SOLICITATION NOTICE
51 -- Trumpf Parts
- Notice Date
- 5/12/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- SPMYM3 DLA Maritime KM, Portsmouth Naval Shipyard Portsmouth Naval Shipyard Portsmouth, NH
- ZIP Code
- 00000
- Solicitation Number
- SPMYM314Q3051
- Response Due
- 5/16/2014
- Archive Date
- 5/31/2014
- Point of Contact
- Rachel Toracinta 207-438-6818
- E-Mail Address
-
rachel.toracinta@navy.mil
(rachel.toracinta@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6 and FAR Subpart 13.1, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS (https://www.fbo.gov/)and NECO (http://www.neco.navy.mil/). The RFQ number is SPMYM3-14-Q-3038. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-73 and DFARS Change Notice 20140506. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 333515 and the Small Business Standard is 500 Employees. This is a sole sourced action. DLA Maritime - Portsmouth, Kittery, ME Contracting Office requests responses from qualified sources capable of providing: CLIN 0001: TRUMPF DIE EV W20 / 84 DEG R2 2050 B: Total Quantity of 1 EA.. CLIN 0002: TRUMPF DIE EV W20 / 84 DEG R2 2050 B: Total Quantity of 1 EA.. CLIN 0003: TRUMPF FOLDING TOOL FWZ 100 / 2050 B: Total Quantity of 1 EA.. CLIN 0004: TRUMPF PUNCH OW210 / S R1 / 28 DEG 140 / 2050 B: Total Quantity of 1 EA.. CLIN 0005: TRUMPF PUNCH OW280 / K R0, 5 / 80 DEG 140 / 2050 B: Total Quantity of 1 EA. CLIN 0006: TRUMPF PUNCH OW202 / S R1 / 28 DEG 220 / 2050 B: Total Quantity of 1 EA. CLIN 0007: TRUMPF DIE EV / H W 12 / 84 DEG R1 2050 B: Total Quantity of 1 EA.. CLIN 0008: TRUMPF DIE (1272803) EV / H W8 84 DEG 2050 B: Total Quantity of 1 EA.. CLIN 0009: TRUMPF SCREW DIN 6912 - m8 X 25: Total Quantity of 1 EA.. CLIN 0010: TRUMPF SCREW DIN 6912 - 38X30: Total Quantity of 1 PK. CLIN 0012: TRUMPF PUNCH OW201 / S R1 / 86 DEG 220 / 2050B: Total Quantity of 1 EA.. This requirement is sole sourced to Trumpf Incorporated due to compatibility with existing equipment. Negotiations are to be conducted with Trumpf Incorporated. This requirement will be Lowest Price Technically Acceptable (LPTA), although PPIRS (Past Performance Information Retrieval System) will be used to screen past performance. Delivery is within 90 DAYS ADC; Delivery Location is Portsmouth Naval Shipyard, Receiving Officer, Bldg 170, Code 501.2, Kittery, ME 03904. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: Applicable FAR clauses: 52.204-7, 52.211-15, 52.212-2. 52.212-4, 52.212-5 (see below), 52.213-1, 52.223-11, 52.232-1, 52.232-18, 52.232-39, 52.233-1, 52.242-15, 52.242-17, 52.246-1, 52.247-34, 52.252-2, 52.252-6, and 52.253-1. Under Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including: 52.204-10, 52.209-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-13, 52.232-36 (if GCPC is utilized as the method of payment). Additional contract terms and conditions applicable to this procurement are: DFARS Clauses: 252.203-7000, 252.203-7002, 252.204-7003, 252.204-7004 (ALT A), 252.211-7003 ALT I, 252.225-7008, 252.225-7021 ALT 1, 252.225-7039, 252.227-7013, 252-227-15, 252.227-7037, 252.232-7003 and 252.232-7006 (if WAWF is utilized as method of payment) 252.232-7010, 252-225-7036 ALT 1, 252.237-7010, 252.237-7019, 252.243-7001, 252.247-7003, 252.247-7023, 252.247-7023 ALT III and 252.247-7024 DLAD Provision: 52.215-9023. The Government may choose to hold a reverse auction for this material after quotations are received and the solicitation is closed. This announcement will close at 02:30 PM EST on May 16, 2014. Contact Sandra Marlow at 207-438-6818/Rachel.Toracinta@navy.mil.[A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government.] All responsible sources may submit a quote which shall be considered by the agency. To be awarded on an All or None basis. METHOD OF PROPOSAL SUBMISSION: The NECO website has a submit bid button next to the solicitation number. DO NOT use the submit bid button on NECO to submit your proposal. Offers MUST be submitted by fax to 207-438-1251. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. Wide Area Work Flow (WAWF). Quoter's must be registered in WAWF to be considered for award unless government purchase card is utilized for procurement. Registration can be completed on-line at https://wawf.eb.mil. The WAWF Assistance Line is also available at 1-866-618-5988. All quotes shall include price(s) FOB Destination, a point of contact, name, email, fax, and phone number, GSA contract number if applicable, business size, country product of origin, place of manufacture, delivery time, payment terms, if registered in WAWF and/or if quoter accepts payment by Government Purchase Card. Quoter's shall include a completed copy of 52.212-3 and its ALT I with quotes unless vendor is registered in SAM. If registered, please so state on quote and affirm representations and certifications are up to date. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. When submitting a quote it is very important that all offerors understand it is their responsibility to ensure they meet all requirements of the RFQ, not just those requirements stated in the specification such as terms and conditions, representations and certifications. The quote should not simply rephrase or restate the Government ™s requirements, but rather shall provide substantiation as to how the offeror intends to meet the requirements. ******* End of Combined Synopsis/Solicitation ********
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a2cdfe624c607c18476a4d7faf4c6230)
- Record
- SN03363981-W 20140514/140512234733-a2cdfe624c607c18476a4d7faf4c6230 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |