SOLICITATION NOTICE
15 -- Bell Crank (Please refer to the Description/Synopsis and/or Place of Performance for POC on this effort)
- Notice Date
- 7/9/2014
- Notice Type
- Presolicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- ACC-RSA - (Aviation), ATTN: CCAM, Building 5303, Martin Road, Redstone Arsenal, AL 35898-5280
- ZIP Code
- 35898-5280
- Solicitation Number
- W58RGZ-14-R-0284
- Response Due
- 7/24/2014
- Archive Date
- 9/7/2014
- Point of Contact
- Amy Greer, 256-955-7012
- E-Mail Address
-
ACC-RSA - (Aviation)
(amy.greer@us.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- ****ATTENTION****ALL FORMAL COMMUNICATION RELATED TO THIS ACQUISITION MUST BE DIRECTED TO: Joan McFarlen, Contract Specialist, email: joan.r.mcfarlen.civ@mail.mil. No telephone calls will be accepted. PRON: AX4F0465AX; NOUN: Bell Crank; NSN: 1560-01-158-9685; P/N: 70400-08102-045; minimum qty of 200 each and maximum qty of 600 each on a 5 year Indefinite Delivery Indefinite Quantity (IDIQ) type contract with deliveries to New Cumberland, PA. This is a Critical Safety Item (CSI). Required delivery with Contractor Tested First Article Requirement is 200 each 263 Days After Contract Award (DACA) and up to 100 each year until contract completion. First Article Test Report is due 163 DACA. Required delivery without First Article Test is 200 each 175 DACA and up to 100 each year until contract completion. This requirement is restricted to the approved small businesses listed below: Rotair Industries, Inc. (CAGE: 54878); Seanair Machine Co., Inc. (CAGE: 63630) & Tek Precision Co., LTD (CAGE: 65780) because this part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source require acquisition of the part from the approved source. Adequate technical data is not available for this acquisition. All offerors must meet prequalification requirements in order to be eligible for award. All prospective manufacturers, or distributors, seeking to compete for a solicitation for Aviation and Missile Life Cycle Management Command (AMCOM) Spares, for any restricted source parts, are required to be an AMCOM approved source. To obtain approval, vendors must submit a SAR package, for review and approval, to the Engineering Directorate (ED), Quality Engineering Division. Source approval must be obtained prior to being considered for contract award. Approvals are made on an individual part number basis for a specific manufacturing location (CAGE). Firms are encouraged to seek source approval in order to compete for future solicitations by following the SAR submission guidance provided on the website: http://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsar. Questions concerning SAR submissions can be directed to the ED SAR Team at EDSAR@amrdec.army.mil or call the SAR Team at 256-313-8978, 256-313-0341 or 256-313-8994. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release of solicitation however; solicitation will not close prior to the closing date stated above. Foreign firms are reminded that all requests for solicitation must be processed through their respective embassies. WARNING: THIS ACQUISITION CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT (TITLE 50, USC., APP 2401-2402) EXECUTIVE ORDER 121470. THIS INFORMATION CANNOT BE RELEASED OUTSIDE THE UNITED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. STABLE BASE DRAWING - A COMPUTER AIDED DESIGN (CAD)/TAGGED IMAGE FILE (TIF) IS INCLUDED IN THIS TECHNICAL DATA PACKAGE. IF YOU REQUIRE A DIMENSIONALLY ACCURATE MYLAR PLOT OF THIS IMAGE, YOU MUST CONTACT A CERTIFIED PRODUCER. WHENEVER POSSIBLE, REPRODUCTION SHOULD BE MADE BY THE VENDOR RESPONSIBLE FOR THE DIGITAL IMAGE CREATION. CONSULT THE CAD/TIF DOCUMENT TO DETERMINE IF THE CERTIFIED PRODUCER IS IDENTIFIED. IN CERTAIN MISSILE SYSTEMS AND SOME AVIATION SYSTEMS EZEKIEL IPM @678-281-0139 HAS BEEN CERTIFIED AS A PRODUCER. AMCOM DOES NOT PROVIDE THE APPROPRIATE SOFTWARE TO VIEW THESE FILES OR TO UTILIZE THEM IN THE MANUFACTURING PROCESS. HOWEVER, A 200 DOTS PER INCH (DPI) RASTER IMAGE WITH VIEWER IS ENCLOSED FOR REFERENCE PURPOSES. VIEWER OPTIONS FOR THE 1250 DPI TAGGED IMAGE FILE (TIF) IMAGES: 1. MICROSOFT WINDOWS PICTURE AND FAX VIEWER (INCLUDED IN THE STANDARD SUITE IN WINDOWS XP) 2. TECHSOFT PIXEDIT
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/e2e3a65b22a5f17bc04e0bcc8f05c48f)
- Place of Performance
- Address: ACC-RSA - (Aviation) ATTN: CCAM-ALA/Joan McFarlen, Building 5303, Martin Road Redstone Arsenal AL
- Zip Code: 35898-5280
- Zip Code: 35898-5280
- Record
- SN03419586-W 20140711/140710023309-e2e3a65b22a5f17bc04e0bcc8f05c48f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |