SOLICITATION NOTICE
53 -- Water Tank Rehab
- Notice Date
- 6/3/2014
- Notice Type
- Presolicitation
- NAICS
- 238990
— All Other Specialty Trade Contractors
- Contracting Office
- FWS, DIVISION OF CONTRACTING AND GEP.O. BOX 1306500 GOLD AVENUE SWALBUQUERQUENM87102-3118US
- ZIP Code
- 00000
- Solicitation Number
- F14PS00519
- Response Due
- 7/7/2014
- Archive Date
- 8/6/2014
- Point of Contact
- RAY A. FLETCHER
- E-Mail Address
-
ray_fletcher@fws.gov
(ray_fletcher@fws.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Description of Work: The work shall consist of labor, equipment, supplies, and materials to complete the following work items for the water tank (tower) and sand trap: (NOTE: These items of work for the water tank are based on the 2011 Tank Inspection prepared by Coating & Corrosion Specialists Inc.). The water tank is considered to a permitrequired confined space. Water Tank (Tower): 1. Only the interior of water tank to be sand blasted to an SSPC-SP-10 white blast cleaning standard resulting in surfaces to be free from rust scale, loose mill scale, dirt, and loose paint. 2. The coating system to be applied shall be a three (3) coat epoxy with the thickness to be no less than 15 mils DFT. 3. All bolts and washers to be replaced with stainless steel bolts and washers with two (2) washers per bolt. 4. Caulking shall be applied to all lapped joints and roof angle. 5. The manway which is located at the top of the water tank to be replaced with OSHA required size (diameter) including hand rails. 6. All waste materials generated to complete the project shall be the contractors responsibility to dispose per state and local regulations per Section 3.2 unless otherwise noted. 7. Provide locking/securing mechanisms to water tank cover. 8. Due to the location of work (within the tank interior); work is considered to be regulated under OSHA confined space regulations. 9. Interior paint has been tested for lead based paint and contains less than 100 ppm. Sand Trap: 1. Exterior and interior of sand trap to be sand blasted to an SSPC-SP-10 white blast cleaning standard resulting in surfaces to be free from rust scale.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/FWS/CGSWO/F14PS00519/listing.html)
- Record
- SN03384343-W 20140605/140603235449-fe7288742090ec79857b5ea0c8998914 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |