MODIFICATION
54 -- Globaltruss Equip and Lighting
- Notice Date
- 5/22/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- 681 Hardee Pl, West Point, NY 10928
- ZIP Code
- 10928
- Solicitation Number
- W911SD-14-T-0172
- Response Due
- 5/23/2014
- Archive Date
- 11/19/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W911SD-14-T-0172 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-73. The associated North American Industrial Classification System (NAICS) code for this procurement is 335129 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-05-23 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be West Point, NY 10996 The MICC West Point requires the following items, Brand Name or Equal, to the following: LI 001: Globaltruss SQ-4114 - 9.84ft. (3.0m) SQUARE SEGMENT Minimum Requirements: EACH SEGMENT IS 3 METTERS IN LENGTH WEIGHT OF EACH SEGEMENT IS NOT TO EXCEED 45 LBS. FABRICATED BY CERTIFIED TUV WELDERS EQUIPPED WITH CONNECTING HARDWARE TO CONNECT TO CREATE A LONGER 11 7/16" (290mm) OVERALL WIDTH 2" (50mm) OUTER DIAMETER TUBING 3/4" (20mm) DIAGONAL BRACING 0.08" (2mm) WALL THICKNESS, 6, EA; LI 002: Globaltruss SQ-4111 -1.5M Square Segment MINIMUM REQUIREMENTS: EACH SEGMENT WILL BE 1.5 METERS IN LENGTH WEIGHT OF EACH SEGMENT NOT TO EXCEED 40 LBS. FABRICATED BY CERTIFIED WELDERS EQUIPPED WITH CONNECTING HARDWARE FOR ADDITIONAL SEGMENTS 11 7/16" (290mm) OVERALL WIDTH 2" (50mm) OUTER DIAMETER TUBING 3/4" (20mm) DIAGONAL BRACING 0.08" (2mm) WALL THICKNESS UNIT WEIGHT 40 LBS, 4, EA; LI 003: Globaltruss ST-180 - 18 ft Extre Heavy Duty Crank MINIMUM REQUIREMENTS: MUST BE ABLE TO REACH 5.5 METERS MAX LOAD FULLY EXTENDED 435 LBS UNIT CANNOT EXCEED 235 LBS MUST WORK WITH TRUSS ADAPTER IN CLIN 0006 TO CONNECT TRUSS TO STAND, 2, EA; LI 004: Globaltruss ST-132 - 13 ft Medium Duty Crank MINIMUM REQUIREMENTS: MAX HEIGHT MUST EXCEED 13 FT. MAX LOAD MUST EXCEED 215 LBS FOOTPRINT CANNOT EXCEED 64 IN. BY 64 IN. UNIT CANNOT WEIGH OVER 60 LBS. MUST WORK WITH TRUSS ADAPTER IN CLIN 0006 TO CONNECT TRUSS TO STAND, 2, EA; LI 005: Globaltruss DT-3800L - Truss Lifter MINIMUM REQUIREMENTS: MAX HEIGHT MUST EXCEED 12 FT. EACH UNIT CANNOT EXCEED 40 LBS. MAX LOAD MUST EXCEED 175 LBS. FOOTPRINT CANNOT EXCEED 48 IN BY 48 IN, 2, EA; LI 006: Globaltruss STSB-005 - Truss Adapter MINIMUM REQUIREMENTS MUST BE COMPATABLE WITH CLINS 0001-0005 MUST BE AT LEAST 18 IN WIDE WITH ADJUSTABLE LATCHES TO CONNECT TRUSS TO STAND., 6, EA; LI 007: Globaltruss Mini 360 QR - Clamp MINIMUM REQUIREMENTS: MUST BE ABLE TO HOLD MINIMUM OF 215 LBS CLAMP MUST WORK WITH UP TO 2 IN. PIPE CLAMP MUST NOT REQUIRE ADDITIONAL TOOLS TO SECURE AND RELEASE, 20, EA; LI 008: Safety Cable Black - 1/8 x 30" USED TO SECURE LIGHT TO TRUSS IN CASE OF CLAMP FAILURE, 30, EA; LI 009: Chauvet Pinspot 2 LED MINIMUM REUIREMENTS: WHITE LED LIGHT AT 3 WATTS / EXCEED 45,000 HOURS BEAM ANGLE KITS THAT ALLOW FOR 6 DEG AND 9 DEG USEAGE INPUT VOLATAGE 100-240 vac POWER CURRENT USAGE 4 WATTS AT 120 VAC 60 HZ AND 230 VAC 50 HZ WEIGHT CANNOT EXCEED 1 LBS EACH SIZE MUST BE SMALLER THAN 8 IN X 4.5 IN X 6.2 IN, 4, EA; LI 010: Chauvet MB20 - Mirror Ball MINIMUM REQUIREMENTS: 20 IN MIRROR BALL MUST BE ABLE TO BE MOUNTED TO A MOTOR CANNOT EXCEED 15 LBS, 1, EA; LI 011: Chauvet MOT-2 - Mirror Ball Motor MINIMUM REQUIREMTS: MUST HAVE A LOAD CAPACITY OF AT LEAST 15 LBS MUST BE ABLE TO RUN OFF 120 VAC 60 HZ OR 230 VAC 50 HZ POWER MUST WEIGHT LESS THAN 1.5 LBS MUST WORK WITH CLIN 0010, 1, EA; LI 012: Hanson HPS-BPWDMXLED (Quatro case of 12) (Black) QUATTRO 11-10 WATT RGBWA BATTERY POWERED WIRELESS DMX LED FIXTURE MINIMUM REQUIREMENTS: 12 LED Fixtures and charging case Battery Powered & Wireless DMX Rechargeable Battery with up to 12 hours of battery life Wireless AND WIRED DMX-512 protocol Built in 2.4G receiver / transmitter for wireless DMX operation 126 auto jumping channel frequencies, high anti-jamming ability to ensure work reliability 7 ID codes for multiple transmitters and receiver use Wired DMX-512 protocol 3-pin DMX input and output connectors RGBWA color mixing 324 - 5mm Watt LED - 81 red, 81 green, 81 blue, 81 white 40 degree lenses Electronic Dimming 0-100% Operation menu with function buttons and DMX control mode LED display for address and function setting Control DMX channels 3, 4, 10 or 36 CH Strobe 1-255 / Color strobe 1-255 Operation modes: DMX, Sound Active and Auto Modes Built in microphones for sound active mode LED chases Bracket for floor stand and / or hanging mount Dual eye bolts for safety cables Less than 12 Pounds per unit AC power auto ranging (100-240v 50/60HZ) In/Out Charging Road Case for 12 Fixitures with locking casters Built in cooling system to prevent overheating Case to power plug-in system that will recharge fixtures in 5 hours Case to fixture cables Cases should be stackable. Less than 100 lbs. Includes: (1) 110v Edison plug to PowerCon and (1) PowerCon jumper cable Battery durability: over 500 charge cycles, 2, EA; LI 013: Minimum Requirements: Wireless Solutions W-DMX Blackbox T-1 G4 Or Single Universe Outdoor DMX/RDM Transmitter/Receiver Complete DMX 512 support Full RDM support W-DMX G4 Protocol # backward compatible with G3 High-Fidelity Technology -Output matches Input Wireless Fidelity and Error correction Less Than 5ms Latency Adaptive Frequency Hopping Radio 2.4GHz radio # license free worldwide 5.8GHz dualband # provides access to #virgin# spectrum Expandable with Ethernet lighting protocol support 12V Support Includes 2dBi indoor antenna Interchangeable antennas options Compatible with all W-DMX OEM products, 1, EA; LI 014: HPS-IR-K Or Wireless Infrared remote controller Wirelessly controls all Hanson Pro Systems fixtures simultaneously Control intensity, colors, strobe and strobe speed, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC West Point intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC West Point is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the System for Award Management (SAM) database before an award can be made to them. If the offeror is not registered in the SAM, it may do so through the SAM website at https://www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5 (DEV), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, and the following clauses: 52.219-28, 52.222-19, 52.222-21, 52.22-22, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.225-13, 52.232-34, 52.232-99 (DEV), 52.233-4 and DFAR 252.212-7001, 252.232-7003, 252.232-7010, 252.232-7006 and 252.209-7999. The full text of the referenced FAR clauses may be accessed electronically at http://farsite.hill.af.mil/VFFAR1.htm See "clauses" attached for complete list of clauses.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/38a85ca0f06020932485c590a46c92d6)
- Place of Performance
- Address: West Point, NY 10996
- Zip Code: 10996
- Zip Code: 10996
- Record
- SN03374337-W 20140524/140522235511-38a85ca0f06020932485c590a46c92d6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |