SOLICITATION NOTICE
51 -- AIR CHIPPER AND ACCESSORIES
- Notice Date
- 8/26/2014
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 467 W Street, Bremerton, WA 98314
- ZIP Code
- 98314
- Solicitation Number
- N62758-4207-7400
- Response Due
- 9/2/2014
- Archive Date
- 3/1/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N62758-4207-7400 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-02 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Special Shipping Instructions. The FLC - Puget Sound requires the following items, Brand Name or Equal, to the following: LI 001: AIR CHIPPER STROKE SPEED(RPM): 6.000 MIN-1SIZE OF CHISEL CHUCK: 0D 10.5MMAIR CONSUMPTION: 0.15M/MINWEIGHT: 0.9KG MFR NITTO KOHKI PN ACH-16, 32, EA; LI 002: FLAT CHISEL P/N: TQ03431SIZE: 3/4" X 4-3/4"(20MM X 120MM)USE FOR AIR CHIPPER ACH-16 MFR NITTO KOHKI, 400, EA; LI 003: FLAT CHISEL P/N: TQ03452 SIZE: 3/4" X 7-1/16"(20MM X 180MM)USE FOR AIR CHIPPER ACH-16 MFR NITTO KOHKI, 400, EA; LI 004: FLAT CURVED size 3/4" x 4-3/4" 20mm x 120mm use for air chipper ach-16 PN TQ03453 MFR NITTO KOHKI, 170, EA; LI 005: SCALER PNEUMATIC SUPER KELENP/N: S-250AIR PRESSURE: 85PSIAIR CONSUMPTION: 9.5CFMSTROKES PER MINUTE: 2500SPMSHANK SIZE: 1/2" SQUAREHOSE SIZE: 3/8"IDWEIGHT: 9.0LBS MFR NITTO KOHKI, 10, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Puget Sound intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Puget Sound is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bidding On: Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity (a) Preservation, packaging, and packing shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The unit pack quantity that applies to items under this contract is "Industry Standard". (b) Prohibited Packing Materials. The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, computer paper and similar hydroscopic or non-neutral material) is prohibited. (c) Non-Manufactured Wood Packing. All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to www.aphis.usda.gov/ppq/swp/eunmwp.html for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement. If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract. FAST PAY PROCEDURE System for Award Management JUL 2013 52.212-4 Contract Terms and Conditions--Commercial Items SEP 2013 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2014) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): FAR Clauses: http://acquisition.gov/far/ DFARS Clauses: http://www.acq.osd.mil/dpap/dars/dfars/ (End of clause) Export-Controlled Items JUN 2013 ITEM IDENTIFICATION AND VALUATION (JUN 2011) ITEM IDENTIFICATION AND VALUATION (JUN 2011) ALTERNATE I (DEC 2011) Levies on Contract Payments DEC 2006 Notification of Potential Safety Issues JUN 2013 COMBATING TRAFFICKING IN PERSONS (FEB 2009) REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (AUG 2012) PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (DEC 2010) NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011) CONVICT LABOR (JUN 2003) CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (MAR 2012) PROHIBITION OF SEGREGATED FACILITIES (FEB 1999) EQUAL OPPORTUNITY (MAR 2007) AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010) ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) PAYMENT BY ELECTRONIC FUNDS TRANSFER?CENTRAL CONTRACTOR REGISTRATION (OCT 2003) Requirements Relating to Compensation of Former DoD Officials SEP 2011 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (DEC 2012) Buy American--Free Trade Agreement--Balance of Payments Program (DEC 2012) Alternate I JUN 2012 Transportation of Supplies by Sea (JUN 2013) Alternate III MAY 2002 (a) Definition. Covered DoD official is defined in the clause at 252.203-7000, Requirements Relating to Compensation of Former DoD Officials. (b) By submission of this offer, the offeror represents, to the best of its knowledge and belief, that all covered DoD officials employed by or otherwise receiving compensation from the offeror, and who are expected to undertake activities on behalf of the offeror for any resulting contract, are presently in compliance with all post-employment restrictions covered by 18 U.S.C. 207, 41 U.S.C. 2101-2107, and 5 CFR parts 2637 and 2641, including Federal Acquisition Regulation 3.104-2. (End of provision) Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law-Fiscal Year 2013 Appropriations. (April 2013) (a) In accordance with sections 8112 and 8113 of Division C and sections 514 and 515 of Division E of the Consolidated and Further Continuing Appropriations Act, 2013,(Pub. L. 113-6) none of the funds made available by that Act for DoD (including military construction funds) may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (DEC 2012) OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (DEC 2012) ALTERNATE I (APR 2011) (a) Definitions. As used in this clause-- Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except-- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-- (1) ( ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (End of provision) (a) Definitions. ?Commercially available off-the-shelf (COTS) item,? ?component,? ?domestic end product,? ?foreign end product,? ?qualifying country,? ?qualifying country end product,? and ?United States? have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government-- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that-- (i) Each end product, except those listed in paragraph (c)(2) or (3) of this provision, is a domestic end product; and (ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror certifies that the following end products are qualifying country end products: ----------------------------------------------------------------------- (Line Item Number Country of Origin) ----------------------------------------------------------------------- (Country of Origin) (3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'': (Line Item Number)----------------------------------------------------- (Country of Origin (If known))----------------------------------------- (End of provision) BUY AMERICAN--FREE TRADE AGREEMENT --BALANCE OF PAYMENTS PROGRAM CERTIFICATE (NOV 2012) (a) Definitions. ``Bahrainian end product,'' ``commercially available off-the-shelf (COTS) item,'' ``component,'' ``domestic end product,'' ``Free Trade Agreement country,'' ``Free Trade Agreement country end product,'' ``foreign end product,'' ``Moroccan end product,'' ``Panamanian end product,'' ``Peruvian end product,'' ``qualifying country end product,'' and ``United States,'' as used in this provision, have the meanings given in the Buy American--Free Trade Agreements--Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government? (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) For line items subject to Free Trade Agreements, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American--Free Trade Agreements--Balance of Payments Program clause of this solicitation, the offeror certifies that? (i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and (ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror shall identify all end products that are not domestic end products. (i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products: (Line Item Number) (Country of Origin) (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products or Peruvian end products: (Line Item Number)----------------------------------------------------- (Country of Origin)---------------------------------------------------- (iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'': (Line Item Number)----------------------------------------------------- (Country of Origin (If known))----------------------------------------- (End of provision) BUY AMERICAN--FREE TRADE AGREEMENT--BALANCE OF PAYMENTS PROGRAM CERTIFICATE (NOV 2012) ALTERNATE I (NOV 2012) (a) Definitions. ``Canadian end product,'' ``commercially available off-the-shelf (COTS) item,'' ``component,'' ``domestic end product,'' ``foreign end product,'' qualifying country end product,'' and ``United States,'' as used in this provision, have the meanings given in the Buy American--Free Trade Agreements--Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government? (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) For line items subject to Free Trade Agreements, will evaluate offers of qualifying country end products or Canadian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American--Free Trade Agreements--Balance of Payments Program clause of this solicitation, the offeror certifies that? (i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and (ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror shall identify all end products that are not domestic end products. (i) The offeror certifies that the following supplies are qualifying country (except Canadian) end products: (Line Item Number) (Country of Origin) (ii) The offeror certifies that the following supplies are Canadian end products: (Line Item Number) (Country of Origin) (iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'': (Line Item Number)----------------------------------------------------- (Country of Origin (If known))----------------------------------------- (End of provision) 1.The offeror certifies that it is ( ), is not ( ) the actual manufacturer of the item(s) covered by this solicitation/contract. The following information is to be provided by offerors who are not the actual manufacturer: a. Actual Manufacturer(s) Identification [if more than one, identify all]: ACTUAL MFR'S PART NO.OR OTHER IDENTIFICATIONACTUAL MFR'S BUSINESS SIZE*(L, SB, SDB) NAME AND ADDRESS b. Support effort performed by the offeror in addition to purchasing the item(s) for resale to the Government: *Refer to Section K (52.219-1) for the business size standards for this solicitation. L = Large Business. SB = Small Business. SDB = Small Disadvantaged Business. (1) Testing/Quality Assurance:Yes/No (2) Preservation, Packaging, and Packing:Yes/No (3) Bar CodingYes/No (4) Other ______________________________ INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (FEB 2012) The Government contemplates award of a FFP contract resulting from this solicitation. (End of provision) (a) The procedures set forth in FAR 33.103 will be followed for submission and handling of agency protests. (b) All protests filed directly with the agency, NAVSUP Fleet Logistics Center Puget Sound (FLCPS), shall be addressed to the Contracting Officer. A protester may appeal a decision rendered by a Contracting Officer to the Reviewing Official. (c) The Reviewing Official for FLCPS is the Director, Regional Contracting Department (Code 200), NAVSUP Fleet Logistics Center Puget Sound at 467 W Street, Bremerton, WA 98314-5100. (d) Offerors should note that a review of the Contracting Officer?s decision will not extend GAO?s timeliness requirements. Therefore, any subsequent protest to GAO must be filed within 10 days of knowledge of initial adverse agency action. USE OF PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM ? STATISTICAL REPORTING (PPIRS-SR) IN PAST PERFORMANCE EVALUATION (1) The offeror?s past performance shall be evaluated in accordance with FAR 13.106-2 or 15.305(a)(2), as applicable. This procurement is subject to Past Performance Information Retrieval System ? Statistical Reporting (PPIRS-SR), authorized by the Department of Defense for use by participating activities during the acquisition of supplies and services. (2) The purpose of the PPIRS-SR is to provide contracting personnel with quantifiable past performance information regarding delivery and quality, as collected from existing DoD reporting systems. PPIRS-SR uses the past performance data collected to classify each supplier?s performance by Federal Supply Class(es) or Service Code(s). (3) Quality: The method used in PPIRS-SR to classify the quality of a supplier?s past performance is a comparison of quality records among all suppliers who have provided goods or services to the Federal Government which are categorized in the same Federal Supply Class or Service Class (FSC). Based on the comparison among suppliers in a specific FSC group, suppliers are classified by PPIRS-SR into a color rating that represents the supplier?s overall quality performance for that specific Federal Supply Class or Service Class. The following is a summarization of the PPIRS-SR classification colors: 1. Dark Blue:Top 5% of suppliers in FSC group* 2. Purple:Next 10% of suppliers in FSC group* 3. Green:Next 70% of suppliers in FSC group* 4. Yellow:Next 10% of suppliers in FSC group* 5. Red:Bottom 5% of suppliers in FSC group* * If all supplier performance ratings for an entire FSC group are equal, all suppliers in that group will be classified Green. (4) Delivery: Supplier delivery past performance is classified in PPIRS-SR by the supplier?s percentage of on time deliveries. On time deliveries are calculated using the number of line items delivered and a weighting factor which reflects the length of time a delivery was overdue. (5) PPIRS-SR classifications are established monthly for each supplier and can be reviewed at http://www.ppirs.gov/. Suppliers are granted access to PPIRS-SR for their own classifications. Offerors are encouraged to review their own classifications as well as the PPIRS-SR reporting procedures and methodology detailed in the PPIRS-SR Procedures Manual and the PPIRS-SR User Guide available at http://www.ppirs.gov. The method to challenge a rating is also found on the identified website. (6) Suppliers with no history in PPIRS-SR will be considered to have a neutral PPIRS-SR rating. Due to the interrelationship of supplies and/or services to be provided hereunder, the Government reserves the right to make a single award to the offeror whose offer is considered in the best interest of the Government, price and other factors considered. Therefore, offerors proposing less than the entire effort specified herein may be determined to be unacceptable. 1) Award under this procurement will be made to the technically acceptable quote/offer which is most advantageous to the Government, price and past performance considered. 2) Technically Acceptable - In order to be determined technically acceptable, offers must meet or exceed the specifications, delivery requirements, and other terms and conditions in the solicitation and any subsequent amendments. If applicable, offers must also meet the requirements of FAR 52.211-6 Brand Name or Equal. The offer must be determined to be technically acceptable before further consideration. 3) Price - Evaluation of price will include the following: ( )Single Award evaluation per the paragraph entitled "Single Award for All Items". ( )Split Award evaluation per the paragraph entitled ?Evaluation of Offers for Split Awards?. ( )Transportation costs per FAR 52.247-__@@___. ( )Evaluation of Options per FAR 52.217-__@@__. 4) Past Performance - Evaluation of past performance will be based on information obtained from PPIRS-SR as well as any other sources which may have relevant information. A quote/offer with a low PPIRS-SR rating (red or yellow for quality and/or less than a 70 weighted delivery score) may not represent the most advantageous quote/offer to the Government. F.O.B. ORIGIN (FEB 2006); Naval Operational Logistics Support Center (NOLSC) Ready-To-Ship Notice Vendor Directions will be included in any resultant purchase order. The government, through NOLSC, will arrange and pay for transportation. System for Award Management Alternate A MAY 2013 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 (a) Definitions. As used in this clause- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). FAST PAY INVOICE (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* SEE PAGE 3 (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) Pricing Of Contract Modifications DEC 1991 System for Award Management Maintenance JUL 2013 New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00406/N62758-4207-7400/listing.html)
- Place of Performance
- Address: Special Shipping Instructions.
- Zip Code: -
- Zip Code: -
- Record
- SN03480980-W 20140828/140826235402-8dc4bfd1f238840971effaff8645e8d2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |