Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 14, 2014 FBO #4677
SOLICITATION NOTICE

65 -- Synthes Surgical Items

Notice Date

9/12/2014
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

Department of the Navy, Bureau of Medicine and Surgery, Naval Medical Center San Diego, Bldg 1, 34800 Bob Wilson Drive, San Diego, California, 92134-5000, United States
 

ZIP Code

92134-5000
 

Solicitation Number

N0025914T0361
 

Archive Date

10/4/2014
 

Point of Contact

Arnold B. Reyes, Phone: 6195328076
 

E-Mail Address

arnold.reyes@med.navy.mil
(arnold.reyes@med.navy.mil)
 

Small Business Set-Aside

N/A
 

Description

NOTICE TO CONTRACTOR The proposed contract action is for commercial item, which the Naval Medical Center San Diego intends to solicit this requirement on a sole source basis to Depuy Synthes, Inc. This is a COMBINED SYNOPSIS/SOLICITATION for commercial items, prepared in accordance with the format in FAR subpart 12.6, using Simplified Acquisitions Procedures for commercial items found at FAR 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, quotations are being requested and a written solicitation will not be issued. Paper copies of this solicitation will not be available. The solicitation number, N00259-14-T-0361 is issued as a request for quotation (RFQ). The closing date is September 19, 2014 @ 11:00 AM Pacific Daylight Time. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-76. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acq.osd.mil/dpap/dars/dfars/index; http://acquisition.gov/. The North American Industry Classification System (NAICS) Code for this acquisition is 339112; Size: 500. Naval Medical Center San Diego requests responses from responsive sources capable of providing the following supplies/services: CLIN P/N Description Qty 0001 02.118.202 2.7/3.5MM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/4 HOLES/RIGHT 1 0002 02.118.203 2.7/3.SMM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/4 HOLES/LEFT 1 0003 02.118.204 2.7/3.5MM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/6 HOLES/RIGHT 1 0004 02.118.205 2.7/3.5MM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/6 HOLES/LEFT 1 0005 02.118.206 2.7/3.5MM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/8 HOLES/RIGHT 1 0006 02.118.207 2.7/3.5MM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/8 HOLES/LEFT 1 0007 02.119.208 2.7/3.SMM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/10 ROLES/RIGHT 1 0008 02.118.209 2.7/3.5MM VA-LCP ANTEROLATERAL DISTAL TIBIA PL/10 HOLES/LEFT 1 0009 02.118.002 2.7/3.5MM VA-LCP MEDIAL DISTAL TIBIA PLATE/4 HOLES/RIGHT 1 0010 02.118.003 2.7/3.5MM VA-LCP MEDIAL DISTAL TIBIA PLATE/4 HOLES/LEFT 1 0011 02.118.004 2.7/3.5MM VA-LCP MEDIAL DISTAL TIBIA PLATE/6 HOLES/RIGHT 1 0012 02.118.005 2.7/3.SMM VA-LCP MEDIAL DISTAL TIBIA PLATE/6 HOLES/LEFT 1 0013 02.118.006 2.7/3.SMM VA-LCP MEDIAL DISTAL TIBIA PLATE/8 HOLES/RIGHT 1 0014 02.118.007 2.7/3.5MM VA-LCP MEDIAL DISTAL TIBIA PLATE/S HOLES/LEFT 1 0015 02.118.00S 2.7/3.SMM VA-LCP MEDIAL DISTAL TIBIA PLATE/10 HOLES/RIGHT 1 0016 02.118.009 2.7/3.SMM VA-LCP MEDIAL DISTAL TIBIA PLATE/10 HOLES/LEFT 1 0017 02.118.400 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/3 HOLES/RIGHT 1 0018 02.118.401 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/3 HOLES/LEFT 1 0019 02.118.402 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/4 HOLES/RIGHT 1 0020 02.118.403 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/4 HOLES/LEFT 1 0021 02.118.404 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/5 HOLES/RIGHT 1 0022 02.11S.405 2.7MM VA-LCP LATERAL DISTAL FIBTJLA PLATE/5 HOLES/LEFT 1 0023 02.118.406 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/6 HOLES/RIGHT 1 0024 02.118.407 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/6 HOLES/LEFT 1 0025 02.118.408 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/7 HOLES/RIGHT 1 0026 02.118.409 2.7MM VA-LCP LATERAL DISTAL FIBULA PLATE/7 HOLES/LEFT 1 0027 02.211.010 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 10MM 5 0028 02.211.012 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 12MM 5 0029 02.211.014 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 141MM 5 0030 02.211.016 2.7MM VA LCKNG SCREW SLF-TPNG WITH TS STARDRIVE RECESS 16HM 5 0031 02.211.018 2.7MM VA LCKNG SCREW SLF-TPNG WITR TS STARDRIVE RECESS 18MM 5 0032 02.211.020 2.7MM VA LCKNG SCREW SLF-TPNG WITH TS STARDRIVE RECESS 20MM 5 0033 02.211.022 2.7MM VA LCKNG SCREW SLF-TPNG WITR TB STARDRIVE RECESS 22MM 5 0034 02.211.024 2.7MM VA LCKNG SCREW SLF-TPNG WITH TS STA. RIVE RECESS 24MM 5 0035 02.211.026 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 26MM 5 0036 02.211.028 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 2SMM 5 0037 02.211.030 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARORIVE RECESS 30MM 5 0038 02.211.032 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 32MM 5 0039 02.211.034 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 34MM 5 0040 02.211.036 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 36MM 5 0041 02.211.038 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 38MM 5 0042 02.211.040 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 40MM 5 0043 02.211.042 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 42MM 5 0044 02.211.044 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 44MM 5 0045 02.211.046 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 461-IM 5 0046 02.211.048 2.7MM VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 48MM 5 0047 02.211.050 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 50MM 5 0048 02.211.052 2.7MM VA LCKNG SCREW SLF-TPNG IUTH TB STARDRIVE RECESS 52MM 5 0049 02.211.054 2.7 1M VA LCKNG SCREW SLF-TPNG WITH TB STARDRIVE RECESS 54MM 5 0050 02.211.056 2.7 C.I VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 56MM 5 0051 02.211.058 2.7MJ.I VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 58MM 5 0052 02.211.060 2.7MM VA LCKNG SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 60MM 5 0053 02.118.510 2.7MM METAPHYSEAL SCR SLF-TPNG W/TB STRDRV RECSSS/10MM 2 0054 02.118.512 2.7MM METAPHYSEAL SCR SLF•TPNG W/TB STRDRV RECESS/12l1M 2 0055 02.118.514 2.7MM METAPHYSEAL SCR SLF-TPNG W/TB STRDRV RECESS/14MM 2 0056 02.118.516 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/16MM 2 0057 02.118.518 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/18MM 2 0058 02.118.520 2.7MM METAPHYSEAL SCR SLF-TPNG W/TS STRDRV RECESS/20MM 2 0059 02.118.522 2.7MM METAPHYSEAL SCR SLF-TPNG W/TS STRDRV RECESS/22MM 2 0060 02.11S.S24 2.7MM METAPHYSEAL SCR SLF-TPNG W/TS STRDRV RECESS/24MM 2 0061 02.118.526 2.7MM METAPHYSEAL SCR SLF-TPNG W/TB STRDRV RECESS/26MM 2 0062 02.118.52S 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/28MM 2 0063 02.11S.530 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/30MM 2 0064 02.118.532 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/32MM 2 0065 02.118.534 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/34MM 2 0066 02.118.536 2.71-IM METAPHYSEAL SCR SLF-TPNG li/T8 STRDRV RECESS/36MM 2 0067 02.118.538 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/38MM 2 0068 02.118.540 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/40MM 2 0069 02.118.542 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/42MM 2 0070 02.118.544 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/44MM 2 0071 02.118.546 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/46MM 2 0072 02.118.548 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/48MM 2 0073 02.118.550 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/SOMM 2 0074 02.118.552 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/52MM 2 0075 02.118.554 2.7MH METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/54MM 2 0076 02.118.556 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/56MM 2 0077 02.118.558 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/58MM 2 0078 02.118.560 2.7MM METAPHYSEAL SCR SLF-TPNG W/T8 STRDRV RECESS/60MM 2 0079 02.127.110 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/10MM 3 0080 02.127.112 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/12MM 3 0081 02.127.114 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/14MM 3 0082 02.127.116 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/16MM 3 0083 02.127.118 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/18MM 3 0084 02.127.120 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/20MM 3 0085 02.127.122 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/22MM 3 0086 02.127.124 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/24MM 3 0087 02.127.126 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/26MM 3 0088 02.127.128 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/28MM 3 0089 02.127.130 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/30MM 3 0090 02.127.132 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/32MM 3 0091 02.127.134 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/34MM 3 0092 02.127.136 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/36MM 3 0093 02.127.138 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/38MM 3 0094 02.127.140 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/40MM 3 0095 02.127.142 3.5MM VARIABLE ANGLE LOCKING SCR /SLF-TPNG/STRDRV/42MM 3 0096 02.127.144 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/44MM 3 0097 02.127.146 3.5MM VARIABLE ANGLE LOCKING SCR II/SLF-TPNG/STRDRV/46MM 3 0098 02.127.148 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/48MM 3 0099 02.127.150 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/50MM 3 0100 02.127.152 3.5MM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/52MM 3 0101 02.127.154 3.5MM VARIABLE ANGLE LOCKING SCR II/SLF-TPNG/STRDRV/54MM 3 0102 02.127.156 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/56MM 3 0103 02.127.158 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/5BMM 3 0104 02.127.160 3.SMM VARIABLE ANGLE LOCKING SCREW/SLF-TPNG/STRDRV/60MM 3 0105 02.206.210 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/10MM 3 0106 02.206.212 3.SMM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/12MM 3 0107 02.206.214 3.SMM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/14MM 3 0108 02.206.216 3.SMM CRTX SCREN/LOW PROF HD SELF-TAPPING/STAR DRIVE/16MM 3 0109 02.206.218 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/18MM 3 0110 02.206.220 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/20MM 3 0111 02.206.222 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/22MM 3 0112 02.206.224 3.SM11 CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/24MM 3 0113 02.206.226 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/26MM 3 0114 02.206.228 3.SMM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/28MM 3 0115 02.206.230 3.SMM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/30MM 3 0116 02.206.232 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/32MM 3 0117 02.206.234 3.SMM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/34 3 0118 02.206.236 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/36MM 3 0119 02.206.238 3.SMM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/38MM 3 0120 02.206.240 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/40MM 3 0121 02.206.242 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/42MM 3 0122 02.206.244 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/44MM 3 0123 02.206.246 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/46MM 3 0124 02.206.248 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/48MM 3 0125 02.206.250 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR PRIVE/50MM 3 0126 02.206.252 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/52MM 3 0127 02.206.254 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR DRIVE/54MM 3 0128 02.206.256 3.5MM CRTX SCREW/LOW PROF BD SELF-TAPPING/STAR DRIVE/56 3 0129 02.206.258 3.5MM CRTX SCREW/LOW PROF BD SELF-TAPPING/STAR DRIVE/58MM 3 0130 02.206.260 3.5MM CRTX SCREW/LOW PROF HD SELF-TAPPING/STAR PRIVE/60MM 3 0131 03.118.102 GUIDE BLOCK FOR 2.7/3.5MM VA-LCP ANTLAT DSTL TIB PL/RT 1 0132 03.118.103 GUIDE BLOCK FOR 2.7/3.5MM VA-LCP ANTLAT PSTL TIB PL/LT 1 0133 03.118.100 GUIDE BLOCK FOR 2.7/3.5MM VA•LCP MEDL DSTL TIBIA PL/RT 1 0134 03.118.101 GOIDE BLOCK FOR 2.7/3.5MM VA-LCP MEDL DSTL TIBIA PL/LT 1 0135 03.118.106 GUIDE BLOCK FOR 2.7MM VA-LCP LATERAL DISTAL FIBULA PL/RT 1 0136 03.118.107 GUIDE BLOCK FOR 2.7MM VA-LCP LATERAL DISTAL FIBULA PL/LT 1 0137 319.97 SCREW FORCEPS 1 0138 292.16 1.6MM KIRSCHNER WIRE W/TROCAR POINT 150MM 1 0139 323.062 2.0MM DRILL BIT WITH DEPTH MARK/QC/140MM 1 0140 310.23 2.5MM DRILL BIT/QC/GOLD/180 1 0141 315.28 2.7MM THREE-FLUTED DRILL BIT QC/125MM 1 0142 310.288 2.8MM DRILL BIT/QC/165MM 1 0143 03.113.024 2.8MM CALIBRATED DRILL BIT QC 250MM/95MM 1 0144 310.35 3.5MM DRILL BIT/QC/110MM 1 0145 314.467 STARDRIVE SCREWDRIVER SHAFT T8 105MM 1 0146 03.113.019 SCREWDRIVER SHAFT STARDRIVE 165MM 1 0147 03.118.111 SILICONE HANDLE/QUICK COUPLING W/ ROTATING CAP 1 0148 312.24 2.7MM/2.0MM DOUBLE DRILL SLEEVE 1 0149 323.36 3.5MM UNIVERSAL DRILL GUIDE 1 0150 313.353 2.0MM LCP SOLID THREADED DRILL GUIDE 2 0151 312.401 4.0MM/2.9MM DOUBLE DRILL SLEEVE 1 0152 310.87 COUNTERSINK FOR 2.7MM CORTEX SCREWS 1 0153 310.89 COUNTERSINK F/3.51 CORTEX & 4.0MM CANCELLOUS BONE SCREWS 1 0154 03.118.007 PERCUT ANEOUS DEPTH GAUGE FOR 2.7MM SCREWS 1 0155 03.118.009 PERCUTANEOUS DEPTH GAUGE ADAPTOR FOR 3.5MM SCREWS 1 0156 329.04 BENDING IRON FOR 2.7MI4 & 3.5MM PLATES 1 0157 329.05 BENDING IRON FOR 2.7MI4 & 3.5MM PLATES 1 0158 324.024 PUSH-PULL REDUCTION DEVICE 1 0159 314.468 HOLDING SLEEVE FOR STARDRIVE SCREWDRIVER SHAFT T8 1 0160 03.211.002 2.0MM UNIVERSAL VARIABLE ANGLE LOCKING DRILL GUIDE 1 0161 03.110.005 HANDLE FOR TORQUE LIMITING ATTACHMENT 1 0162 03.110.002 TORQUE LIMITING ATTACHMENT 1.2MM 1 0163 03.127.004 2.8MM VA SPHERICAL DRILL GUIDE-LONG 1 0164 03.127.005 TROCAR FOR 2.6MM VA SPHERICAL DRILL GUIDE-LONG 1 0165 03.127.006 PROTECTION SLEEVE FOR 2.8MM VA DRILL GUIDE - LONG 1 0166 03.127.016 2.5MM TORQUE LIMITING HANDLE WITH QC 1 0167 60.116.018 SUPPORT BRACKET KIT FOR TRAYS FOR MODULAR GRAPHIC CASES 1 0168 60.116.019 SUPPORT POSTS FOR SCREW RACK F/MODULAR GRAPHIC CASES 1 0169 60.116.579 LABEL PACK F/2.7MM/3.5MM VA-LCP ANKLE TRAUNA SYSTEM 1 0170 60.118.011 TRAY F/2.7MM/3.5MM VA-LCP ANKLE TRAUMA PLATES 1 0171 60.118.004 SCR RACK F/2.7MM METAPHYSEAL 2.7/J.SMM VA LCKNG/3.5MM CRTX 1 0172 60.118.005 GENERAL INSTRUMENT TRAY F/ 2.7MM/3.5MM VA-LCP ANKLE SYS 1 0173 60.118.007 2/3 INSTR TRAY F/2.7MM/3.SMM VA LOCKING SCREWS 1 0174 61.116-035 GRAPHIC CASE/FULL LENGTH 3 HIGH 1 Under the authority of FAR 13.106-1(b), sole source justification is based on the technical capability of the products and the compatibility of the consumables to the equipment owned by the Clinic. The following FAR/DFARS provisions and clauses are applicable to this procurement: 52.204-13 System for Award Management (JUL 2013) 52.212-1 Instruction to Offerors-Commercial Item (APR 2008) 52.212-2 Evaluation Commercial Items (JAN 1999) 52.212-3 Offeror Representations and Certification--Commercial Items (MAY 2008) 52.212-4 Contract Terms and Conditions--Commercial Items (JUN 2010) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items (JUL 2010) 52.209-6 Protecting the Government's Interest when Subcontracting with Contractors Debarred, Suspended or Proposed for Debarment (DEC 2010) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (FEB 2012) 52.219-28 Post Award Small Business Program Representation (APR 2012) 52.222-3 Convict Labor (JUN 2007) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (JAN 2006) 52.222-21 Prohibition of Segregated Facilities (FEB 1999) 52.222-26 Equal Opportunity (MAR 2002) 52.222-36 Affirmative Action for Workers with Disabilities (JUN 1998) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011)(E.O. 13513) 52.225-13 Restrictions on Certain Foreign Purchases (FEB 2006) 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration (OCT 2003) 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) 52.252-2 Clauses Incorporated By Reference (FEB 1998) 252.225-7001 Buy American Act and Balance of Payments Program (JAN 2009) 252.225-7002 Qualifying Country Sources As Subcontractors (APR 2003) 252.232-7003 Electronic Submission of Payment Requests (MAR 2007) The Government will award a firm, fixed price contract resulting from this combined synopsis/solicitation to the responsive and responsible offeror whose conforming response is determined to provide the best value to the Government, price and other factors considered. The following factors are to be used to evaluate offers: 1) Technical Capability. 2) Past Performance. 3) Price. Technical capability and Past Performance, when combined, are considered more important than price. The Government will only consider firm fixed-price quotations. Offeror must complete and submit with the quotation FAR provision 52.212-3 Offeror Representations and Certifications-Commercial Items (May 2008.) Offeror must be registered to the System for Award Management Registration (SAM) prior to award. The website address is www.sam.gov. A Dunn and Bradstreet number is required to register. Email your quote to Arnold Reyes on or before 11:00 AM Pacific Daylight Time on September 19, 2014. Email: Arnold.Reyes@med.navy.mil Submitter should confirm receipt of email submissions.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DON/BUMED/N00259/N0025914T0361/listing.html)
 

Place of Performance

Address: Naval Medical Center San Diego, 34800 Bob Wilson Drive, San Diego, California, 92134, United States

Zip Code: 92134
 

Record

SN03508596-W 20140914/140912235331-e2567a73a45bfee90fc115f8785a46fa (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |