spray Ring w/ Flanges P-259-0438 8' Flapper Valve P-259-0414 18' Flapper This is a SOURCES SOUGHT NOTICE; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Baltimore, MD to identify sources capable of providing the following: Manufacture, test, package, pack, mark and bar-code the following items in various quantities in accordance with provided specifications and/or drawings. The Government DOES possess the necessary drawings, technical specification, etc. to supply with this requirement. NOTE: Drawings will be made available to potential offerors at the issuance of the solicitation. CLIN 0001 Flange, Exhaust Pipe 18", NSN: 2990-01-460-0214, P/N: 110WPB259-005 ASSY D. General - 18" Lower Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D. CLIN 0002 Flange, Exhaust Pipe 8", NSN: 2990-01-475-9800, P/N:110WPB259-006 ASSY A. General - 8" Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-006 Rev. D Dated 3/25/09 Assembly A. CLIN 0003 Flange, Exhaust Pipe 18", NSN 2990-01-460-0205, P/N: 110WPB259-005 ASSY A. General - Manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D. CLIN 0004 Valve, 18" Flapper Assembly, NSN 4810-01-475-7855, P/N: 110CWP259-003-S. Butterfly Type Exhaust (Flapper) Valve, 18" Diameter, with electric actuator & solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and specification no. P-259-0415 Rev. G dated 2/3/2014. For Starboard side application. CLIN 0005 Flapper Valve Assembly, NSN: 4810-01-475-8271, P/N: 110CWPB259-003-P. Butterfly Type Exhaust (Flapper) Valve, 18" Diameter with electric actuator and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E dated 5/06/2004 and specification P-259-0415 Rev. "G" dated 2/3/2014. For Port side application. CLIN 0006 18" Valve, Flapper, NSN: 4320-01-475-8280, P/N: 110WPB259-003 ASSEMBLY H. Butterfly valve and spray ring assembly for port side application on Coast Guard 110' WPB "C" Class cutters. manufactured, tested, packaged, packed and marked in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E Dated 5/06/2004, assembly "H" and Coast Guard specification P-259-0414 Rev. "F" dated 1/31/2014. Includes upper and lower gaskets, (2) each. CLIN 0007 18" Valve, Flapper, NSN: 4320-01-475-7884, P/N: 110WPB259-003 ASSEMBLY J. Butterfly valve and spray ring assembly for starboard side application on Coast Guard 110' WPB Class cutters. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E, Dated 5/06/2004 and Coast Guard specification P-259-0414 Rev. "F" Dated 1/31/2014. Assemblies "B", "C" AND "J" in accordance with general note 14 on drawing will complete each assembly. CLIN 0008 Housing, Bearing Unit FWD, NSN: 3130-01-442-2863, P/N: 5686719. Manufacture, Inspect, Package and Mark Bearing Housing IAW attached specification P-161-0417 Rev. "C", dated 2/11/2014. Final assembly shall include items 2, 8, 9 and 26 IAW drawing 110CWPB-161-005 Rev. G Dated 03/08/2014. CLIN 0009 Ventilator, Air Circulation, NSN: 2040-01-486-7595, P/N: 110WPB-513-005. Lever operated louvered vent that opens and closes. Manufactured IAW Coast Guard drawing 110 WPB-513-005 Rev. C dated 1/14/2002 and manufacturing specification P-513-0486 Rev. "A" dated 3/19/2014. CLIN 0010 Exhaust System, Engine, NSN: 2990-01-475-9354, P/N: 110WPB259-005-S. Starboard 18" Spray Ring Assembly. Manufactured in accordance with Coast Guard specification P-259-0472 Rev. "C" dated 3/20/2014 and Coast Guard drawing 110WPB 259-005 Rev. C 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and J. CLIN 0011 Exhaust System, Engine, NSN: 2990-01-475-9360, P/N: 110WPB259-005-P. Port 18" Spray Ring Assembly. Manufactured in accordance with Coast Guard specification P-259-0472 Rev. "C" dated 3/20/2014 and Coast Guard drawing 110WPB 259-005 Rev C dated 1/14/2002. In accordance with Note 10 assembly shall include assemblies A, B, C, D and H. CLIN 0012 Valve, Flapper, Pump, NSN: 4320-01-475-8806, P/N: 110WPB259-006 ASSEMBLY C. Flapper Valve Assembly used on the 8" Butterfly Exhaust Valves on the 110' WPB A, B, and C Class Coast Guard vessels. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and SFLC Specification P-259-0438 Rev. "D" dated 2/12/2014. Valve encompasses assemblies B and C in accordance with General Note 13. CLIN 0013 Valve, Flapper, Pump, NSN: 4320-01-475-8677, P/N: 110WPB259-006 ASSEMBLY D. Flapper Valve Assembly used on the 8" Butterfly Exhaust Valves on the 110' WPB A, B, and C Class Coast Guard vessels. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and SFLC Specification P-259-0438 Rev. "D" dated 2/12/2014. Valve encompasses assemblies B and C in accordance with General Note 13. CLIN 0014 Valve, Butterfly, NSN: 4810-01-475-8648, P/N: 110WPB259-006-P. 8" Butterfly Exhaust Valve for use on the Port side of Coast Guard 110' WPB A, B, and C class cutters. Manufactured in accordance with Coast Guard specification P-259-0437 Rev. "C" dated 2/12/2014 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. CLIN 0015 Valve, Butterfly, NSN: 4810-01-475-8415, P/N: 110WPB259-006-S. 8" Butterfly Exhaust Valve for use on the Starboard side of Coast Guard 110' WPB A, B, and C class cutters. Manufactured in accordance with Coast Guard specification P-259-0437 Rev. D Change 1 Dated 7/20/2009 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. CLIN 0016 Spray Ring Assembly, NSN: 2990-01-475-9621, P/N: 110WPB259-005 ASSEMBLY H. Port 18" Spray Ring Assembly. Manufactured in accordance with Coast Guard specification P-259-0441 Rev. "C" dated 3/20/2014 and drawing 110WPB 259-005 Rev. C dated 1/14/2002. IAW note 10, assembly includes Assemblies B, C and H. Does not include companion pipe flanges or hardware. CLIN 0017 Spray Ring Assembly, NSN: 2990-01-475-9620, P/N: 110WPB259-005 ASSEMBLY J. Starboard 18" Spray Ring Assembly. Manufacture in accordance with Coast Guard specification P-259-0441 Rev. "C" dated 3/20/2014 and drawing 110WPB 259-005 Rev. C 1/14/2002. IAW note 10, assembly includes Assemblies B, C and J. Does not include companion pipe flanges or hardware. CLIN 0018 Bolt, Special Tiller, NSN: 5306-99-538-1451, P/N: P3665703-A. General - Manufacture IAW Drawing 110 WPB565-05 Rev. A dated 5/16/2002, PIECE #3, DETAIL 5-E. CLIN 0019 Anode, Propeller Nut, NSN: 5342-01-481-8403, P/N: 87WPB243-001. General - Manufacture IAW Drawing 87WPB-243-001 REV M dated 6/25/2004, ITEM #39. Item inside diameter to be machine finished to proper dimensions IAW drawing. Size of anode is 5.5" I.D. X 6.625" O.D. x 6.375" L. CLIN 0020 Nut, Bronze, NSN: 2010-01-458-9217, P/N: 87WPB243-001 ITEM 2. General - Manufacture In accordance with Drawing 87WPB 243-001 REV. "M" dated 6/25/2004. B.O.M. Item Number 2. CLIN 0021 Nut, Hex, Self Locking, NSN: 5310-01-458-9125, P/N: 87WPB243-001 ITEM 3. General - Manufactured IAW Coast Guard Drawing 87WPB 243-001 REVISION "M" dated 6/25/2004. B.O.M. Item Number 3. Anticipated Period of Performance: It is anticipated that a firm, fixed priced, 5 year contract will be awarded for this requirement. (Subject to change at the discretion of the Government) Anticipated NAICS Code/Size Standard: The applicable NAICS Code is 333911, Pump and Pumping Equipment Manufacturing and the size standard is 500 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to walter.a.mackjr@uscg.mil no later than May 12, 2014 12:00 p.m., Eastern Time with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 333911. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 333911. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 333911. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 333911. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. CCR: Interested parties should register in the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. The CCR can be obtained by accessing the internet at www.ccr.gov or by calling 1-888-227-2423. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/HSCG40-14-S-11007/listing.html)
- Record
- SN03349890-W 20140430/140428234227-59bc0cc9a407675edd0d2d6262fd61cc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |