MODIFICATION
36 -- STRATASYS 3D PRINTER MATERIAL
- Notice Date
- 9/9/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- 6146 Tisdale RD, Dahlgren, VA 22448
- ZIP Code
- 22448
- Solicitation Number
- N00178-14-Q-4558
- Response Due
- 9/12/2014
- Archive Date
- 3/11/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N00178-14-Q-4558 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of $7.50M.This requirement is unrestricted and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-12 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Virginia Beach, VA 23461 The NAVSEA NSWC - Dahlgren requires the following items, Exact Match Only, to the following: LI 001: Part No. 161-20110, ULTEM 9085 Option, Fortus 400mc allows Fortus 400mc to run ULTEM 9085 material includes 2 ULTEM 9085 Material Packages (PN: 311?10110)Fortus 360/400/900mc Tip Sets - See Attached Deliverables List, 1, EA; LI 002: Part No. 511-10201, T16 Tip Set for Fortus 400mc (ABS?M30, ABS?M30i, ABS?ESD7).010" (.254 mm) Slice Includes one (1) T16 Tip and one (1) T12?SR?30 Tip - See Attached Deliverables List, 2, EA; LI 003: Part No. 511-10400, T16 Tip Set for Fortus 360/400/900mc (PC, PC?ISO and PPSF).010" (.254 mm) Slice Includes two (2) T16 Tips - See Attached Deliverables List, 3, EA; LI 004: Part No. 511-11201T16/T12 SR?100 Tip Set for Fortus eV/eT/360mc/400mc/900m (PC, SR?100).010" (.254 mm) Slice Includes one (1) T16 Tip and one (1) T12?SR?100 Tip - See Attached Deliverables List, 2, EA; LI 005: Part No. 310-00100Foundation Sheet (pkg of 20) Fortus 360/400mc (ABS?M30, ABS?ES7, PC?ABS, PC)T?Class (ABS, ABSi, PC?ABS, PC, PC?ISO) - See Attached Deliverables List, 5, EA; LI 006: Part No. 310-00300Foundation Sheet, PPSF, ULTEM 9085 (pkg of 20) Fortus 400mc (PPSF, ULTEM 9085)FDM Titan (PPSF) - See Attached Deliverables List, 5, EA; LI 007: Part No. 312-20018ULTEM 9085 (Natural) Filament Canister Xtend Fortus 400/900mc, T?Class ULTEM 9085 NAT ? 184ci - See Attached Deliverables List, 5, EA; LI 008: Part No. 310-30600ULTEM Support Canister Fortus 400/900mc, 92 in^3 (1510 cc) - See Attached Deliverables List, 4, EA; LI 009: Part No. 300-00100Z?Stage grease - See Attached Deliverables List, 1, EA; LI 010: Shipping, if required, 1, LT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAVSEA NSWC - Dahlgren intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAVSEA NSWC - Dahlgren is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 60 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the System for Award Management (SAM) database before an award can be made to them. If the offeror is not registered in SAM, it may do so through the SAM website at http://www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. In order to minimize the risk of the government purchasing counterfeit products or unauthorized secondary market equipment, which would not be supported by the Original Equipment Manufacturer (OEM), and to ensure that the Government purchases only equipment that is genuine (i.e., not counterfeit or gray market), authorized (e.g., including appropriate licenses), and supported (e.g., warranty and support services) by the OEM, Vendor shall certify that it is a Manufacturer Authorized Partner as of the date of the submission of their offer, and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing, in accordance with the applicable Manufacturer certification/specialization requirements. Unless otherwise specified, Vendor shall warrant that the products are new, in their original box. By submitting a response to an Request for Quote (RFQ) or Request for Proposal (RFP), the Vendor confirms to have sourced all Manufacturer products submitted in this offer from Manufacturer or through Manufacturer Authorized Partners only, in accordance with Manufacturer's applicable policies in effect at the time of purchase. Vendor shall provide Buyer with a copy of the End User license agreement, and shall warrant that all Manufacturer software is licensed originally to Buyer as the original licensee authorized to use the Manufacturer Software. Net 30 Days Required.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N00178/N00178-14-Q-4558/listing.html)
- Place of Performance
- Address: Virginia Beach, VA 23461
- Zip Code: 23461-2097
- Zip Code: 23461-2097
- Record
- SN03502123-W 20140911/140909235723-f84f2f23a6efe1e8059cfbe4ccef6b79 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |