FBODaily.com | FedBizOpps: MOD | 61 | AIRCRAFT ENGINE COVERS/PROTECTORS

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 10, 2014 FBO #4642
MODIFICATION

61 -- AIRCRAFT ENGINE COVERS/PROTECTORS

Notice Date: 8/8/2014
Notice Type: Modification/Amendment
Contracting Office: NAVSUP FLC Puget Sound, Bremerton, WA 98314
ZIP Code: 98314
Solicitation Number: N00406-14-T-4264
Response Due: 8/25/2014
Archive Date: 2/21/2015
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: MODIFICATION NOTICE:Quotes are being solicited under solicitation number N00406-14-T-4264. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 646634_01. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Small Business ] set-aside and only qualified sellers may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Special Shipping Instructions. The FLC - Puget Sound requires the following items, Brand Name or Equal, to the following: LI 001: E/A-18G Aircraft Engine Exhaust Protective Cover: 20" diameter closed end X 36" open diameter X 25" wall height. Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 6, EA; LI 002: E/A-18G Aircraft Left Intake Protective Cover: 64" tall X 40" wide. Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 3, EA; LI 003: E/A-18G Aircraft Right Intake Protective Cover: 64" tall X 40" wide. Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 3, EA; LI 004: E/A-18G Aircraft horizontal stab leading edge protector, 11" width x 83" length. Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 6, EA; LI 005: E/A-18G Aircraft horizontal stab trailing edge protector, 35" width x 127" length Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 6, EA; LI 006: E/A-18G Aircraft inner main wing trailing edge protector, 9" width x 132.5" length Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 6, EA; LI 007: E/A-18G Aircraft outer main wing trailing edge protector,10.5" width x 88" length Wet Weight Aviation Equipment Covers - Less than 16.8 oz/yd2 (ASTM 3776) 100% Waterproof Water column up to 25m (ISO 811) Breathable (Moisture Vapor Transmission Rate) MVTR greater than 550 g/sq. m/24hrs (upright test ASTM-E96B). Greater than 3350 g/sq. m/24hrs (ISO 15496) Inner Wicking Layer Hydrophobic porous material that contacts the protected equipment to wick water away. Vapor Corrosion Inhibitors (VCI) Conditions the micro-environment beneath the cover to displace moisture and chlorides. When water vapor is driven through the outer shell, it must pass through the corrosion inhibitors first, where it picks up the VCI before contacting the surface of the protected equipment. Heat Sealed Seams Thermoplastic adhesive film applied to sewn seams to prevent water intrusion through the seams. Thread Heavy weight polyester thread. Strength of 13.3 lbs. Completely Non-Porous Breathability is not reduced over time due to blockage by dirt, sand, or salt crystals. Tensile Strength 460 x 360 warp x fill /lbs (ASTM D5034). Tongue Tear 20 x 18 warp x fill / lbs (ASTM D2261 ). Abrasion Resistance Greater than 225,000 cycles (ASTM 4966 Martindale Test) 600 cycles (ASTM D3884 Taber Test) Ultraviolet Blockage Over 99% UVA and UVB Blockage. Oil and Hydraulic Fluid Resistant Repels common oil material. Rating of 6 (AATCC 118). Weather Resistant Materials Lifespan of 24-48 months in severe environments. Breaking Strength after Abrasion Resistance 242 x 141 warp x fill / lbs (ASTM-D-5035 after abrasion resistance per ASTM-D-4157). Breaking Strength after Accelerated Weathering 230 x 137 warp x fill /lbs (ASTM-D-5035 after accelerated weathering per FED-STD-191, M 5804). Hydrostatic Resistance 523 psi (ASTM-D-751-06 Procedure A). Stiffness 3.9 at 70 ?F and 3.9 at 20?F (TRAPPI Method T-451). Seam Strength 36.2 lb/in width Need to be reusable and protect against water intrusion, corrosion, heat, UV, sand and other debris., 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Puget Sound intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Puget Sound is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time quotes.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Please see attched solicitation for terms and conditions
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00406/N00406-14-T-4264/listing.html)
Place of Performance: Address: Special Shipping Instructions.; Zip Code: -
Record: SN03458457-W 20140810/140808235633-964bf2ad49c4bba30fe4251220b6017e (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

61 -- AIRCRAFT ENGINE COVERS/PROTECTORS