Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 17, 2014 FBO #4680
DOCUMENT

65 -- EQUIPMENT FOR ARF - $79,259.58 - Attachment

Notice Date

9/15/2014
 

Notice Type

Attachment
 

NAICS

423490 — Other Professional Equipment and Supplies Merchant Wholesalers
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office (NCO) 10;6150 Oak Tree Blvd., Suite 300;Independence OH 44131
 

ZIP Code

44131
 

Solicitation Number

VA25014Q0829
 

Response Due

9/18/2014
 

Archive Date

11/17/2014
 

Point of Contact

PRINCE MEREDITH
 

E-Mail Address

contract specialist
(princelliott.meredith@va.gov)
 

Small Business Set-Aside

Total Small Business
 

Description

Line: MAC-GA-F10D-16 001 MACS GA Frame Dbl Sided 160 Cg 160 Gentle-Air mouse cage frame. Frame includes upper main supply and exhaust plenums. Plenums are removable for cleaning. Plenums are made of 22 gauge stainless steel. Approximate overall frame dimensions: 33"D X 72.45"W X 82.5"H Approximate frame weight: 160 lbs Holds up to 16 mouse cage stacks 10 high, 160 cages. Stainless steel. T304 18 gauge wall, 1" square tube frame. Rugged 5" casters with zerks, 2 casters with brakes. 1 round tube handle on each end within frame for hand protection. Frame and plenums are autoclavable. 2 ea Part: Rev: Line: MAC-RV-F6S-6 002 MACS Rat Frame Single-Side 36 36 rat cage single-sided frame. Frame will house mouse or rat caging. Frame includes upper main supply and exhaust plenums. Plenums are removable for cleaning. Plenums are made of 22 gauge stainless steel. Approximate overall frame dimensions: 28"D X 72.45"W X 82.5"H Approximate frame weight: 100 lbs Holds up to 6 rat cage stacks 6 high, 36 cages. Stainless steel. T304 18 gauge wall, 1" square tube frame. Rugged 5" casters with zerks, 2 casters with brakes. 1 round tube handle on each end within frame for hand protection. Frame and plenums are autoclavable. 1 ea Line: MACS-AHU-TOP B 003 Air Handling Unit Interchangeable Air Handler Unit works with all MACS frames and cages, Top-mount placement. AHU includes, touch screen control panel for adjusting ACH, filter loading indicators, visual and audio alarms for insufficient airflow, plug-in port for remote monitor capability, on/off switch, removable power cord socket. One AHU will supply HEPA filtered air for up to 160 mouse cages or 60 rat cages. Power cord has Type "B" three prong plug connection for 15A/125V, grounded (Part #14A00326). AHU and HEPA filters are not autoclavable. Supply AHU dimensions appx - 20.5"Wx14.25"Dx15.25"H Exhaust AHU dimensions appx - 23.25"Wx14.25"Dx15.25"H 24X17X21 76# 3 ea Line: MAC-GA-V10-6575 A 004 MACS Gentle-Air Vertical Stack Approximate Dimensions per stack: 8.25"W x 13.75"D x 72"H Approximate Weight: 18 lbs. The Gentle-Air vertical mouse cage stack is 10 cages high. This stack holds either Max75 style cages with 75 sq. in. floor for 5 adult mice or Dura and/or Uni style 65 sq. in. floor cages with the spacer added to the yellow docking latch. Spacers are sold separately to this cage stack. The composite bracket is made from Amodel, a nylon with fiberglass filament reinforcement for durability and strength. Each cage stack has a supply plenum side and an exhaust plenum. Cage brackets are attached to the vertical stack and fold up for easy moving and storage. Ends are open for easy cleaning. The stack body is made of 22 gauge stainless steel with brackets molded from composite resin for durability. The stack is autoclavable. 32 ea Line: MAC-RV-V6 D 005 MACS Rat 6 Cage Vertical Stack Approximate Dimensions per stack: 10"W x 19.5"D x 72"H Approximate Weight: 21lbs The standard Gentle-Air vertical rat cage stack is 6 cages high. This stack holds standard size DURA cages with about 143 sq. in. floor area. Each cage stack has a supply plenum side and an exhaust plenum. Cage brackets are attached to the vertical stack and fold up for easy moving and storage. Ends are open for easy cleaning. The stack body is made of 22 gauge stainless steel with 16 gauge brackets. The stack is autoclavable. 6 ea Part: Rev: Line: CH3X5HCT-3 F 006 Card Holder Clip Top Load Rev3 Horizontal Clip Top, Stainless Steel Mouse Cage Card Holders. Designed to hold 3" x 5" standard index card. Use with cages on the MACS-GA Modular Animal Caging System. Dura and Max 75 cages. VTA71 tops. 480 ea Line: CH3X5HHR-1 007 Cardholder - Horz Hanging Rat Horizontal Hanging, Stainless Steel Rat Cage Card Holders. Designed to hold 3" x 5" standard index card and fit over wire lid. Cardholder extends 1" from cage top. Hanging tab is 1.25" wide. 54 ea Line: 11A00983 008 4" to 8" Transition for Hose A transition from 4" Hose to 8" Hose. Used when connecting Exhaust capture hoods to a facility that has 8" drops from the ceiling. Does not include hose or tightening clamps. 3 ea Part: Rev: Line: RC71M-UD 009 Cage, Rodent Max UD A Udel polysulfone mouse cage that provides a full 75 square inches (484 sq. cm.) of floor space allowing maximum density for mice as specified by the ILAR Guide. Autoclavable to 300 degrees Fahrenheit (150 C), strong chemical resistance. Unique X-Flow design allows consistent resin flow during the molding process providing strength and durability for the life of the cage. Accepts flat rim wire bars only. 20/case separated by tissue paper and a 4-way divider. Dimensions: 7-1/4" wide x 11-1/2" long x 5" deep (18.4 cm x 29.2 cm x 12.7 cm) Carton Size: 24" L x 16" W x 18" H; (cm:46 x 41 x 61) Carton Weight 21# 9.1 kg 520 ea Line: VTA71D-UD-FT 010 GA Filter Vent Top Udel Udel polysulfone mouse vent top with filter for use with Gentle Air Ventilated Rack System or MACS modular. Fits standard size 65 and 75 sq.in. mouse cages. Filter top with Reemay replacable filter paper. Autoclavable to 300 degrees F, (150 C). 20/case separated by tissue paper and a 2-way divider Carton dimensions: 16X12X13 Carton weight 17 lbs. 520 Part: Rev: Line: WL71F F 011 Wire Bar, Mouse Flat Mouse Flat Rim Wire Bar Lid, High quality, produced using 304 Quarter Hard Stainless Steel resulting in an extra strong lid. Includes grommet and food divider which folds down for stacking ease. Electropolished for longer life. Fits standard size mouse cages and all 71 Series mouse cages, 20/case. Carton Size: 14" L x 12" W x 9" H, Weight 21# 520 ea Part: Rev: Line: WB16RHE-QT A 012 16 oz. RH Ext.WB 1/4 turn 16 oz. reduced height water bottle, 1/4 turn - Bottle is clear polysulfone - Bottle is autoclavable up to 300 º F. - Ounces and milliliters graduated measurements on each side. - Bottle is low profile wedge shape with #8.5 mouths for use with a ¼ turn external bottle lid (TCN8.5-QT). 534 ea Line: TCCN8.5-QT-ST2.5-SO 013 Cap Combo 8.5 nk 2.5 SO sipper Twist Cap for #8.5 bottle neck, neoprene seal with 2.5 straight open sipper tube 534 ea Part: Rev: Line: RC88D-UD 014 Cage, Rat, Udel Dura Udel polysulfone rat cage with reinforced corners, walls and rims for added life and durability. Autoclavable to 300 degrees Fahrenheit (150 C), strong chemical resistance, 10/case. Provides 141 square inches (910 sq. cm.) of floor space at 1" above cage floor. Unique X-Flow design allows consistent resin flow during the molding process providing strength and durability for the life of the cage. Dimensions: 10-1/4" wide x 18-3/4" long x 8" deep (26 cm x 47.6 cm x 20.3 cm) Carton Size: 21" L x 20.5" W x 18" H, Weight: 33# 54 ea Part: Rev: Line: VTA8X-UD B 015 Rat, Vent Filter Top Assembly Udel polysulfone large mouse/rat filter top with one sheet replaceable filter media. Fits standard size large mouse or rat cage. 2 grommets with spring doors. To be used with rat or large mouse ventilated racks. Dimensions: 10-3/4" x 19-1/4" x 3-1/4" (27.3cm x 48.9cm x 8.3cm). 10/case. Optional solid inserts for vent top available. 54 ea Line: WL88F 016 Wire Bar, Rat Flat Rat Flat Rim Wire Bar Lid - High quality, produced using 304 Stainless Steel resulting in a strong lid. Includes grommet and food divider which folds down for stacking ease. Electropolished for longer life. Fits Series 88 rat cages, 10/case. Carton Size: 20" L x 15" W x 11" H, Carton weight 20 lbs. 54 ea Part: Rev: Line: Expiration Date: 22-Aug-14 14A00348 017 Worm Drive 3-4" Hose Clamp 3-4" Hose Clamp Word Drive Band type 201 SS Screw/bolt Zinc-Plated Steel Band width 9/16 Band thickness.022" 10/pkg 6 Pkg / ea Part: Rev: Line: 13A01166 018 Hose, 4" Red (Exhaust) 15 feet / ea Line: MAC-EH-PVC 019 PVC Thimble Exhaust Connect Thimble exhaust connection for MACS AHU. The thimble connection allows for the capture of exhaust air coming from the unit into the exhaust HVAC system of the facility. The thimble connection is constructed of PVC parts. Attach poly elbow to the exhaust AHU and a clamp to connect to the HVAC 4" flexible duct hose. Thimble connection allows for the capture of all of the exhaust air and a small percentage, relative to the exhaust, of room air. Includes 5' of flexible hose and heavy duty cable ties to connect thimble to building exhaust ductwork. Can not withstand high heat. Not autoclavable. Do not put in high heat cage wash. 3 each / ea Part: Rev: Line: CHE040302-R 020 The Club House - Red High-temperature Red Udel polysulfone club house for mice - Provides Nesting Environment and Environmental Enrichment, Increased Cage Surface Area, Unique wood grain molded design, Stackable, autoclavable to 300 F. Approximate Overall Dimensions: 4.44" L x 3.2" W x 2.25" H. Solid Upper Surface Area: 3" x 2". Colorant: Solvent Red 179 280 per case 18x13x12 31 pounds per case 480 ea Line: RB6-30X24X18-WB 021 6 Cg Rabbit, 5.0 SF, Water Btl 6 Cage Rabbit Unit - Stainless steel construction. The frame is 1" square and is mounted on 5" casters. The casters will have grease zerks and the front two will have a step brake. The back and sides will have fixed wire panels constructed of.156 diameter wire with.25 diameter horizontal supports. The doors will be hinged on the left side. The removable floors will be constructed of 3/8" polypropylene and will have ½" round edged holes on 1 ¼" spacing. The center divider panel will be hinged so it may be raised to allow socialization and a 10 sq foot cage. Only the floor will be constructed of polypropylene. The balance of the cage and rack will be constructed from type 304 stainless steel. The cages will allow 5 square feet per cage. Each cage will have a stainless steel wrapper, sloped on the bottom to divert the waste into the litter pans. Each unit will have individual 22 gauge stainless steel litter pans. The water system will be water bottles, price included. Each unit will have 22 gauge stainless steel "J" type feeders. Cage dimensions will be 30" W x 24" D x 18"T. Line: FREIGHT QUOTE 022 Freight Quote Used only to estimate Freight 1 ea
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BreVAMC/VAMCCO80220/VA25014Q0829/listing.html)
 

Document(s)

Attachment
 

File Name: VA250-14-Q-0829 VA250-14-Q-0829.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1633816&FileName=VA250-14-Q-0829-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1633816&FileName=VA250-14-Q-0829-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: LOUIS STOKES VA MEDICAL CENTER;10701 EAST BLVD;CLEVELAND, OHIO

Zip Code: 44106
 

Record

SN03511670-W 20140917/140915235930-b2222e29b0cc647c9672a5e019bbe73a (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |