AWARD
30 -- Award of IQC for NSN 3040-01-329-2189
- Notice Date
- 8/25/2014
- Notice Type
- Award Notice
- NAICS
- 333613
— Mechanical Power Transmission Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX-14-R-0136
- Archive Date
- 9/5/2014
- Point of Contact
- Jeremy P. Feeney, Phone: 6146921803, Matthew M Kirk, Phone: 614-692-4121
- E-Mail Address
-
jeremy.feeney@dla.mil, matthew.kirk@dla.mil
(jeremy.feeney@dla.mil, matthew.kirk@dla.mil)
- Small Business Set-Aside
- N/A
- Award Number
- SPE7MX-14-D-0098
- Award Date
- 8/21/2014
- Awardee
- Tecmotiv (USA) , 1500 James Ave, Niagara Falls, New York 14305, United States
- Award Amount
- $504,292.50
- Line Number
- 0001
- Description
- Federal Business Opportunities (FedBizOpps) Synopsis Information Form CLIN: 0001 Item Name: Cylinder Assembly NSN: 3040-01-329-2189 Annual Demand Quantity: 372 Unit of Issue: EA Destination Information: Various DLA Stocking Locations Delivery Schedule: 270 Days (X) All responsible sources may submit an offer/quote which shall be considered. (X) This acquisition is to establish an Indefinite Quantity Contract (IQC) for NSN 3040-01-329-2189. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years. (X) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and others as described in the solicitation. (X) Solicitation will be solicited as a 100% small business set-aside, and full & open competition after exclusion of sources applies. The solicitation will be available for download on the internet at https://www.dibbs.bsm.mil/RFP on or around its issue date of June 26, 2014. Hard copies are not available. Increments and delivery schedule will be noted on the RFP. Drawings/specifications will be available through DIBBS. TYPE OF SET-ASIDE: 100% Small Business The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil/. Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257). Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. The proposed contract is restricted to domestic sources under the authority of FAR 6.302-3. Accordingly, foreign sources, except Canadian sources, are not eligible for award. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. LTC PID Packaging Header Text PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN: 3040-01-329-2189 PID Text CYLINDER ASSEMBLY 52.246-11 Higher Level Contract Quality Requirement (Manufacturers) FAR CLAUSE 52.246-11 APPLIES. A QUALITY MANAGEMENT PROGRAM MEETING THE REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008 (EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008; OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008 (EXAMPLE SAE AS 9003) IS REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS EXCLUSIONS TO THIS DOCUMENT. DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008 4.1 General requirements, [excluding reference to 1.2 and excluding NOTE3 c)] 4.2.1 General, [excluding subparagraph a)] 4.2.2 Quality manual, [excluding subparagraph a)] 4.2.3 Control of documents 4.2.4 Control of records 5.1 Management commitment 5.3 Quality policy 6.2.2 Competence, training and awareness 6.4 Work environment 7.1 Planning of product realization, [excluding NOTE 2] 7.2.1 Determination of requirements related to the product 7.2.2 Review of requirements related to the product 7.2.3 Customer communication 7.3.7 Control of design and development changes 7.4.1 Purchasing process 7.4.3 Verification of purchased product 7.5.1 Control of production and service provision 7.5.3 Identification and traceability 7.5.4 Customer property 7.5.5 Preservation of product 7.6 Control of monitoring and measuring equipment 8.1 General, [excluding subparagraph b) and subparagraph c)] 8.2.2 Internal audit 8.2.4 Monitoring and measurement of product 8.3 Control of nonconforming product 8.5.2 Corrective action 8.5.3 Preventive action THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." COMPUTER NUMERICALLY CONTROLLED (CNC) MACHINE AND STD. INDUSTRY INSPECTION EQUIPMENT, WHICH PROVIDES EQUAL OR GREATER ACCURACY, MAY BE UTILIZED IN LIEU OF U.S. ARMY DESIGNED INSPECTION EQUIPMENT, (GAGES & FIXTURES), DESCRIBED IN THE DATA PACKAGE PROVIDED. IF AQLS ARE LISTED IN THE SPECIFICATIONS OR DRAWINGS THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE. THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO (I.E. THIS CONTRACT REQUIRES A PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECTS). CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES PREVIOUS SPECIFICATION REQUIREMENTS BUT IT DOESN'T ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY'RE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). IAW BASIC DRAWING NR 19207 7532461 REVISION NR W DTD 03/02/2001 PART PIECE NUMBER: 7532461-1 IAW REFERENCE DRAWING NR 19207 5703405 REVISION NR C DTD 01/01/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 7532461-1 REVISION NR DTD 04/22/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12369005 REVISION NR A DTD 05/14/2007 PART PIECE NUMBER: IAW REFERENCE QAP 19207 7532461 REVISION NR J DTD 08/01/1989 PART PIECE NUMBER: IAW REFERENCE QAP 19207 7532461 REVISION NR DTD 07/08/1991 PART PIECE NUMBER: REFERENCE NUMBER: ZD059 REFERENCE NUMBER: CS187 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS Packaging Text SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •All containers shall meet ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems. •All Section D Packaging Clauses take precedence over ASTM D3951. •In addition to requirements in MIL-STD-129P, all Labeling and Marking shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129 identification labels on all shipping containers, including the unit and intermediate levels. The Method of Preservation (M) of Commercial Pack (CP) shall be applied to all labels and marking as "MCP." •For all shipments of packaged materiel to the Government, which includes either Depot (DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to the Military Shipment Label (MSL) requirement. When the MSL is required, the Transportation Control Number (TCN) is not an exception and must always be present. TCN construction is detailed in DTR 4500.9-R (Appendix L). •The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over ASTM D3951. •Loose-fill cushioning and dunnage materials are prohibited in all shipments to DOD customers. •Unitization in accordance with MIL-STD-147, Palletized Unit Loads, is required for all shipments to the DOD activities.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/Awards/SPE7MX-14-D-0098.html)
- Record
- SN03479810-W 20140827/140826001138-541983357efc69d3e321108dc6621703 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |