MODIFICATION
99 -- 3-D Printed Model Lock Gates - REVISION #2
- Notice Date
- 9/2/2014
- Notice Type
- Modification/Amendment
- NAICS
- 339999
— All Other Miscellaneous Manufacturing
- Contracting Office
- USACE CERL, Champaign, P O Box 9005, Champaign, IL 61826-9005
- ZIP Code
- 61826-9005
- Solicitation Number
- W9132T-14-T-GATE
- Response Due
- 9/9/2014
- Archive Date
- 11/1/2014
- Point of Contact
- Ashley M. Farrier, 217-373-4480
- E-Mail Address
-
USACE CERL, Champaign
(ashley.m.farrier@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- PLEASE NOTE THAT THE DUE DATE FOR RESPONSES HAS BEEN EXTENDED TO 9 SEPTEMBER 2014 AT 10:00AM (CDT). This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number for this request for quotations (RFQ) is W9132T-14-T-GATE. This procurement is being conducted under full and open competition. The associated North American Industry Classification System (NAICS) code is 339999, which has a size standard of 500 employees. All applicable clauses and provisions are located in an attachment to this notice. The U.S. Army Engineer Research and Development Center (ERDC), Construction Engineering Research Laboratory (CERL) has a requirement for two (2) scale model lock gates in accordance with the below requirements and the attached drawings. CLIN 0001 Requirements: The Contractor shall 3-D print two scale model lock gates from the supplied drawings. Each gate will consist of two (2) leafs, for a total of 4 pieces to be printed. Each leaf is approximately 2.25 in. x 40.31 in. x 29.21 in. and should be printed in one solid piece. The gates shall be printed using polycarbonate or similar material with a tensile strength of approximately 10,000 psi, a tensile modulus of approximately 330,000 psi, with these properties applicable for temperatures from -10 to 130 degrees F. Each leaf can be printed in two (2) pieces and then glued together to form the final pieces. The glue should have strength that meets the base material (the PC) strength requirement and not degrade at temperatures up to 130 degrees F. The gates will be used by ERDC for laboratory testing and validation of structural monitoring. The Government will provide final drawings of the gates to be printed in the format requested by the successful bidder. The format of the final drawings shall be requested as part of the quote. The quote shall be broken out as a FIRM FIXED PRICE per model: CLIN 0001: 2 Each at $XX.XX for a total price of $XX.XX. THE GATES SHALL BE DELIVERED (F.O.B. Destination) AND INVOICED NO LATER THAN 30 SEPTEMBER 2014. Delivery Address: ERDC-ITL Attn: Matt Smith 3909 Halls Ferry Rd. Vicksburg, MS 39180 QUOTES SHALL INCLUDE: 1. Firm Fixed price 2. Proposed material Spec Sheet 3. Proposed Delivery Date The following factors shall be used to evaluate offers: Technical, Delivery Schedule, and Price. All evaluation factors other than cost or price, when combined, are approximately equal to cost or price. The Government reserves the right to award to other than the lowest price if an offer is found technically acceptable and the proposed delivery schedule is more favorable than that of other offerors. Please provide responses to this notice no later than 9 September 2014 at 10:00 AM, Central Daylight Time (CDT), to: Ashley.m.farrier@usace.army.mil. Telephone responses will not be accepted; all inquiries and quotes shall be submitted by email. * Note: In order to be eligible for award of a Government contract, vendors must be actively registered in the System for Award Management (SAM), have no active exclusions, and complete representations and certifications (both FAR and DFARS). This system combines data that was formerly contained in the Central Contractors Registration (CCR), Online Representation and Certifications (ORCA), and the Excluded Parties List System (EPLS). For more information, review the SAM website at https://www.sam.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/330/W9132T-14-T-GATE/listing.html)
- Place of Performance
- Address: ERDC-ITL 3909 Halls Ferry Rd. Vicksburg MS
- Zip Code: 39180
- Zip Code: 39180
- Record
- SN03491623-W 20140904/140902235129-8f40cb35fbf913a3a5e6a0c36c022d24 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |