FBODaily.com | FedBizOpps: PRESOL | 51 | CVN-78 TOOLS

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 04, 2014 FBO #4605
SOLICITATION NOTICE

51 -- CVN-78 TOOLS

Notice Date: 7/2/2014
Notice Type: Presolicitation
Contracting Office: 4101 Washington Ave Bldg 2, Newport News, VA 23607
ZIP Code: 23607
Solicitation Number: N62793-14-R-A135A
Response Due: 7/11/2014
Archive Date: 1/7/2015
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Service-Disabled Veteran-Owned Small Business
Description: Quotes are being solicited under solicitation number N62793-14-R-A135A. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 626332_04. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified sellers may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-11 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be SUFFOLK, VA 23435 The NAVSEA SUPSHIP - Newport News requires the following items, Exact Match Only, to the following: LI 001: 13G974SCREWDRIVERScrewdriver,Keystone,1/4 x 24 In,Chrome NIIN 00-010-7915, 1, EA; LI 002: 10Z822PLIERS, SLIPTongue/Groove Pliers,Smooth,10 ln,Blue NIIN 00-059-6711, 3, EA; LI 003: 3R484HAMMER, HANDBall Pein Hammer,12 Oz NIIN 00-061-8542, 23, EA; LI 004: 1FX40?KEY SET,SOCKET HEAD SCREWHex Key Set,1.5 - 10mm,L-Shaped,Short NIIN 00-112-9599, 4, EA; LI 005: 4TDE9SOCKET,SOCKET WRENCHFlex Socket,3/8 In Dr,7/16 In,12 Pt,Std NIIN 00-142-5154, 2, EA; LI 006: 3R095SCREWDRIVER,OFFSETOffset Screwdriver,Phillips #1,#2 NIIN 00-180-0798, 3, EA; LI 007: 2AJK9 (SET)PUNCH,CUTTING,DOUBLE BOW, 1/2 SETArch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0923, 10, EA; LI 008: 2AJK9 (SET)PUNCH,CUTTING,DOUBLE BOW, 5/8 SETArch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0924, 10, EA; LI 009: 2AJK9 (SET)PUNCH,CUTTING,DOUBLE BOW, 3/4 SETArch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0925, 10, EA; LI 010: 2AJK9 (SET)PUNCH,CUTTING,DOUBLE BOW, 7/8 SETArch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0926, 10, EA; LI 011: 2AJK9 (SET)PUNCH,CUTTING,DOUBLE BOW, 1 in SETArch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0927, 10, EA; LI 012: 1Q740PUNCH,CUTTING,SINGLE BOWPunch,Drive Pin,1/8 In NIIN 00-180-0939, 6, EA; LI 013: 1Q738PUNCH,CUTTING,SINGLE BOWDrive Pin Punch,1/4 x 5 3/4 In NIIN 00-180-0943, 11, EA; LI 014: 1Q746PUNCH,CUTTING,SINGLE BOWDrive Pin Punch,5/16 x 6 3/8 In NIIN 00-180-0945, 11, EA; LI 015: 49L978FINGER,MECHANICALMechanical Fngr Rtrvr,Flxbl Jaw,23-1/2In NIIN 00-180-2951, 1, EA; LI 016: 24N405CHISEL,PARINGSocket Chisel,1 In. x 9 In. NIIN 00-186-8170, 1, EA; LI 017: 633048SWAGE,TOP,BLACKSMITH'S NIIN 00-188-1840, 1, EA; LI 018: 3R213PLIERS Duckbill Plier NIIN 00-188-3239, 3, EA; LI 019: 20X666DIE, RETHREADINGHex Rethreading Bolt Die,Steel,1/4-28 NIIN 00189-3120, 8, EA; LI 020: 1FX51CROWFOOT ATTACHMENT,SOCKET WRENCHCrowfoot Wrench,Flare,3/8Dr,11/16 In NIIN 00-189-7896, 4, EA; LI 021: 1AM79SOCKET,SOCKET WRENCHSocket,1/2 In Dr,1-1/8 In,12 Pt,Std NIIN 00189-7914, 3, EA; LI 022: 1AH07SOCKET,SOCKET WRENCHSocket,1/4 In Dr,5/16 In,6 Pt,Deep NIIN 00-189-7920, 3, EA; LI 023: 1AM63SOCKET,SOCKET WRENCHSocket,1/2 In Dr,7/16 In,12 Pt,Std NIIN 00-189-7924, 4, EA; LI 024: 1AM65SOCKET,SOCKET WRENCHSocket,1/2 In Dr,9/16 In,12 Pt,Std NIIN 00-189-7932, 4, EA; LI 025: 1AM75SOCKET,SOCKET WRENCHSocket,1/2 In Dr,15/16 In,12 Pt,Std NIIN 00189-7935, 1, EA; LI 026: 1AF76SOCKET,SOCKET WRENCHSocket,1/4 In Dr,1/2 In,12 Pt,Std NIIN 00-189-8610, 18, EA; LI 027: 1N684DRILL TWISTTaper Shank Drill,5/32,#1MT,Blk Oxide NIIN 00-189-9186, 5, EA; LI 028: 1F579DRILL TWISTJobber Bit,#5,High Speed Steel NIIN 00-189-9250, 1, EA; LI 029: 1F589DRILL TWISTJobber Bit,#10,High Speed Steel NIIN 00-189-9255, 1, EA; LI 030: 1F599DRILL TWISTJobber Bit,#15,High Speed Steel NIIN 00-189-9260, 1, EA; LI 031: 1F601DRILL TWISTJobber Bit,#16,High Speed Steel NIIN 00-189-9261, 1, EA; LI 032: 1F611DRILL TWISTJobber Bit,#21,High Speed Steel NIIN 00-189-9266, 1, EA; LI 033: 1F615DRILL TWISTJobber Bit,#23,High Speed Steel NIIN 00-189-9268, 1, EA; LI 034: 1F617DRILL TWISTJobber Bit,#24,High Speed Steel NIIN 00-189-9269, 1, EA; LI 035: 1F619DRILL TWISTJobber Bit,#25,High Speed Steel NIIN 00-189-9270, 1, EA; LI 036: 1F625DRILL TWISTJobber Bit,#28,High Speed Steel NIIN 00-189-9273, 1, EA; LI 037: 1F629DRILL TWISTJobber Bit,#30,High Speed Steel NIIN 00-189-9275, 1, EA; LI 038: 1F637DRILL TWISTJobber Bit,#34,High Speed Steel NIIN 00-189-9279, 1, EA; LI 039: 1F673DRILL TWISTJobber Bit,#52,High Speed Steel NIIN 00-189-9297, 1, EA; LI 040: 1F675DRILL TWISTJobber Bit,#53,High Speed Steel NIIN 00-189-9298, 1, EA; LI 041: 1F681DRILL TWISTJobber Bit,#56,High Speed Steel NIIN 00-189-9301, 1, EA; LI 042: 1F689DRILL TWISTJobber Bit,#60,High Speed Steel NIIN 00-189-9305, 1, EA; LI 043: 4HAP1DRILL TWISTTaper Shank Drill,19/64,#1MT,Black Oxide NIIN 00-189-9309, 5, EA; LI 044: 1N712DRILL TWISTTaper Shank Drill,11/32,#1MT,Blk Oxide NIIN 00-189-9312, 9, EA; LI 045: 1N716DRILL TWISTTaper Shank Drill,3/8,#1MT,Blk Oxide NIIN 00-189-9314, 9, EA; LI 046: 4HAP4DRILL TWISTTaper Shank Drill,25/64,#1MT,Black Oxide NIIN 00-189-9315, 5, EA; LI 047: 1N720DRILL TWISTTaper Shank Drill,13/32,#1MT,Blk Oxide NIIN 00-189-9316, 9, EA; LI 048: 4HAP5DRILL TWISTTaper Shank Drill,27/64,#1MT,Black Oxide NIIN 00-189-9317, 5, EA; LI 049: 1N725DRILL TWISTTaper Shank Drill,7/16,#1MT,Blk Oxide NIIN 00-189-9318, 9, EA; LI 050: 4HAP6DRILL TWISTTaper Shank Drill,29/64,#1MT,Black Oxide NIIN 00-189-9319, 3, EA; LI 051: 4HAR1DRILL TWISTTaper Shank Drill,37/64,#2MT,Black Oxide NIIN 00-189-9327, 5, EA; LI 052: 3R106PUNCH, CENTERCenter Punch,6 1/4 L x 19/32 In Hex NIIN 00-197-9490, 1, EA; LI 053: 20X671DIE, RETHREADINGHex Rethreading Bolt Die,Steel,7/16-14 NIIN 00-197-9553, 9, EA; LI 054: 20X675DIE, RETHREADINGHex Rethreading Bolt Die,Steel,9/16-12 NIIN 00-197-9555, 3, EA; LI 055: 20X679DIE, RETHREADING NIIN 00197-9557, 3, EA; LI 056: 20X681DIE, RETHREADINGHex Rethreading Bolt Die,Steel,7/8-9 NIIN 00-197-9558, 3, EA; LI 057: 20X678DIE, RETHREADINGHex Rethreading Bolt Die,Steel,5/8-18 NIIN 00-197-9567, 2, EA; LI 058: 20X682DIE, RETHREADINGHex Rethreading Bolt Die,Steel,7/8-14 NIIN 00-197-9569, 2, EA; LI 059: 20X684DIE, RETHREADING NIIN 00-197-9571, 2, EA; LI 060: 4RE22KEY,SOCKET HEAD SCREWHex Key,L,3/8 In,4-1/4 in. L,PK5 NIIN 00-198-5390, 20, EA; LI 061: 4RE24KEY,SOCKET HEAD SCREWHex Key,L,1/2 In,5-1/4 in. L NIIN 00-198-5391, 9, EA; LI 062: 4RE10KEY,SOCKET HEAD SCREWHex Key,L,3/64 In,1-43/64 in. L,PK10 NIIN 00-198-5401, 19, EA; LI 063: 4RE60KEY,SOCKET HEAD SCREWHex Key,L,3/8 In,6-3/4 in. L,PK5 NIIN 00-198-5406, 1, EA; LI 064: 4RE58KEY,SOCKET HEAD SCREWHex Key,L,5/16 In,6 in. L,PK5 NIIN 00-198-5409, 3, EA; LI 065: 4RE55KEY,SOCKET HEAD SCREWHex Key,L,3/16 In,4-1/2 in. L,PK10 NIIN 00-198-5410, 31, EA; LI 066: 4RE50KEY,SOCKET HEAD SCREWHex Key,L,3/32 In,3-3/8 in. L,PK10 NIIN 00-198-5413, 7, EA; LI 067: 6C956FILE, HANDFlat File,6 In,Smooth/Double,American NIIN 00-203-4552, 1, EA; LI 068: 5XKE9FILE, HANDKnife File, Smooth, American, 10 In NIIN 00-203-4554, 1, EA; LI 069: 6C951FILE, HANDMill File,10In,Sq Edge,Second/Single NIIN 00-203-4556, 2, EA; LI 070: 6A634FILE, HANDFlat File,12 In,Smooth/Double,American NIIN 00-203-4936, 1, EA; LI 071: 1G710FILE, HANDKnife File,8 In,Second,American NIIN 00-203-4948, 4, EA; LI 072: 6C954FILE, HANDFlat File,14 In Length NIIN 00-203-5486, 1, EA; LI 073: 1AKB3FILE, HANDHand File,10 In,0.375 In Sq,Bastard Cut NIIN 00-203-9774, 4, EA; LI 074: 1TTW9BRUSH, PAINTPaint Brush,#8,10-1/2in. NIIN 00-205-6511, 10, EA; LI 075: 3R296SHEARS, METALStraight Snips 8 In NIIN 00-221-1085, 3, EA; LI 076: 20X630DIESTOCKRound Die Stock NIIN 00-221-1236, 1, EA; LI 077: 3LY74NIPPERS, ENDEnd Cutting Nippers,7-1/2 In NIIN 00-221-1499, 2, EA; LI 078: 6R587AWL, SCRATCHScratch Awl,7 1/4 In L NIIN 00-221-1542, 17, EA; LI 079: 6NAY2GAGE, SURFACESurface Gage,3x2-9/16 In,5/16 Dia,9 In L NIIN 00-221-1842, 15, EA; LI 080: 4CEN5GAGE,DEPTH,RULERule Depth Gage,6 In,32nds/64ths NIIN 00-221-1902, 4, EA; LI 081: 6NAZ8GAGE,SCREW PITCHScrew Pitch Gage,27 Leaves,2.75-28 TPI NIIN 00-221-1992, 2, EA; LI 082: 1AM33HANDLE,SOCKET WRENCHHandle,Hinge,10 7/8 In NIIN 00-221-7958, 4, EA; LI 083: 1AF43HANDLE,SOCKET WRENCHHandle,Hinge,5 3/4 In NIIN 00-221-7960, 10, EA; LI 084: 1AF44HANDLE,SOCKET WRENCHHandle,T,4 1/2 In NIIN 00-221-7966, 3, EA; LI 085: 1C054WRENCH,RATCHETRatcheting Wrench,Square/Hex NIIN 00-221-7980, 4, EA; LI 086: 4RE50HANDLE,SOCKET WRENCHHex Key,L,3/32 In,3-3/8 in. L,PK10 NIIN 00-221-8036, 5, EA; LI 087: 3R144CHISEL, COLDCold Chisel,5/8 In. x 6-3/4 In. NIIN 00-221-8132, 5, EA; LI 088: 48Z983CHISEL,SIDE CUTTING,HANDSide Strike Chisel,1 In. x 10-3/4 In. NIIN 00-221-8133, 3, EA; LI 089: 4RE27KEY,SOCKET HEAD SCREWHex Key,L,3/4 In,7-1/4 in. L NIIN 00-222-1489, 3, EA; LI 090: 5c730GAGE,CENTERCenter Gage NIIN 00-222-4000, 1, EA; LI 091: 1Q740PUNCH, DRIVEPunch,Drive Pin,1/8 In NIIN 00-223-1014, 3, EA; LI 092: 3R012GAGE, THICKNESSFeeler Gauge Set,12 Blades,12 In NIIN 00-223-9194, 1, EA; LI 093: 5ln36TROWELBrick Trowel,London,11 In,Softgrip NIIN 00-223-9482, 4, EA; LI 094: 4VLV4EXTRACTOR,STUFFING BOX AND PUMP PACKINGPacking Extractor,Removable,7 1/2 In. L NIIN 00-223-9556, 8, EA; LI 095: 4VLV8EXTRACTOR,STUFFING BOX AND PUMP PACKINGPacking Extractor,Non-Removable,19 In. L NIIN 00-223-9559, 4, EA; LI 096: 5C735GAGE,SHEET AND PLATEGage,Wire,#0-36 Range NIIN 00-223-9572, 1, EA; LI 097: 3R549BAR, PINCHPry Bar,Aligning,24 In,23/32 In Flat End NIIN 00-224-1372, 13, EA; LI 098: 3R186PLIERS, SLIPThin Nose Plier NIIN 00-224-1567, 6, EA; LI 099: 4RE26KEY,SOCKET HEAD SCREWHex Key,L,5/8 In,6-1/4 in. L NIIN 00-224-2510, 3, EA; LI 100: 1AMH8WRENCH, BOXBox End Wrench,9/16 x 5/8 In,8-3/8 L NIIN 00-224-3140, 3, EA; LI 101: 1AMN8WRENCH, BOXBox End Wrench,3/4 X 7/8 in.,12-3/4 L NIIN 00-224-3142, 1, EA; LI 102: 1amn9WRENCH, BOXBox End Wrench,15/16 x 1 in.,14 in. L NIIN 00-224-3143, 5, EA; LI 103: 4a098HAMMER, HANDRiveting Hammer,16 Oz,Fiberglass NIIN 00-224-4113, 2, EA; LI 104: 3ny48HAMMER, HANDHammer,Claw,16 Oz NIIN 00-224-4121, 1, EA; LI 105: 4re20KEY,SOCKET HEAD SCREWHex Key,L,1/4 In,3-1/4 in. L,PK10 NIIN 00-224-4659, 10, EA; LI 106: 6C238SCREWDRIVERScrewdriver,Phillips,#1 x 3,Plastic NIIN 00-224-7370, 15, EA; LI 107: 3p281CUTTER, HOLEDrill/Countersink Bit,60 Deg,#2,HSS,BRGT NIIN 00-224-8624, 10, EA; LI 108: 2XUU6DRIFT, DRILLMorse Taper Drift Tool,#2, #3, #4 & #5 NIIN 00-224-8949, 2, EA; LI 109: 2XUU6DRIFT, DRILLMorse Taper Drift Tool,#2, #3, #4 & #6 NIIN 00-224-8950, 5, EA; LI 110: 4dc05WEDGE, JOINTFlange Wedge,Nonsparking,4 x 3/4 In NIIN 00-224-9485, 6, EA; LI 111: 1ak07SOCKET,SOCKET WRENCHSocket,3/8 In Dr,3/8 In,12 Pt,Std NIIN 00-227-6702, 5, EA; LI 112: 1ak13SOCKET,SOCKET WRENCHSocket,3/8 In Dr,3/4 In,12 Pt,Std NIIN 00-227-6705, 3, EA; LI 113: 5hm34SCREWDRIVER,FLAT TIPCabinet Screwdriver,3/16 x 6 In NIIN 00-227-7334, 3, EA; LI 114: 1af67ADAPTER,SOCKET WRENCHSocket Adapter,3/8 F x 1/4 In M NIIN 00-227-8095, 8, EA; LI 115: 1ah75EXTENSION,SOCKET WRENCHSocket Extension,3/8 x 6 In,Chrome NIIN 00-227-8107, 10, EA; LI 116: 1F545DRILL, TWISTJobber Bit,1/2 In.,High Speed Steel NIIN 00-227-9672, 1, EA; LI 117: 15J469TAP,THREAD CUTTINGHand Tap,#4-40UNC,Bright NIIN 00-228-1040, 2, EA; LI 118: 4HAT3DRILL, TWISTTaper Shank Drill,59/64,#3MT,Black Oxide NIIN 00-228-1322, 1, EA; LI 119: 1N777DRILL, TWISTTaper Shank Drill,5/8,#2MT,Blk Oxide NIIN 00-228-1331, 7, EA; LI 120: 1N799DRILL, TWISTTaper Shank Drill,11/16,#2MT,Blk Oxide NIIN 00-228-1334, 9, EA; LI 121: 1N807DRILL, TWISTTaper Shank Drill,3/4,#2MT,Blk Oxide NIIN 00-228-1335, 3, EA; LI 122: 4HAR7DRILL, TWISTTaper Shank Drill,49/64,#2MT,Black Oxide NIIN 00-228-1336, 3, EA; LI 123: 1N811DRILL, TWISTTaper Shank Drill,25/32,#2MT,Blk Oxide NIIN 00-228-1337, 5, EA; LI 124: 4HAR9DRILL, TWISTTaper Shank Drill,53/64,#3MT,Black Oxide NIIN 00-228-1340, 3, EA; LI 125: 1N823DRILL, TWISTTaper Shank Drill,7/8,#3MT,Blk Oxide NIIN 00-228-1343, 3, EA; LI 126: 4HAT2DRILL, TWISTTaper Shank Drill,57/64,#3MT,Black Oxide NIIN 00-228-1344, 3, EA; LI 127: 1N831DRILL, TWISTTaper Shank Drill,15/16,#3MT,Blk Oxide NIIN 00-228-1345, 3, EA; LI 128: 1N835DRILL, TWISTTaper Shank Drill,31/32,#3MT,Blk Oxide NIIN 00-228-1347, 5, EA; LI 129: 1N839DRILL, TWISTTaper Shank Drill,1 In,#3MT,Blk Oxide NIIN 00-228-1349, 3, EA; LI 130: 4HAT6DRILL, TWISTTaper Shank Drill,1 1/64,#3MT,Blk Oxide NIIN 00-228-1350, 3, EA; LI 131: 1N843DRILL, TWISTTaper Shank Drill,1 1/32,#3MT,Blk Oxide NIIN 00-228-1351, 3, EA; LI 132: 1N847DRILL, TWISTTaper Shank Drill,1 1/16,#3MT,Blk Oxide NIIN 00-228-1353, 4, EA; LI 133: 1N855DRILL, TWISTTaper Shank Drill,1 1/8,#4MT,Blk Oxide NIIN 00-228-1357, 4, EA; LI 134: 1N863DRILL, TWISTTaper Shank Drill,1 3/16,#4MT,Blk Oxide NIIN 00-228-1361, 5, EA; LI 135: 1AKW2WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,5/16In.,5-3/8In. OAL NIIN 00-228-9503, 9, EA; LI 136: 1AKW4WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,3/8In.,6In. OAL NIIN 00-228-9504, 11, EA; LI 137: 1AKW5WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,7/16In.,7In. OAL NIIN 00-228-9505, 9, EA; LI 138: 1AKW6WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,1/2In.,8In. OAL NIIN 00-228-9506, 9, EA; LI 139: 1AKW8WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,5/8In.,9-1/2In. OAL NIIN 00-228-9508, 9, EA; LI 140: 1AKW9WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,11/16In,10-1/4In OAL NIIN 00-228-9509, 4, EA; LI 141: 1AKX0WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,3/4In.,11In. OAL NIIN 00-228-9510, 6, EA; LI 142: 1AKX1WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,13/16In,11-3/8In OAL NIIN 00-228-9511, 6, EA; LI 143: 1AKX2WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,7/8In.,12-1/2In. OAL NIIN 00-228-9512, 7, EA; LI 144: 1AKX4WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,1In.,14In. OAL NIIN 00-228-9514, 3, EA; LI 145: 1AKX5WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,1-1/16In,15-1/4In OAL NIIN 00-228-9515, 7, EA; LI 146: 1AKX8WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,1-5/16In.,17In. OAL NIIN 00-228-9518, 8, EA; LI 147: 1ALC0WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,1-7/16In,18-1/2In OAL NIIN 00-228-9519, 1, EA; LI 148: 15J639TAP,THREAD CUTTINGHand Tap,#8-32UNC,Bright NIIN 00-232-1974, 2, EA; LI 149: 1AK06SOCKET,SOCKET WRENCHSocket,3/8 In Dr,5/16 In,12 Pt,Std NIIN 00-232-5711, 7, EA; LI 150: 6C962RASP, HANDHalf Round File,14 In,Second,Pipeliner NIIN 00-233-9713, 2, EA; LI 151: 10Z722RASP, HANDCabinet Rasp File,Second,Half Rnd,10 In NIIN 00-233-9717, 3, EA; LI 152: 3R139CHISEL,COLD,HANDCold Chisel,1/4 In. x 4-7/8 In. NIIN 00234-1927, 28, EA; LI 153: 4HAN9DRILL, TWISTTaper Shank Drill,17/64,#1MT,Black Oxide NIIN 00-234-5140, 5, EA; LI 154: 1G596FILE, HANDThree Square File,6 In,Smooth,American NIIN 00-234-6522, 6, EA; LI 155: 1G590FILE, HANDThree Square File,8 In,Smooth,American NIIN 00-234-6529, 2, EA; LI 156: 1AKA6FILE, HANDHand File,10 In,0.375 In Dia,Second Cut NIIN 00-234-6555, 2, EA; LI 157: 1AKA9FILE, HANDHand File,12 In,0.500 In Dia,Smooth Cut NIIN 00-234-6559, 1, EA; LI 158: 1G736FILE, HANDHalf Round File,10 In,Second,American NIIN 00-234-6570, 4, EA; LI 159: 1AK14 SOCKET,SOCKET WRENCHSocket,3/8 In Dr,13/16 In,12 Pt,Std NIIN 00-235-5807, 4, EA; LI 160: 1AF75 SOCKET,SOCKET WRENCHSocket,1/4 In Dr,7/16 In,12 Pt,Std NIIN 00-235-5869, 16, EA; LI 161: 1AK36 SOCKET,SOCKET WRENCHSocket,3/8 In Dr,3/4 In,12 Pt,Deep NIIN -00235-5879, 3, EA; LI 162: 1AF70 SOCKET,SOCKET WRENCHSocket,1/4 In Dr,1/4 In,12 Pt,Std NIIN 00-236-2264, 19, EA; LI 163: 3r146CHISEL, COLD HANDCold Chisel,7/8 In. x 8 In NIIN 00-236-3273, 15, EA; LI 164: 2mrd2HAMMER, HANDBrick Hammer,16 Oz,Wood Handle NIIN 00-236-3730, 6, EA; LI 165: 4TDF2 SOCKET,SOCKET WRENCHFlex Socket,3/8 In Dr,9/16 In,12 Pt,Std NIIN 00-237-0978, 2, EA; LI 166: 4TDF4 SOCKET,SOCKET WRENCHFlex Socket,3/8 In Dr,11/16 In,12 Pt,Std NIIN 00-237-0979, 2, EA; LI 167: 4TDF5 SOCKET,SOCKET WRENCHFlex Socket,3/8 In Dr,3/4 In,12 Pt,Std NIIN 00-237-0980, 2, EA; LI 168: 10T712DIE,THREAD CUTTINGHSS Rd Adj Thread Die,13/16In,3,48 Pitch NIIN 00-239-2774, 1, EA; LI 169: 10T714DIE,THREAD CUTTINGHSS Rd Adj Thread Die,13/16In,4,40 Pitch NIIN 00-239-2775, 1, EA; LI 170: 20X632DIE,THREAD CUTTINGRd Adjustable Die,Steel,5-40 NIIN 00-239-2776, 1, EA; LI 171: 20X633DIE,THREAD CUTTINGRd Adjustable Die,Steel,6-32 NIIN 00-239-2777, 1, EA; LI 172: 20X635DIE,THREAD CUTTINGRd Adjustable Die,Steel,8-32 NIIN 00-239-2778, 1, EA; LI 173: 20X701DIE,THREAD CUTTINGRd Adjustable Die,HSS,#12-24 NIIN 00-239-2780, 1, EA; LI 174: 20K388HANDLE,SOCKET WRENCHSpeeder Handle,3/8 Dr x 16-3/4 In,Chrome NIIN 00-237-4969, 8, EA; LI 175: 4a848SCREWDRIVER,CROSS TIPScrewdriver,Phillips,#2 x 4,Cushion NIIN 00-237-8173, 5, EA; LI 176: 5ll56SCREWDRIVER,CROSS TIPScrewdriver,Phillips,#2 x 7 NIIN 00-237-8174, 8, EA; LI 177: 20X670DIE,RETHREADINGHex Rethreading Bolt Die,Steel,3/8,24 NIIN 00-237-8272, 8, EA; LI 178: 20X672DIE,RETHREADINGHex Rethreading Bolt Die,Steel,7/16-20 NIIN 00-237-8273, 8, EA; LI 179: 20X674DIE,RETHREADINGHex Rethreading Bolt Die,Steel,1/2-20 NIIN 00-237-8274, 8, EA; LI 180: 5NAF8SCRAPER,BEARINGMachinists Scraper,4 In,Hollow Ground NIIN 00-237-8702, 8, EA; LI 181: 13H073FLE, HANDSquare File,American,Bastard,12 In NIIN 00-238-9664, 4, EA; LI 182: 13H075FLE, HANDSquare File,American,Smooth,12 In NIIN 00-238-9666, 4, EA; LI 183: 1AF99SOCKET,SOCKET WRENCHSocket,1/4 In Dr,7/16 In,6 Pt,Std NIIN 00-239-0016, 3, EA; LI 184: 1Q802DRIFTPINBrass Drift Punch NIIN 00-239-0037, 4, EA; LI 185: 2MPX8SEAL STRAPPINGStrapping Seal,3/4In,Snap-On Grit,PK1000 NIIN 00-239-5293, 2, EA; LI 186: 5ZV47SEAL STRAPPINGStrapping Seal,1-1/4 In.,Push,PK700 NIIN 00-239-5294, 2, EA; LI 187: 5XJT7FILE, HANDPillar File,Swiss,6 In,2 Cut NIIN 00-239-7626, 4, EA; LI 188: 5ZV47DIE,RETHREADINGStrapping Seal,1-1/4 In.,Push,PK700 NIIN 00-239-8240, 8, EA; LI 189: 2WDR2HAMMER-BRUSH,WELDER'SChipping Hammer w/Brush,Vertical,4.4 Oz NIIN 00-240-3096, 2, EA; LI 190: 1u228EXTRACTOR,SCREWExtractor,Screw,#7 NIIN 00-240-5217, 3, EA; LI 191: 1u226EXTRACTOR,SCREWExtractor,Screw,#6 NIIN 00-240-5220, 3, EA; LI 192: 1u220EXTRACTOR,SCREWExtractor,Screw,#3 NIIN 00-240-5221, 4, EA; LI 193: 1u216EXTRACTOR,SCREWExtractor,Screw,#1 NIIN 00-240-5223, 4, EA; LI 194: 3R100SCREWDRIVER,OFFSETOffset Screwdriver,Slotted,3/8x6 1/8 In NIIN 00-240-5232, 16, EA; LI 195: 4RE25KEY,SOCKET HEAD SCREWHex Key,L,9/16 In,5-3/4 in. L NIIN 00-240-5268, 6, EA; LI 196: 4RE21KEY,SOCKET HEAD SCREWHex Key,L,5/16 In,3-3/4 in. L,PK5 NIIN 00-240-5274, 12, EA; LI 197: 3R357WRENCH,ADJUSTABLEAdjustable Wrench,4 in.,Chrome,Plain NIIN 00-240-5330, 4, EA; LI 198: 6ATY6WRENCH,ADJUSTABLESpud Pipe Wrench,Cast Iron,12 in. NIIN 00-240-5336, 34, EA; LI 199: 1ANK1WRENCH,OPEN ENDOpen End Wrench,3/4 X 7/8,15 Deg,9-1/2L NIIN 00-240-5609, 2, EA; LI 200: 6DPV6BAR, CHISELPinch Chisel Pry Bar,24 In NIIN 00-240-6031, 3, EA; LI 201: 6DKE4BAR, PINCHPinch Point Bar,14 In NIIN 00-240-6051, 4, EA; LI 202: 1Q742?PUNCH,DRIVE PINDrive Pin Punch,1/16 x 4 1/8 In NIIN 00-240-6082, 4, EA; LI 203: 1Q738?PUNCH,DRIVE PINDrive Pin Punch,1/4 x 5 3/4 In NIIN 00-240-6083, 4, EA; LI 204: 15X785KNIFE,CRAFTSMAN'SFolding Knife,Hawk Bill,4 In,Brown/Rose NIIN 00-240-7070, 8, EA; LI 205: 1AH99ADAPTER,SOCKET WRENCHSocket Adapter,1/2 F x 3/8 In M NIIN 00-240-8702, 5, EA; LI 206: 1AH97ADAPTER,SOCKET WRENCHSocket Adapter,3/8 F x 1/2 In M NIIN 00-240-8703, 8, EA; LI 207: 3R158PUNCH,ALIGNINGPunch,Drift,5/16 In NIIN 00-240-8894, 2, EA; LI 208: 3R156PUNCH,ALIGNINGPunch,Drift,7/32 In NIIN 00-240-8896, 2, EA; LI 209: 3R154PUNCH,ALIGNINGPunch,Drift,1/8 In NIIN 00-240-8898, 1, EA; LI 210: 1AM37HANDLE,SOCKET WRENCHHandle,T,13 In NIIN 00-241-3142, 3, EA; LI 211: 4RE56KEY,SOCKET HEAD SCREWHex Key,L,7/32 In,4-7/8 in. L,PK10 NIIN 00-241-3179, 3, EA; LI 212: 4RE57KEY,SOCKET HEAD SCREWHex Key,L,1/4 In,5-1/4 in. L,PK10 NIIN 00-241-3180, 3, EA; LI 213: 4RE57KEY,SOCKET HEAD SCREWHex Key,L,1/4 In,5-1/4 in. L,PK10 1AF98SOCKET,SOCKET WRENCHSocket,1/4 In Dr,3/8 In,6 Pt,Std NIIN 00-241-3186, 19, EA; LI 214: 4JA36NUTDRIVERNut Driver,Hollow,Magnetic,1/4 In,3 In NIIN 00-241-3188, 18, EA; LI 215: 1g600FILE, HANDThree Square File,6 In,Bastard/Double NIIN 00-241-7675, 4, EA; LI 216: 6a628FILE, HANDMill File,8 In,Smooth/Single,American NIIN 00-241-9135, 6, EA; LI 217: 6a626FILE, HANDHalf Round File,6 In,Bastard,American NIIN 00-9147, 6, EA; LI 218: 2a499FILE, HANDHalf Round File,8 In,Bastard,American NIIN 00-241-9150, 4, EA; LI 219: 1g738FILE, HANDHalf Round File,8 In,Second,American NIIN 00-241-9151, 2, EA; LI 220: 1G732FILE, HANDHalf Round File,12 In,Smooth,American NIIN 00-241-9156, 4, EA; LI 221: 13H035FILE, HANDMill File,American,Smooth,Rect,14 In NIIN 00-241-9166, 4, EA; LI 222: 3R157PUNCH, ALIGNINGPunch,Drift,1/4 In NIIN 00-242-0763, 2, EA; LI 223: 1AF55HANDLE,SOCKET WRENCHDriver,Socket,6 3/4 In NIIN 00-242-3256, 16, EA; LI 224: 1AK15SOCKET,SOCKET WRENCHSocket,3/8 In Dr,7/8 In,12 Pt,Std NIINJ 00-242-3330, 8, EA; LI 225: 6RCC0SOCKET,SOCKET WRENCHSocket,1/4 In Dr,9/32 In,12 Pt,Std NIIN 00-242-3345, 19, EA; LI 226: 1AN15SOCKET,SOCKET WRENCHSocket,1/2 In Dr,3/4 In,12 Pt,Deep NIIN 00-242-3349, 3, EA; LI 227: 6RCC1SOCKET,SOCKET WRENCHSocket,1/4 In Dr,11/32 In,12 Pt,Std NIIN 00-242-3351, 16, EA; LI 228: 1Q745PUNCH, DRIVEDrive Pin Punch,3/32 x 4 1/2 In NIIN 00-242-3435, 1, EA; LI 229: 6GRT4HAMMER, HANDBlacksmith Hammer,3 Lb,15 In,Hickory NIIN 00-242-3915, 4, EA; LI 230: 4RE13KEY,SOCKET HEAD SCREWHex Key,L,3/32 In,2 in. L,PK10 NIIN 00-242-7410, 28, EA; LI 231: 4RE19KEY,SOCKET HEAD SCREW NIIN 00-242-7411, 9, EA; LI 232: 1AH74EXTENSION,SOCKET WRENCHSocket Extension,3/8 x 3 In,Chrome NIIN 00-243-1689, 3, EA; LI 233: 1AH77EXTENSION,SOCKET WRENCHSocket Extension,3/8 x 12 In,Chrome NIIN 00-243-1691, 6, EA; LI 234: 1AM39EXTENSION,SOCKET WRENCHSocket Extension,1/2 x 2-1/2 In,Chrome NIIN 00-243-1697, 2, EA; LI 235: 3ZUN5COUNTERSINKCountersink,6 Fl,82 Deg,3/8,Cobalt NIIN 00-243-2308, 1, EA; LI 236: 2ZUW3RULE,MACHINIST'SSteel Rule,Spring Tempered,18 In,4R Grad NIIN 00-243-3367, 3, EA; LI 237: 1AM40EXTENSION,SOCKET WRENCHSocket Extension,1/2 x 5 In,Chrome NIIN 00-243-7326, 10, EA; LI 238: 1AH90SCREWDRIVERSocket Bit,3/8 Dr,1/4 In,Slotted NIIN 00-243-7337, 10, EA; LI 239: 1AN19SOCKET,SOCKET WRENCHSocket,1/2 In Dr,1 In,12 Pt,Deep NIIN 00-243-7340, 4, EA; LI 240: 1AN20SOCKET,SOCKET WRENCHSocket,1/2 In Dr,1-1/16 In,12 Pt,Deep NIIN 00-243-7341, 4, EA; LI 241: 1AN11SOCKET,SOCKET WRENCHSocket,1/2 In Dr,1/2 In,12 Pt,Deep NIIN 00-243-7351, 3, EA; LI 242: 3UW33BRUSH, PAINTPaint Brush,1in.,8-3/4in. NIIN 00-245-4509, 20, EA; LI 243: 2zve1GAGE, THICJNESSThickness Gage,13 Straight Leaves NIIN 00-246-2303, 1, EA; LI 244: 2AJR1BRUST, ARTISTArtist Brush,Water Colors,1/8in.,7-1/2in NIIN 00-246-8503, 4, EA; LI 245: 2AJR2BRUST, ARTISTArtist Brush,Water Colors,1/4in.,7-1/2in NIIN 00-246-8505, 4, EA; LI 246: 3G965TWEEZERS,CRAFTSMAN'STweezer,4.25 In L,Sharp,Narrow NIIN 00-247-0867, 2, EA; LI 247: 20K386HANDLE,SOCKET WRENCHSpeeder Handle,1/2 Dr x 21 In,Chrome NIIN 00-249-1071, 5, EA; LI 248: 5XJY1FILE, HANDFlat File,Bastard,American,8 In NIIN 00-249-2848, 2, EA; LI 249: 6A627FILE, HANDHalf Round File,12 In,Bastard,American NIIN 00-252-4015, 10, EA; LI 250: 6NRD1GAGE, FILLETRadius Gage Set,1/32 to 1/4,30 Leaves NIIN 00-273-9867, 9, EA; LI 251: 4ahp7TAP,THREAD CUTTINGHand Tap,5/16-18UNC,Uncoated NIIN 00-276-1031, 2, EA; LI 252: 4aht5TAP,THREAD CUTTINGHand Tap,3/8-16UNC,Uncoated NIIN 00-276-1032, 1, EA; LI 253: 1ANP6RATCHET ATTACHMENT,SOCKET WRENCHIgnition Wrench,7/32 x 1/4 in.,15/60 Deg NIIN 00-277-1207, 2, EA; LI 254: 1ez16WRENCH,PIPEOffset Pipe Wrench,Aluminum,24 in. L NIIN 00-277-1462, 1, EA; LI 255: 5LL66NUTDRIVERNut Driver,7/16 In,3 In Shank,Cushion NIIN 00-277-1801, 10, EA; LI 256: 3R932NUTDRIVERNut Driver 9/32 In NIIN 00-277-1802, 14, EA; LI 257: 1ANF8WRENCH, OPENOpen End Wrench,3/16x1/4,15 Deg,3-7/8 L NIIN 00-277-2311, 2, EA; LI 258: 1ANH1WRENCH, OPENOpen End Wrench,3/8x7/16,15 Deg,5-3/4 L NIIN 00-277-2342, 19, EA; LI 259: 1AK35SOCKET,SOCKET WRENCHSocket,3/8 In Dr,11/16 In,12 Pt,Deep NIIN 00-277-4252, 3, EA; LI 260: 2R536BLADE,HAND HACKSAWHs Hacksaw Blade Pk10 NIIN 00-277-4587, 32, EA; LI 261: 5R850BLADE,HAND HACKSAWHacksaw Blade,10 In,24 TPI,Bi-metal NIIN 00-277-4588, 14, EA; LI 262: 24C980BLADE,HAND HACKSAWHack Saw Blade,Bi-Metal,10x1/2 In,32 TPI NIIN 00-277-4589, 25, EA; LI 263: 5R854BLADE,HAND HACKSAWHacksaw Blade,12 In,32 TPI,Bi-metal NIIN 00-277-4592, 43, EA; LI 264: 1ANH8WRENCH, OPENOpen End Wrench,5/8x11/16,15 Deg,8-1/4 L NIIN 00-277-8301, 3, EA; LI 265: 18DU58CASE,TWIST DRILLDrill Bit Case,Jobber Length,Steel NIIN 00-277-8836, 14, EA; LI 266: 3R219PLIERS, SLIPAngle Nose Plier,5 1/4 In NIIN 00-278-0350, 12, EA; LI 267: 3R236PLIERS, SLIPPlier,Tongue/Groove NIIN 00-278-0351, 11, EA; LI 268: 6C231BEVEL,SLIDING TSliding T Bevel NIIN 00-278-0645, 2, EA; LI 269: 6CMD2SCREWDRIVER,FLAT TIPSlotted Screwdriver,7/32 x 12 In NIIN 00-278-1268, 2, EA; LI 270: 3EJU2SCREWDRIVER,FLAT TIPSlotted Screwdriver,SS,9/64 In Tip NIIN 00-278-1269, 18, EA; LI 271: 6C260SCREWDRIVER,FLAT TIPScrewdriver,Slotted,3/8x12 In NIIN 00-278-1276, 25, EA; LI 272: 3XG68STRAPPINGSteel Strapping,17 mil,2910 ft. L NIIN 00-286-8565, 2, EA; LI 273: 36A163WRENCH, BOXDouble Box End Wrench,12 Pt,7/16 x1/2 In NIIN 00-287-4527, 2, EA; LI 274: 1APC4WRENCH, SPANAdjustable Hook Spanner Wrench,11/32x1/8 NIIN 00-288-6468, 4, EA; LI 275: 23Z407 EXTRACTOR,LAMP Lamp Extractor,Plastic,1/2 x 4 In NIIN 00-288-7679, 16, EA; LI 276: 6C270SCREWDRIVER,FLAT TIPScrewdriver,Slotted,1/4x1 1/2 In,Plastic NIIN 00-288-7803, 4, EA; LI 277: 1AK05SOCKET,SOCKET WRENCHSocket,3/8 In Dr,1/4 In,12 Pt,Std NIIN 00-288-8155, 3, EA; LI 278: 1ED82PUNCH AND DIE,KNOCKOUTPunch,Knockout,1/2in NIIN 00-288-8737, 2, EA; LI 279: 1AMN3WRENCH, BOXBox End Wrench,5/8 x 3/4 in.,6-1/8 in. L NIIN 00-288-9302, 1, EA; LI 280: 3R095SCREWDRIVER,OFFSETOffset Screwdriver,Phillips #1,#2 NIIN 00-288-9710, 27, EA; LI 281: 1UDU3WRENCH,BOX AND OPEN END,COMBINATIONCombination Wrench,1/4In.,3-17/64In. OAL NIIN 00-288-9997, 6, EA; LI 282: 3w639DIE SET,METAL STAMPING,HANDNumber Set,1/4 In. H,Steel NIIN 00-289-0002, 3, EA; LI 283: 3w639DIE SET,METAL STAMPING,HANDNumber Set,1/4 In. H,Steel NIIN 00-289-0003, 3, EA; LI 284: 3w639DIE SET,METAL STAMPING,HANDNumber Set,1/4 In. H,Steel NIIN 00-289-0004, 2, EA; LI 285: 5C629PLIERS,RETAINING RINGRetaining Ring Plier,0.115 In,External NIIN 00-293-0047, 1, EA; LI 286: 5ZL59JACK, HYDRAULICPump/Standard Cylinder Set,10 Ton Cap NIIN 00-293-0078, 2, EA; LI 287: 4RE48KEY,SOCKET HEAD SCREWHex Key,L,5/64 In,3-13/64 in. L,PK10 NIIN 00-293-0080, 5, EA; LI 288: 1AP52SOCKET,SOCKET WRENCHSocket,3/4 In Dr,1-1/2 In,12 Pt,Std NIIN 00-293-0094, 2, EA; LI 289: 4A736PUNCH AND DIE,KNOCKOUTPunch,Knockout,Round,7/8 In NIIN 00-293-0107, 2, EA; LI 290: 1AH93SCREWDRIVER ATTACHMENT,SOCKET WRENCHSocket Bit,3/8 Dr,#2,#2 Phillips NIIN 00-293-0318, 14, EA; LI 291: 3R155PUNCH,ALIGNINGPunch,Drift,3/16 In NIIN 00-293-0448, 6, EA; LI 292: 4ahp8TAP,THREAD CUTTINGHand Tap,5/16-18UNC,Uncoated NIIN 00-293-0712, 2, EA; LI 293: 1cll3NUTDRIVERNut Driver,Hex 11/32 In,Green,Steel NIIN -00-293-0796, 8, EA; LI 294: 1Q743PUNCH,STARTERDrive Pin Punch,3/16 x 5 1/4 In NIIN 00-293-1408, 2, EA; LI 295: 4RE47KEY,SOCKET HEAD SCREWHex Key,L,1/16 In,3 in. L,PK10 NIIN 00-293-1476, 5, EA; LI 296: 6R303BAR, WRECKINGRipping Bar 5/8 X 17 In NIIN 00-293-2384, 4, EA; LI 297: 6d054FACE,HAMMER,INSERTEDHammer Tip,1 In Dia,Tough,Green NIIN 00-293-2999, 13, EA; LI 298: 6d053FACE,HAMMER,INSERTEDHammer Tip,1 In Dia,Medium,Red NIIN 00-293-3007, 20, EA; LI 299: 6C261SCREWDRIVER,FLAT TIPScrewdriver,Slotted,1/4x6 In NIIN 00-293-3171, 4, EA; LI 300: 6C256SCREWDRIVER,FLAT TIPScrewdriver,Slotted,1/4x4 In,Plastic NIIN 00-293-3183, 4, EA; LI 301: 5C553?MALLET,RAWHIDERawhide Mallet,Hardwood,6 Oz NIIN0-00-293-3398, 1, EA; LI 302: 3R101PUNCH, CENTERCenter Punch,4-3/4 L x 1/4 In Hex NIIN 00-293-3509, 1, EA; LI 303: 2R480PUNCH, CENTERCenter Punch 1/4 In NIIN 00-293-3510, 4, EA; LI 304: 3R102PUNCH, CENTERCenter Punch,4 5/8 L x 5/16 In Hex NIIN 00-293-3512, 2, EA; LI 305: 3R950NUTDRIVERNut Driver 9/16 In NIIN 00-294-9514, 2, EA; LI 306: 2DGN8KEY SET,SOCKET HEAD SCREWHex Key Set,0.050 - 5/32 In.,Fold-Up NIIN 00-439-8988, 1, EA; LI 307: 2ZUC3BALL ATTACHMENT,MICMicrometer Ball Attachment,0.250 In Dia NIIN 00-494-1739, 1, EA; LI 308: 4EAC1CLAMP, PLIERLocking Plier,Straight,7 In NIIN 00-494-1895, 1, EA; LI 309: 3MD30FILE, THREADThread Restoring File,X-Fine/X-Course NIIN 00-516-3812, 9, EA; LI 310: 2R639GAGE, THICKNESSGo-No-Go Feeler Gauge,22 Blades NIIN 00-517-8096, 10, EA; LI 311: 3ZG91 PUNCH,CUTTING,DOUBLE BOW NIIN 00-541-7697, 8, EA; LI 312: 1AM21HANDLE,SOCKET WRENCHQuick Release Ratchet,1/2 In Dr,16 In L NIIN 00-541-8444, 2, EA; LI 313: 6C243SCREWDRIVER,CROSS TIPScrewdriver,Phillips,#2 x 10,Plastic NIIN 00-542-3438, 7, EA; LI 314: 4a856STRIPPER,WIRE,HANDWire Stripper/Cutter,6 In,22-30AWG NIIN 00-542-4487, 1, EA; LI 315: 5ME50PULLER,NAIL,HANDNail Puller,12 In L NIIN 00-542-4828, 1, EA; LI 316: 1V717DRILL SET,TWISTJobber Drill Set,20 PC,Wire,HSS,118 Deg NIIN 00-555-1528, 10, EA; LI317: 1AP34SCREWDRIVER ATTACHMENT,SOCKET WRENCHSocket Extension,3/4 x 4 In,Chrome NIIN 00-555-2353, 1, EA; LI 318: 3WCR1TWEEZERS,CRAFTSMAN'SIndustrial Tweezers,Sharp Point,4 1/2 In NIIN 00-565-3000, 2, EA; LI 319: 1u218EXTRACTOR,SCREWExtractor,Screw,#2 NIIN 00-580-2359, 4, EA; LI 320: 4ahm3TAP,THREAD CUTTINGHand Tap,#6-32UNC,Uncoated NIIN 00-580-7316, 2, EA; LI 321: 4ahw2TAP,THREAD CUTTINGHand Tap,7/16-14UNC,Uncoated NIIN 00-580-7335, 2, EA; LI 322: 4ahw4TAP,THREAD CUTTINGHand Tap,7/16-14UNC,Uncoated NIIN 00-580-7353, 1, EA; LI 323: 4a099HAMMER,HANDHammer,Hickory Handle NIIN 00-585-2383, 1, EA; LI 324: 4ahn1TAP,THREAD CUTTINGHand Tap,#10-24UNC,Uncoated NIIN 00-585-6760, 2, EA; LI 325: 13H905 KNIFE, CRAFTSMANPrecision Knife Set,Blk/Ylw,22 Pc NIIN 00-595-8400, 10, EA; LI 326: 1yug2SCREWDRIVER,CROSS TIPInsulated Phillips Screwdriver,#1 NIIN 00-596-0863, 2, EA; LI 327: 4cz91SCREWDRIVER,CROSS TIPScrewdriver,Phillips,Nonsparking#3x6 NIIN 00-596-0865, 2, EA; LI 328: 5HM40SCREWDRIVER,CROSS TIPScrewdriver,#2 Phillips x 1 1/2 In NIIN 00-596-0866, 5, EA; LI 329: 1AL71SCREWDRIVER ATTACHMENT,SOCKET WRENCHSocket Bit,3/8 Dr,3/8 In,Hex NIIN 00-596-1199, 1, EA; LI 330: 3R940NUTDRIVERNut Driver 3/8 In NIIN 00-596-1263, 18, EA; LI 331: 1AL67SCREWDRIVER ATTACHMENT,SOCKET WRENCHSocket Bit,3/8 Dr,7/32 In,Hex NIIN 00-596-8511, 1, EA; LI 332: 2RDW8SCREWDRIVER,FLAT TIPSlotted Screwdriver,1/4 In Tip,3 3/4 L NIIN 00-596-9364, 2, EA; LI 333: 23Z277CHISEL,FIRMERHigh Impact Hand Chisel,1/2 x 3-5/8 In NIIN 00-640-5421, 4, EA; LI 334: 1AL65SCREWDRIVER ATTACHMENT,SOCKET WRENCHSocket Bit,3/8 Dr,3/16 In,Hex NIIN 00-683-8597, 1, EA; LI 335: 1AL70SCREWDRIVER ATTACHMENT,SOCKET WRENCHSocket Bit,3/8 Dr,5/16 In,Hex NIIN 00-683-8602, 1, EA; LI 336: 4hf61TAP,THREAD CUTTINGHand Tap,#3-48UNC,Uncoated NIIN 00-729-5687, 2, EA; LI 337: 4ahl5TAP,THREAD CUTTINGHand Tap,#4-40UNC,Uncoated NIIN 00-729-5689, 2, EA; LI 338: 4ahn8TAP,THREAD CUTTINGHand Tap,1/4-20UNC,Uncoated NIIN 00-729-5693, 2, EA; LI 339: 4ahm6TAP,THREAD CUTTINGHand Tap,#8-32UNC,Uncoated NIIN 00-729-5694, 2, EA; LI 340: 4ahm2TAP,THREAD CUTTINGHand Tap,#6-32UNC,Uncoated NIIN 00-729-5695, 2, EA; LI 341: 3R244PLIERS,SLIP JOINTPlier,Tongue/Groove NIIN 00-781-0819, 3, EA; LI 342: 2ZPF6GAGE,THICKNESSFeeler Gauge,32 Blade,0.0015 to 0.035 In NIIN 00-804-2660, 1, EA; LI 343: 6R155SQUARE,CARPENTER'SCarpenters Square,Alum,24 x 16 In NIIN 00-810-3490, 13, EA; LI 344: 6C237SCREWDRIVER,CROSS TIPScrewdriver,Phillips,#0 x 2 3/4,Plastic NIIN 00-820-2995, 3, EA; LI 345: 4ahm1TAP,THREAD CUTTINGHand Tap,#6-32UNC,Uncoated NIIN 00-821-1027, 2, EA; LI 346: 4gp98TAP,THREAD CUTTINGHand Tap,#12-24UNC,Uncoated NIIN 00-821-1030, 2, EA; LI 347: 4ahm5TAP,THREAD CUTTINGHand Tap,#8-32UNC,Uncoated NIIN 00-825-0332, 2, EA; LI 348: 6R271HAMMER, HANDBall Pein Hammer,Hickory,40 Oz NIIN 00-900-6111, 2, EA; LI 349: 4R447HOLDER,INSERTED HAMMER FACESoft Face Hammer W/O Tip,1.85Lb,2 1/2 In NIIN 00-903-8556, 2, EA; LI 350: 4R443HOLDER,INSERTED HAMMER FACESoft Face Hammer W/O Tip,1.05 Lb,2 In NIIN 00-903-9310, 2, EA; LI 351: 2cyx8IGNITER,FRICTIONSingle Flint Lighter,w/ 5 Flint Renewals NIIN 00-965-0326, 9, EA; LI 352: 2cyx8FLINT TIP,FRICTION IGNITERSingle Flint Lighter,w/ 5 Flint Renewals NIIN 00-965-0603, 1, EA; LI 353: 4EAA7WRENCH,PLIERLocking Plier,Straight,10 In NIIN 00-965-0604, 1, EA; LI 354: 4RE53KEY,SOCKET HEAD SCREWHex Key,L,9/64 In,4 in. L,PK10 NIIN 00-984-0247, 3, EA; LI 355: 4CHV6WRENCH, PLIERLocking Plier,Straight,10 In NIIN 01-176-6931, 3, EA; LI 356: 3XA70ETCHER, ELECTRICEngraver,Electric NIIN 01-336-5533, 1, EA; LI 357: 2DGN4WRENCH, RATCHETRatcheting Wrench,3/16-3/8 in. sq. NIIN 01-419-4365, 1, EA; LI 358: 40L721CALIPER, OUTSIDEOutside Spring Caliper,Range 4 In. NIIN 01-434-9758, 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAVSEA SUPSHIP - Newport News intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAVSEA SUPSHIP - Newport News is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time quotes.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments are permitted unless specifically authorized at the time of award. Sellers must comply with the applicable FAR Clauses listed: 52.204-99, 52.212-3 Offeror Representations and Certifications ? commercial Items, 52.213-4 Full Text, 52.222-3, 52.232-33, 52.232.99, 52.246-16, 252.246-7000, 52.212-4, 52.212-5, 252.232-7003, 52.225-1. For labor only, NOT materials, the following FAR Clauses apply: 52.222-21, 52.222-26, 52.225-12, 52.233-3. For credit card 52.232-36, for purchases over 25,000, 52.204-10. https://www.acquisition.gov/far/
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N62793/N62793-14-R-A135A/listing.html)
Place of Performance: Address: SUFFOLK, VA 23435; Zip Code: 23435
Record: SN03414069-W 20140704/140703003950-3ca553f1996a7aa35ac630206dbcba8a (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

51 -- CVN-78 TOOLS