MODIFICATION
59 -- Audio Equipment
- Notice Date
- 9/5/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- 2021 Club Road, Fort Bliss, TX 79916
- ZIP Code
- 79916
- Solicitation Number
- W911SG-14-T-9258
- Response Due
- 9/12/2014
- Archive Date
- 3/11/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W911SG-14-T-9258 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-12 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Biss, TX 79916 The MICC Fort Bliss requires the following items, Meet or Exceed, to the following: LI 001: Digital Audio Workstation (DAW) control surface, a Minimum of 8 motorized 100mm faders, transport controls, programmable buttons and knobs, and rotary encoders. Capable of interfacing and controlling Logic X, ProTools11, and Cubase. May consist of two separate components. Similar items are Avid Artist Mix and Artist Control OR Mackie Control Universal Pro, 1, EA; LI 002: 12 channel analog mixer with 100mm faders, built in 24-bit effects, 3 band EQ on main channels, minimum of 6 pre-amps, 4 aux sends, and USB connectivity. With Rack-Mount Ears. Similar item is a Allen and Heath ZED-12FX, 1, EA; LI 003: One 16 channel digital mixer with, motorized faders, digital effects, rack-mountable, 4 band EQ on each channel, digital snake Input, 16 XLR/TRS inputs, USB interface for scene storage, with 24bit/48kHz audio interface. With Rack-Mount ears and LED gooseneck lamp. Similar item is a Allen and Heath Qu-16 NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9)., 1, EA; LI 004: 24 Channel digital mixer with, motorized faders, digital effects, rack-mountable, 4 band EQ on each channel, digital snake Input, 24 XLR/TRS inputs, USB interface with scene storage, with 24bit/48kHz audio interface, 16 bus groups. Must include 3/8? Ply ATA Road case to house mixer with vibration protection and wheels. NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9). Similar item is a Allen and Heath Qu-24, 1, EA; LI 005: 48 channel digital, minimum 24 motorized faders in layers, minimum 8 stereo effects engines, full processing on inputs/outputs, MIDI in/out, Ethernet port, AVIOM-compliant port, built-in talkback and RTA signal generator, S/PDIF and AES3 digital outputs, minimum 30 assignable bus sends, RCA inputs, digital snake input. Must be equipped with DANTES I/O via expansion port card or other means. Must Include 3/8? Ply ATA Road case to house and protect mixer with vibration protection and wheels. Similar item is a Allen and Heath GLD-112 with AH-M DANTE-A Card NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9)., 1, EA; LI 006: minimum 24 channel XLR in ? 12 channel XLR out digital snake head with remote scene-recallable preamps, AVIOM-compliant monitor port, Cat5e connectivity, capable of being chained together or in connection with an 8 channel digital snake head. Rack mountable. NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9). Similar item is a Allen and Heath AR2412, 2, EA; LI 007: minimum 8 channel XLR in 4 channel XLR out digital snake head with remote scene-recallable preamps, Cat5e connectivity, AVIOM compliant monitor port, capable of being chained together or in connection with an 24 channel digital snake. Rack mountable. NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9). Similar item is a Allen and Heath AR84, 2, EA; LI 008: Cat5e cable with locking connectors to digital mixers, minimum 350 feet in length. Similar item is a Allen and Heath AL 8271 NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9)., 1, DRUM; LI 009: Cat5e cable with locking connectors to digital mixers minimum 60 feet in length. Similar item is a Allen and Heath 80? Cable Drum NOTE: Digital Mixers (Items 3-5) must be compatible with Digital snakes (Items 6 and 7) and be compatible with locking connectors in Cat5e drums (items 8 and 9)., 1, DRUM; LI 010: 1,000 watt self-powered PA speakers with dual XLR/TRS inputs, RCA inputs, 12? low frequency driver, locking power cable, Mic/Line input selection, built-in crossover for use with external, subwoofer (Item 11)and threaded pole sockets to connect to subwoofer (Item 11). Similar item is a QSC K12 Note: Items 10-15 must all be from the same manufacturer to insure similar frequency response. All cone/tweeter sizes are minimums in the above PA speakers., 2, EA; LI 011: 1,000 watt self powered subwoofers with dual 12? low frequency drivers, XLR/TRS connectors, locking power connection, pole sockets for connection to PA speakers (Item 10.) Similar item is a QSC KSub Note: Items 10-15 must all be from the same manufacturer to insure similar frequency response. All cone/tweeter sizes are minimums in the above PA speakers., 2, EA; LI 012: self-powered 1,000 watt line array speakers with 12? low frequency drivers, Integrated rigging to lock PA speakers to one another without the use of external hardware, Powercon input and thru connectors, built-in crossover for use with external subwoofers, and minimum 90 degree x 18 degree nominal coverage. Must be able to attach to line array subwoofers (Item 13) via internal hardware. One set of frames for line array speakers or other means of attaching to line array tower or mounting point. Similar item is a QSC KLA12 Note: Items 10-15 must all be from the same manufacturer to insure similar frequency response. All cone/tweeter sizes are minimums in the above PA speakers., 10, EA; LI 013: active 1,000 watt subwoofers with 18? subwoofer. Four subwoofers must be capable of connecting to active line-array speakers (Item 12) via internal hardware Similar items are QSC KLA181 and KW181 Note: Items 10-15 must all be from the same manufacturer to insure similar frequency response. All cone/tweeter sizes are minimums in the above PA speakers., 8, EA; LI 014: 1,000 watt self-powered PA speakers with dual XLR/TRS inputs, RCA inputs, MIC/Line selection, locking IEC power connectors, 8? low frequency drivers, and built-in crossover for use with active subwoofers (Item 11). Similar item is a QSC K8 Note: Items 10-15 must all be from the same manufacturer to insure similar frequency response. All cone/tweeter sizes are minimums in the above PA speakers., 6, EA; LI 015: 170 watt active powered monitor with 6.5? woofer, 3 band EQ, dual XLR/TRS inputs, with floor wedge and Mic-stand mounting capability. Must include adaptor for use with boom microphone stands. Similar item is a Galaxy Hotspot Note: Items 10-15 must all be from the same manufacturer to insure similar frequency response. All cone/tweeter sizes are minimums in the above PA speakers., 1, EA; LI 016: active 3-way studio monitors with rear-firing port, Balanced XLR input, with a frequency range of at least 38Hz-22 kHz. Similar item is a Event 2030, 2, EA; LI 017: active studio monitors with XLR/RCA connectors, three way, adjustable high-pass/low-pass filter, with a frequency response of at least 55Hz-28kHz. Similar item is a Focal CMS50, 1, PAIR; LI 018: foam isolation wedges for studio monitors capable of supporting 100lbs. Similar item is a Auralex MoPad, 1, PAIR; LI 019: large studio monitor stands with floating design and tilt/height adjustment. Similar item is a Iso-Acoustics iso-I8R200, 1, PAIR; LI 020: tall locking PA speaker stands with 100lbs load capacity and height at least 7 feet. Similar item is a Ultimate Support TS-99B, 1, PAIR; LI 021: monitor controller/headphone amplifier with analog and digital I/O, 6 minimum analog input channel. Headphone TRS output channel. Mono mode, control of volume in 0.5dB steps, and remote. Similar item is a Grace Designs m903, 1, EA; LI 022: closed-back headphones with at least 29dB attenuation and 3.5mm stereo plug with 1/4? adaptor. Similar item is a Direct Sound EX-29, 1, PAIR; LI 023: closed back headphones with, 3.5mm plug with 1/4? adaptor, adjustable headband, and black in color. Similar item is a Sony MDR 7506, 1, PAIR; LI 024: Mastering headphones of open-backed design with matched drivers. Mini-XLR to 3.5mm connector and 1/4? adaptor. Frequency response of 10Hz ? 39.8 kHz. Similar item is a AKG K712, 1, PAIR; LI 025: line array towers capable of modular design, 15ft minimum height - 25 feet maximum Able to hold minimum of 400 lbs and stable in winds up to 30 mph. Note: The tower system will be used outside and must be set up and broken down by the user. Similar item is a Applied Electronics LA-12-25, 1, PAIR; LI 026: matched omni-directional small diaphragm condenser microphone with a 3Hz-50 kHz frequency response, XLR connectors, at least 142dB max SPL, 22dB or better self-noise. Similar item is a Earthworks QTCMP, 1, PAIR; LI 027: Vintage-style dynamic supercardiod microphone with built-in swivel mounts, XLR connectors. Similar item is a Shure Super 55, 1, EA; LI 028: headset condenser microphones, micro-dot connector. Two beige and two black in color. Must include adaptor for 1/8? belt-pack transmitter. Similar item is a DPA 4088, 4, EA; LI 029: small-diaphragm condenser supercardiod microphone with micro-dot connector and a frequency response of 20Hz-20 kHz. Three with gooseneck mounting clip for trumpet, three with gooseneck mounting clip for saxophone. Black in color. Must include adaptor for belt-pack transmitter and adaptor for connection to XLR. Similar item is a DPA d:Vote 4099 T/S, 6, EA; LI 030: wireless microphone systems with true-diversity reception, pilot squelch tone, wireless synchronization or transmitter parameters from receiver, illuminated graphic display, automatic frequency scan, rack-mountable to standard rack. Each system will include a rack-mounted receiver with base-plate connector to another receiver, NT2 power supply, and 2 antennas. Six systems will include a wireless hand-held supercardiod condenser microphone with clip and eight systems will include a body-pack transmitter and a clip-on lavalier microphone. All systems must be in the same band. System will also include six 1/4? ? 1/8? cables with locking device to attach 1/8? plug to bodypack. Similar items are Sennheiser EW 512 / EW365, 14, EA; LI 031: active antenna splitters for an 8 receiver system with directional remote paddle antennas. Rack-mountable for standard rack and must be compatible with all wireless systems in Item 30. Similar item is a Sennheiser G3DIRKT8, 2, EA; LI 032: complete wireless in-ear monitor systems with 2 body-pack receivers per transmitter unit, stereo operation, ear buds for each receiver, with 2-XLR input/combo jacks, 1 1/4? output on transmitter and 1 1/8? receiver output jack. 1,680 frequencies. All systems must be on the same frequency band (A-band, G-band, etc.) Similar item is a Sennheiser EW300-2 IEM, 8, EA; LI 033: (Four microphones total in matched pairs) large diaphragm condenser microphones with Omni/Wide Cardiod/Cardiod/Hypercardiod/Figure Eight/and intermediate polar patterns. Low-cut filters and pre-attenuation filters. Peak hold LED and virtually identical sensitivity for each pair. Each matched pair must include shock-mounts, stereo bar, windscreen, and hard case. Similar items are AKG C414 XLII/ST Matched Pair, 2, SETS; LI 034: stereo-condenser microphone in a fixed ORTF pattern with a pair of matched MK4 cardiod capsules. Similar item is a Schoeps ORTF MSTC 64U, 1, EA; LI 035: Stereo ?Coincident dynamic ribbon microphones in a Blumlein and Mid-Side pattern with shock mounts ?Y? extension cable for each stereo ribbon mic. Similar item is a Royer SF12, 2, EA; LI 036: dual-channel FET ribbon-microphone pre-amplifiers, 1U rack dimension. Similar item is a AEA RPQ Ribbon Preamp, 2, EA; LI 037: small diaphragm cardiod condenser microphone for flute with mounting bracket to flute and connector to body pack. Similar item is a Audix ADX10-FLP, 1, EA; LI 038: large-diaphragm dynamic cardiod microphones with integrated blast/wind filter, XLR connector, and integrated filter acting as shock mount on the internal element. For vocal broadcast, trombone, and kick drum applications. Similar item is a Electrovoice RE-20, 2, EA; LI 039: large diaphragm cardiod microphone with at leaset 160dB max SPL, XLR connectors, integrated windscreen. For kick drum. Similar item is a AKG D112, 1, EA; LI 040: cardiod dynamic handheld microphone with integrated on/off switch, XLR connectors, and pneumatic shock mount system for hand-held vocal applications. Similar item is a Shure SM58S, 2, EA; LI 041: passive direct boxes with XLR and 1/4? TRS inputs, XLR outputs, 1/4? TRS thru, 15dB switchable pad, polarity reverse switch, ground lift switch, and Jensen isolation transformers. Similar item is a Radial JDI, 4, EA; LI 042: dual channel direct box with RCA, 3.5mm, XLR, and 1/4? inputs, dual XLR outputs, 15dB attenuation switch, ground lift switch, and isolated transformer. Similar item is a Radial ProAV2, 1, EA; LI 043: Short boom telescoping microphone stands tripod base with quick-release clutch. Black in color. Similar item is a Hercules MS120B, 4, EA; LI 044: telescoping boom microphone stands with boom retainer, tripod base, quick clutch, black in color. Similar item is a Hercules MS605B, 12, EA; LI 045: straight microphone stands with tripod base, locking stand, quick clutch, black in color. Similar item is a Hercules 605B, 8, EA; LI 046: Straight microphones stands with round base, locking clutch, adjustable height, black in color. Similar item is a OnStage MS7201B, 6, EA; LI 047: stereo microphone bars with selectable positioning for stereo coincident or close-space mounting, vertical separations of 1/4?, cable clamp, and microphone stand adaptor. Similar item is a Shure A2ZM, 2, EA; LI 048: Eight of each of the following audio adaptors: -XLR Male ?TRS female -XLR Female ? TRS Female -XLR Male ? XLR Male -XLR Female ? XLR Female -TRS Male ? XLR Male -TRS Male ? XLR Female Similar item is a Hosa, 48, EA; LI 049: Four of the following adaptors: 3.5mm Female-1/4? male; 3.5mm Male-1/4? Female. Similar item is a Hosa, 8, EA; LI 050: 1.5 foot black 16 gauge ?Y? connectors of one male plug and two female plugs for AC power. Black in color. Similar item is a Furman M8DX, 10, EA; LI 051: 15 amp power conditioners with wall-wart spacing, 8 rear panel outlets, one front panel outlet, 12,000amps peak impulse current, two lights and digital meter. Similar item is a Whirlwind Mini-6, 6, EA; LI 052: six-channel, 25?, XLR mini snakes. Similar item is a Firefly Satellite Series 3, 2, EA; LI 053: cable protectors with 3 channels, LED strip illumination, interlocking connectors, and black in color. 24,000 lbs per axle load capacity. Similar item is a PlanetWaves PW-ECT10, 6, EA; LI 054: Balanced XLR cables, black in color with high-density braided shield, carbon polymer shielding in the following lengths and quantities: -Sixteen 5? -Fourteen 10? -Eighteen 20? Similar item is a Monster 500 Series, 48, EA; LI 055: Balanced Studio cables with wound construction of the following: -Ten 2 meter XLR -Six 1 Meter 1/4? -Six 4 meter 1/4? Similar item is a Monster Studiolink series, 22, EA; LI 056: Polyethylene 4U rack and laptop case with TSA locks, cable pass-throughs, Nylon-reinforced trigger latches, wheels and pull handle. Similar item is a SKB StudioFlyer, 1, EA; LI 057: Polyethylene 14U Mixer case with 6U rack space underneath mixer, removable cover, locking casters, and locking twist latches with attachable shelf for laptop computer. Similar item is a SKB GigRig, 1, EA; LI 058: 3U rack drawers with foam storage for wireless systems (handheld microphones, body packs, and batteries) with locks and spring-loaded latches. Similar item is a Gator 3U Wireless Rack, 3, EA; LI 059: 2U locking rack drawers with customizable foam inserts. Similar item is a Middle Atlantic D2-LK-2, 3, EA; LI 060: Case for charging and storing six iPad 2?s with Otterbox Defender and shields, with locking lid, vibration protection, pull out handles and wheels, and integrated charging station. Similar item is a Case Cruzer 6 Pack, 1, EA; LI 061: 3/8? Ply ATA Road Case with casters, hinged lid, with inside dimensions of 34? x 14 1/2? x 15 1/2? high, heavy duty ball corners and clamps, recessed hardware, carpet lined interior, machine riveted. For transport of microphone stands., 1, EA; LI 062: 3/8? Ply ATA Road Case with 4 removable tub drawers, with recessed hardware, ball corners, heavy duty casters, with dimensions of 16 3/4? x 23 1/2? x 29?., 2, EA; LI 063: 3/8? Ply ATA Road Case with 4 removable tub drawers, with recessed hardware, ball corners, heavy duty casters, with dimensions of 18 3/4? x 31 1/2? x 36 1/2?., 2, EA; LI 064: 3/8? Ply ATA Road Case with heavy duty casters, 1/2? foam lining, hinged lid, stackable wheel plates, measuring 21? x 21? x 21?., 2, EA; LI 065: A 3/8? Ply ATA Road Case with heavy duty casters, stacking wheel plates, 1/2? Ply upgrade, recessed catches and handles, ball corners, 30? x 22?., 2, EA; LI 066: 3/8? Ply ATA Road Case for 21U standard rack space with shock mounts, 1/2 ply upgrade, 2? foam surrounding inner shell, heavy duty casters, recessed hardware, heavy gauge ball corners., 2, EA; LI 067: Shipping: FOB Destination, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Bliss intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Bliss is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance. Technical and past performance, when combined, are approximately equal to cost or price. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer?s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) (a) Definition. ?Small business concern,? as used in this clause, means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the size standards in this solicitation. (b) Applicability. This clause applies only to-- (1) Contracts that have been totally set aside or reserved for small business concerns; and (2) Orders set aside for small business concerns under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F).* (c) General. (1) Offers are solicited only from small business concerns. Offers received from concerns that are not small business concerns shall be considered nonresponsive and will be rejected. (2) Any award resulting from this solicitation will be made to a small business concern. (d) Agreement. A small business concern submitting an offer in its own name shall furnish, in performing the contract, only end items manufactured or produced by small business concerns in the United States or its outlying areas. If this procurement is processed under simplified acquisition procedures and the total amount of this contract does not exceed $25,000, a small business concern may furnish the product of any domestic firm. This paragraph does not apply to construction or service contracts. (End of Clause) (a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor. (b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items. (End of clause) (a) 26 U.S.C. 6331(h) authorizes the Internal Revenue Service (IRS) to continuously levy up to 100 percent of contract payments, up to the amount of tax debt. (b) When a levy is imposed on a payment under this contract and the Contractor believes that the levy may result in an inability to perform the contract, the Contractor shall promptly notify the Procuring Contracting Officer in writing, with a copy to the Administrative Contracting Officer, and shall provide? (1) The total dollar amount of the levy; (2) A statement that the Contractor believes that the levy may result in an inability to perform the contract, including rationale and adequate supporting documentation; and (3) Advice as to whether the inability to perform may adversely affect national security, including rationale and adequate supporting documentation. (c) DoD shall promptly review the Contractor?s assessment, and the Procuring Contracting Officer shall provide a written notification to the Contractor including? (1) A statement as to whether DoD agrees that the levy may result in an inability to perform the contract; and (2)(i) If the levy may result in an inability to perform the contract and the lack of performance will adversely affect national security, the total amount of the monies collected that should be returned to the Contractor; or (ii) If the levy may result in an inability to perform the contract but will not impact national security, a recommendation that the Contractor promptly notify the IRS to attempt to resolve the tax situation. (d) Any DoD determination under this clause is not subject to appeal under the Contract Disputes Act. (End of clause) Please read and comply with the attached clauses and provisions as buy terms. Vendors shall submit an item description along with bid in order to verify technical conformity. Offers that do not contain an item description within their bid will not be evaluate and deemed technically unacceptable. Vendors must supply all of the CLIN line items. Offers will not be evaluated based upon partial bids. Please submit all questions in writing to ricky.a.brown54.mil@mail.mil. No questions will be taken over the phone; all questions must be submitted in writing. Questions are due no later than close of business Tuesday, September 2, 2014. Answers will be posted no later than close of business Friday, September 5, 2014. It is your responsibility to ensure that the Government has accurate specifications for each product you propose. The Government requires that you include detailed specification information showing that you are able to meet the requirement. The Government also requires that you provide a manufacturer's specification sheet for any product you propose. Your bid will not be considered if you do not include detailed specification information and manufacturer's specification sheets with your bid. The Government will consider only information provided in your bid and attached documentation. If you do not provide adequate information for the Government to determine whether you have met its requirements, the Government will not make an attempt to locate additional information about the product you propose.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a76705e1c63aa6c672a38d86c5a6c6a8)
- Place of Performance
- Address: Fort Biss, TX 79916
- Zip Code: 79916
- Zip Code: 79916
- Record
- SN03498585-W 20140907/140905235831-a76705e1c63aa6c672a38d86c5a6c6a8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |