SOLICITATION NOTICE
48 -- Water Main Parts, Gate Valves, Tees, 90 Degree Elbows
- Notice Date
- 5/7/2014
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Great Lakes Office, Great Lakes, IL 60088
- ZIP Code
- 60088
- Solicitation Number
- N00189-14-T-M015
- Response Due
- 5/9/2014
- Archive Date
- 11/5/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N00189-14-T-M015 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-73. The associated North American Industrial Classification System (NAICS) code for this procurement is 332911 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-05-09 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Great Lakes, IL 60088 The FLC - Norfolk requires the following items, Brand Name or Equal, to the following: LI 001: 8" MJ-D/I GATE VALVE, 8" DUCTILE IRON GATE VALVE W/MECHANICAL JOINT CONNECTION. VALVES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE FITTINGS/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF VALVE SHALL BE OF ONE MANUFACTURER. ALL GATE VALVES OR CORPORATION STOPS SHALL BE COUNTER-CLOCKWISE TO OPEN. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE VALVE--AWWA-C509 OR AWWA C515, GRADE 5 CONNECTION BOLTS, INTERIOR LINING-AWWA C550, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 002: 12" MJ-D/I GATE VALVE, 12" DUCTILE IRON GATE VALVE W/MECHANICAL JOINT CONNECTION. VALVES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE FITTINGS/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF VALVE SHALL BE OF ONE MANUFACTURER. ALL GATE VALVES OR CORPORATION STOPS SHALL BE COUNTER-CLOCKWISE TO OPEN. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE VALVE--AWWA-C509 OR AWWA C515, GRADE 5 CONNECTION BOLTS, INTERIOR LINING-AWWA C550, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 2, EA; LI 003: 12" MJ-D/I TEE, 12" DUCTILE IRON STRAIGHT TEE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 004: 12" x 8" MJ-D/I TEE, 12" X 8" DUCTILE IRON STRAIGHT TEE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 005: 12" x 6" MJ-D/I TEE, 12" X 6" DUCTILE IRON STRAIGHT TEE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 006: 12" MJ-D/I 90 DEG. BEND, 12" DUCTILE IRON 90/ELBOW W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 2, EA; LI 007: 12" MJ-D/I 45 DEG. BEND, 12" DUCTILE IRON 45/ELBOW W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 2, EA; LI 008: 12" MJ-D/I SOLID SLEEVE, 12" DUCTILE IRON LONG SOLID SLEEVE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 5, EA; LI 009: 12" MJ-D/I CUT-IN SLEEVE, 12" DUCTILE IRON CUT-IN SLEEVE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 010: 12" MJ D/I CAP, 12" DUCTILE IRON CAP FITTING W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 3, EA; LI 011: 12" MJ-D/I ACCESSORY KIT, 12" DUCTILE IRON MECHANICAL JOINT CONNECTION FITTING ACCESSORY PACK. ACCESSORIES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF ACCESSORY PACKS SHALL BE OF ONE MANUFACTURER. GRADE 5 BOLTS REQUIRED. MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 24, EA; LI 012: 12" MJ-D/I ACCESSORY KIT MEGA LUG, 12" DUCTILE IRON MECHANICAL JOINT CONNECTION FITTING MEGA LUG ACCESSORY PACK. ACCESSORIES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF ACCESSORY PACKS SHALL BE OF ONE MANUFACTURER. GRADE 5 BOLTS REQUIRED. MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 4, EA; LI 013: 10" MJ-D/I CAP,10" DUCTILE IRON CAP FITTING W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 2, EA; LI 014: 12" DUCTILE IRON PIPE,12" IN DIAMETER X 18 FT IN LENGTH DUCTILE IRON "PUSH-ON" WATER MAIN PIPE, REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE PIPE AWWA-C151 PRESSURE CLASS 52, INTERIOR LINING - AWWA C104, EXTERIOR PROTECTION AWWA C105 POLYETHYLENE ENCASEMENT, MATERIAL TO BE MAKE IN USA, (Brand Name or Equal), 414, FT; LI 015: 8" DUCTILE IRON PIPE,8" IN DIAMETER X 18FT IN LENGTH DUCTILE IRON "PUSH-ON" WATER MAIN PIPE, REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE PIPE-AWWA-C151 PRESSURE CLASS 52 INTERIOR LINING-AWWA C104, EXTERIOR PROTECTION AWWA C105 POLYETHYLENE ENCASEMENT, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 18, FT; LI 016: B-BOS FOR CURB STOP,TYLER-95 E WITH ENLARGED BASE MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 017: 8" MJ-D/I SOLID SLEEVE,8" DUCTILE IRON LONG SOLID SLEEVE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 018: 8" MJ-D/I CUT-IN SLEEVE,8" DUCTILE IRON CUT-IN SLEEVE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 019: 8" MJ-D/I ACCESSORY KIT,8" DUCTILE IRON MECHANICAL JOINT CONNECTION FITTING ACCESSORY PACK. ACCESSORIES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF ACCESSORY PACKS SHALL BE OF ONE MANUFACTURER, GRADE 5 BOLTS REQUIRED. MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 4, EA; LI 020: 8" MJ-D/I ACCESSORY KIT MEGA LUG,8" DUCTILE IRON MECHANICAL JOINT CONNECTION FITTING MEGA LUG ACCESSORY PACK. ACCESSORIES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF ACCESSORY PACKS SHALL BE ON ONE MANUFACTURER. GRADE 5 BOLTS REQUIRED, MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 021: 6" DUCTILE IRON PIPE,6" IN DIAMETER X 18 FT IN LENGTH DUCTILE IRON "PUSH-ON" WATER MAIN PIPE, REQUIRED MATERIAL SPECIFICATIONIS: DUCTILE IRON PRESSURE PIPE AWWA-C151 PRESSURE CLASS 52 INTERIOR LINING AWWA C104, EXTERIOR PROTECTIONS AWWA C105 POLYETHYLENE ENCASEMENT, MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 18, FT; LI 022: 6" MJ-D/I CUT-IN SLEEVE,6" DUCTILE IRON CUT-IN SLEEVE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA. (Brand Name or Equal), 1, EA; LI 023: 6" MJ-D/I SOLID SLEEVE,6" DUCTILE IRON LONG SOLID SLEEVE W/MECHANICAL JOINT CONNECTION. FITTINGS SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF FITTING SHALL BE OF ONE MANUFACTURER. REQUIRED MATERIAL SPECIFICATIONS: DUCTILE IRON PRESSURE FITTING--ANSI/AWWA C110/A21.10 FITTINGS ARE CEMENT-LINED AND SEAL COATED IN ACCORDANCE WITH ANSI/AWWA C104/A21.4 SHALL MEET NSF 61 STANDARD, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 024: 6" MJ-D/I ACCESSORY KIT MEGA LUG,6" DUCTILE IRON MECHANICAL JOINT CONNECTION FITTING MEGA LUG ACCESSORY PACK. ACCESSORIES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF ACCESSORY PACKS SHALL BE OF ONE MANUFACTURER, GRADE 5 BOLTS REQUIRED, MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 2, EA; LI 025: VALVE BOX FOR MAIN LINE VALVES,ADJUSTABLE, VALVE BOX FOR MAIN LINE VALVES CAST -664 S, MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 4, EA; LI 026: POWERSEAL 12" X 2", SERVICE SADDLE-3412 AS, LIVE TAPPING SADDLE FOR DUCTILE WATER MAIN PIPING, MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 027: 2" CORP STOP FOR TAPPING SADDLE, CORPORATION STOP VALVE MPT.X FLARED CONNECTION FOR TAPPING SADDLE. MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 028: 2" CURB STOP FLARE CONNECTION, FLARED CONNECTION CURB STOP, MATERIAL TO BE MADE IN USA, (Brand Name or Equal), 1, EA; LI 029: 10" MJ-D/I ACCESSORY KIT MEGA LUG,10" DUCTILE IRON MECHANICAL JOINT CONNECTION FITTING MEGA LUG ACCESSORY PACK. ACCESSORIES SHALL BE THE SAME DIAMETER AND HAVE THE SAME MECHANICAL JOINT ENDS AS THE VALVES/PIPE TO WHICH THEY ARE INSTALLED. EACH SIZE/TYPE OF ACCESSORY PACKS SHALL BE OF ONE MANUFACTURER, GRADE 5 BOLTS REQUIRED, MATERIALS TO BE MADE IN USA, (Brand Name or Equal), 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Norfolk intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Norfolk is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The NAICS code is 332911 and the Small Business Standard is 500. FAR 52.247-34, F.o.b. Destination applies 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.204-10 Reporting Subcontract Awards. 52.219-28 Post-Award Small Business Program Rerepresentation. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-36 Affirmative Action for Workers w/ Disabilities 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 252.211-7003 Item Identification & Valuation (AUG 2008) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.247-7023 (iv) Alt III - ALTERNATE III (MAY 2002) 252.247-7023. -252.225-7000: Buy American Act-Balance of Payments Program Certificate 252.232-7010: Levies on Contract Payments 5252.NS-046P: Prospective Contractor Responsibility 52.212-4: Contract Terms and Conditions-Commercial Items 52.212-1: Instructions to Offerors-Commercial Items 52.252-1:Solicitation Provisions Incorporated by Reference 52.252-2: Clauses Incorporated by Reference 52.237-2: Protection of Government Buildings, Equipment, and Vegetation. Prohibition on Contracting with Inverted Domestic Corporations Representation (May 2012) Prohibition on Contracting with Inverted Domestic Corporations (May 2012) Control of Government Personnel Work Product (April 1992) Representation Regarding Conviction of a Felony Criminal Violation Under and Federal or State Law (Mar 2012) Requirements Relating to Compensation of Former DOD Officials (Sep 2011) Buy American Act & Balance of Payments (Oct 2011) System for Award Management
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00189/N00189-14-T-M015/listing.html)
- Place of Performance
- Address: Great Lakes, IL 60088
- Zip Code: 60088-3420
- Zip Code: 60088-3420
- Record
- SN03359741-W 20140509/140507234704-d34d6a5fef3ec512806dc9412dfe09d1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |