SOLICITATION NOTICE
H -- Annual Inspection and preventative maintenance on the 5 AC and 8 DC engine dynam
- Notice Date
- 5/27/2014
- Notice Type
- Presolicitation
- NAICS
- 541330
— Engineering Services
- Contracting Office
- CPODUS Environmental Protection Agency26 West Martin Luther King DriveMail Code: NWDCincinnatiOH45268USA
- ZIP Code
- 00000
- Solicitation Number
- RFQ-OH-14-00106
- Response Due
- 6/11/2014
- Archive Date
- 7/11/2014
- Point of Contact
- Gerold Young
- E-Mail Address
-
Young.Gerold@epa.gov
(young.gerold@epa.gov)
- Small Business Set-Aside
- N/A
- Description
- In accordance with FAR Parts 12 Commercial Items and FAR Part 13 Simplified Procedures, The U.S. Environmental Protection Agency (EPA), Testing & Advanced Technology Division (TATD), National Vehicle and Fuel Emissions Laboratory (NVFEL), Ann Arbor, Michigan, requires a contractor to perform an annual inspection and preventative maintenance on (5) AC and (8) DC Engine Dynamometers. Details regarding model number serial number and other dynamometer information will be provided in the Statement of Work. The contractor shall provide a service agreement to supply parts and repair services for a one year base plus (4) one year option periods. The service agreement shall cover all necessary repairs including labor and parts up to the total awarded amount after all preventative service billing is completed. Information regarding service, schedule, and other important conditional information will be provided in the Statement of Work The following is a list of work to be performed on each AC Dynamometer: Lock Out and Set Up Record Dynamometer nameplate information Remove all covers and disconnect leads Meggar all circuits on Dynamometer and Motors including oil pump and blowers Check AC components with Surge Test or comparable method Conduct Polarization Index test on all circuits/fields Inspect air filters and clean or replace if necessary Inspect oil filters and clean or replace if necessary Grease Units if necessary Run auxiliary components and check trunion for ease of movement Run dynamometer at normally rated speed Perform vibration analysis of dynamometer through its speed range on all three axes Reinstall all covers Clean up work area and remove lockouts The following is a list of work to be performed on each DC Dynamometer: Lock Out and Set Up Record Dynamometer nameplate information Remove all covers and disconnect leads Meggar all circuits on Dynamometer and Motors Record field resistance Check AC components with Surge Test or comparable method Inspect air filters and clean or replace if necessary Inspect oil filters and clean or replace if necessary Grease Units if necessary Inspect brushes and replace if necessary Stone commutator Blowout Dynamometer Run auxiliary components and check trunion for ease of movement Run dynamometer at top rated speed Perform vibration analysis of dynamometer through its speed range on all three axes Reinstall all covers Clean up work area and remove lockouts The acquisition will be subject to Full and Open Competition under North American Industry Classification System (NAICS) code is 811310 - Commercial & Industrial Machinery and Equipment with a size standard of $7 million. Award will be made to the lowest priced technically acceptable offer. The solicitation will be posted on FedConnect.net approximately 15 days after the electronic posting of this synopsis on FedBizOpps and FedConnect. This office does not intend to mail hard copies of the solicitation. All responsible sources may submit a quote which shall be considered by the Agency. Point of Contact for this requirement is Gerold Young, Contract Specialist, at (513) 487-2660, or by email at young.gerold@epa.gov. Questions must be submitted in writing to Gerold Young via email. Telephone queries will not be honored.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/EPA/OAM/OH/RFQ-OH-14-00106/listing.html)
- Place of Performance
- Address: Assessment and Standards DivisionUS Environmental Protection AgencyNational Vehicle and Fuel Emissions2565 Plymouth RoadAnn ArborMI48105USA
- Zip Code: 48105
- Zip Code: 48105
- Record
- SN03376971-W 20140529/140527234736-9d6b740af6e1a573a36ba9c961c05846 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |