SOLICITATION NOTICE
93 -- Cross Vane Panel Traps
- Notice Date
- 5/23/2014
- Notice Type
- Presolicitation
- NAICS
- 326199
— All Other Plastics Product Manufacturing
- Contracting Office
- Department of Agriculture, Animal and Plant Health Inspection Service, Administrative Services Division/Contracting, 100 North 6TH Street, Butler Square 5TH Floor, Minneapolis, Minnesota, 55403
- ZIP Code
- 55403
- Solicitation Number
- AG-6395-S-14-0084
- Archive Date
- 8/15/2014
- Point of Contact
- Leah H. Schultz, Phone: 6123363625
- E-Mail Address
-
leah.h.schultz@aphis.usda.gov
(leah.h.schultz@aphis.usda.gov)
- Small Business Set-Aside
- N/A
- Description
- USDA, APHIS, Plant Protection and Quarantine (PPQ) has a requirement for cross-vane panel traps. The cross-vane panel trap is a generic trap that is used in conjunction with lure dispensers to attract bark beetles, ambrosia beetles, longhorn beetles and wood borers (Czokajlo et al., 2001). The trap simulates a tree of large diameter and provides a large surface area to maximize trapping (Czokajlo et al., 2001). The trap is made from light-weight, corrugated plastic and is water- and weather-resistant. The trap consists of two intersecting panels and a top and bottom made of corrugated plastic board. Description of Traps: The trap consists of two intersecting panels and a top and bottom made of corrugated plastic board. In the middle section of the panels, there is a 3 inch x 6 inch cutout in the panels where the lure(s) is placed. The total height of the trap, including the collection cup, is 48 inches. The top and bottom of the trap may either be creased several times around the trap, as in Figure 1, or creased four times, one on each side of the cross-vanes, as in Figure 2. • Dimensions of each cross panel: 32 inches x 12 inches • Trap top: 22 inches x 26 inches • Trap bottom: 22 inches x 26 inches • Trap body (panels, top, and bottom): 1/8 inch (3mm) black corrugated plastic board The intent is to award a 5-year IDIQ fixed price contract with the estimated spend for the kits are estimated not to exceed $1 million over a five year contract. This procurement is set-aside for small businesses in accordance with FAR Part 19. The North American Industry Classification System (NAICS) code is 326199 with a small business size standard of 500 employees. Solicitation number AG-6395-S-14-0084 will posted on or about May 23, 2014. Any questions or inquiries must be e-mailed to the Contracting Office, to the attention of the point of contact listed in this notice. Requests by telephone will not be honored. Point of contact: Leah Schultz, Contracting Specialist, e-mail: leah.h.schultz@aphis.usda.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USDA/APHIS/Contracting/AG-6395-S-14-0084/listing.html)
- Record
- SN03375345-W 20140525/140523234409-c0117bf67c762314f59a98505c77ef72 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |