MODIFICATION
91 -- LUBRICANT
- Notice Date
- 5/5/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- HWY 155 WHSE B, Door 6 Industial Area, Grand Coulee, WA 99133
- ZIP Code
- 99133
- Solicitation Number
- R14PS17124
- Response Due
- 5/6/2014
- Archive Date
- 11/2/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is R14PS17124 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-73. The associated North American Industrial Classification System (NAICS) code for this procurement is 324191 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-05-06 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be GRAND COULEE, WA 99133 The DOI BOR Grand Coulee Power Office requires the following items, Brand Name or Equal, to the following: LI 001: LUBRICANT, OIL, TYPE SAE 15W-40, MULTI-GRADE, RE-REFINED ENGINE VISCOSITY, OIL LUBE MUST MEET OR EXCEED SERVICE CLASSIFICATION CC, CD, SE, AND SF AS WELL AS MACK EO-J, ALLISON C-3 AND CATERPILLAR TO-2, CHEVRON DELO 400 PLUS15W-40 NO.CPS238154 OR ARCO ENVIROIL, PRODUCT CODE AENV1540 (RECYCLED OIL) SAE 15W-40, FURNISHED IN QTS, 12 QTS PER BOX, MSDS 3540, OR EQUAL, 30, BOXES; LI 002: LUBRICANT, OIL, SYNTHETIC, ENGINE, 2 CYCLE, PREMIUM SYNTHETIC BLEND OIL FOR WATER COOLED 2 CYCLE OUTBOARDS AND 2 CYCLE ENGINES THAT SPECIFY TC-W3 CERTIFIED OILS, FURNISH IN 1 GALLON CONTAINERS, MSDS 5388, EVINRUDE PART NO. XD-50, CASTROL PART NO. XSAT12497, OR EQUAL, 3, GALLONS; LI 003: GREASE, MOLYBDENUM DISULFIDE, RED, EXTREME PRESSURE, HIGH TEMPERATURE, PREMIUM BASE OIL, ALUMINUM COMPLEX BASE WITH POLYMITE, ADHESIVE AND COHESIVE POLYMER TACKINESS AGENTS, RUST AND CORROSION INHIBITORS, ANTI-WEAR AND FRICTION REDUCING ADDITIVES, OXIDATION INHIBITORS, SOLUMOL R FOR A CLEAR, NONSTAINING BARRIER FILM FOR FURTHER EP AND HEAVY LOAD PROTECTION, LOW SOLIDS FOR LOWERED OPERATING NOISE IN ANTI-FRICTION BEARINGS, AND TRANSPARENT RED COLOR ADDITIVE FOR VISUAL CHECK OF CONTAMINATED/OXIDIZED GREASE. FURNISH IN 14 OZ CARTRIDGE, 48 CARTRIDGES PER CASE, LUBEMASTER PREMALUBE RED, MSDS 4001,, 1, CAR; LI 004: GREASE, LUBRICATING, TURBINE, GENERAL CHARACTERISTICS: EXTREME PRESSURE, HEAVY GRADE, HIGH-VISCOSITY, PETROLEUM BASE REQUIRED, ADDITIVES INCLUDE ANTI-WEAR, RUST AND OXIDATION INHIBITORS, LITHIUM OR LITHIUM COMPLEX THICKENER/SOAP TYPE, NO GRAPHITE ADDITIVE(S) ALLOWED, SUITABLE FOR UNDERWATER APPLICATIONS, BETWEEN BOTH FERROUS AND NON-FERROUS (BRONZE JOURNAL) MATERIALS, SEAL COMPATIBILITY MUST INCLUDE BUNA-N, NEOPRENE, TEFLON, SILICONE, AND VITON, SPECIFIC CHARACTERISTICS, PROPERTIES & TEST RESULTS: NLGI NUMBER OF 1.5 OR 2, SHEAR STABILITY (ASTM D-217-94); TYPICAL FOR NLGI 1.5 TO 2, WITH NO MORE THAN 10% VARIATION BETWEEN "WORKED" AND "PROLONGED WORKED" TEST RESULTS, TIMKEN OK LOAD TEST (ASTM D-2509-93); NOT LESS THAN 50 LBS, USEABLE TEMPERATURE RANGE; 0 TO 350 DEGREES F, WATER WASHOUT (ASTM D-1264-96); LESS THAN OR EQUAL TO 5%. MUST PASS RUST TEST (ASTM D-1743-94), 5 YEAR SHELF LIFE, FURNISHED IN NON-RETURNABLE, 400 LB METAL DRUM CAPACITY, MSDS 3901, CHEVRON ULTI-PLEX EP2, MOBILGREASE HTM, DUBOIS CLG-2, OR EQUAL, 10, DRUMS; LI 005: LUBRICANT, GEAR OIL, EXTRA HEAVEY GEAR SHIELD, FURNISH IN 16 OZ AEROSOL CAN, MSDS 5132, OR MSDS 5014, MOBILE MOBILTAC E, LUBRIPLATE PART NO. 15263, OR EQUAL, 24, EACH; LI 006: LUBRICANT, OIL CYLINDER, WORM GEARS, VICOSITY RATING: CST AT 40 DEGREES CENTIGRADE 375, AT 100 DEGREES CENTIGRADE 29.0, SUS AT 100 DEGREES FAHRENHEIT 2000, AT 210 DEGREES FAHRENHEIT 142, FURNISN IN 5 GALLON CAN, MOBIL 600 W CYLINDER OIL, MSDS 1866, OR EQUAL, 2, CANS; LI 007: GREASE, CHEVRON BLACK PEARL, FURNISH 14 OZ CARTRIDGES, 10 PER CASE, MSDS 3893, EP-NLGI-2, OR EQUAL, 2, CASES; LI 008: LUBRICANT, LIQUID SILICONE, HEAVY DUTY, IN 12-OUNCE AEROSOL CAN, MSDS 1007 MAINTENANCE WAREHOUSE PART NO. 111555, GRAINGER 4ZF08, OR EQUAL, 20, CANS; LI 009: LUBRICANT, OIL, PNEUMATIC TOOL, FURNISH IN 15 FL. OZ. CONTAINER, MSDS 4142, STA-LUBE SL2531, OR EQUAL, 24, EACH; LI 010: LUBE, WIRE PULLING, FURNISH IN 1 QUART SQUEEZE CONTAINER, GARDNER BENDER SUPER SLICK PART NO. 79-401, 3M PART NO. WLC-QT, OR EQUAL, IDEAL YELLOW 77 NOT ACCEPTABLE, 24, EACH; LI 011: LUBRICANT, GRAPHITE SUSPENDED, POLYOLESTER, LIGHT VISCOSITY, -40 TO 150 DEGREE C TEMPERATURE RANGE, FURNISHED IN 1 LB JAR, MSDS 5191, NYE LUBE NYOGEL 753G, OR EQUAL,, 4, EACH; LI 012: LUBRICANT, GREASE, 0-RING, SILICONE, WHITE, SLIGHT ODOR, SWELLS RUBBER FOR BETTER SEALING, OXIDATION RESISTANT, SERVICEABLE FROM -85 DEGREES F TO 351 DEGREES F, FURNISH IN 5.3 OZ TUBE, MSDS 5235, DOW CORNING MOLYKOTE 55, OR EQUAL, 8, EACH; LI 013: LUBRICANT, SILICONE, MOLYKOTE III, TUBES KEEP CONSISTENCY TO 500 DEGREES F, DOW CORNING 111, MSDS 1082, GRAINGER 6Y762, OR EQUAL, 80, EACH; LI 014: GREASE, GE, RED, HI-TEMP, FURNISH IN 4 OZ TUBE, MSDS 3743, PHILIDELPHIA BREAKER PRODUCTS OPERATION PART NO. 0183L907P037, OR EQUAL, 6, EACH; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOI BOR Grand Coulee Power Office intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOI BOR Grand Coulee Power Office is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. See attached Clause document
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/7a9845f14d623694b8d3bd7ac2419869)
- Place of Performance
- Address: GRAND COULEE, WA 99133
- Zip Code: 99133
- Zip Code: 99133
- Record
- SN03356736-W 20140507/140505234130-7a9845f14d623694b8d3bd7ac2419869 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |