MODIFICATION
70 -- VTC Equipment
- Notice Date
- 9/16/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- 3250 Catlin Avenue, Quantico, VA 22134
- ZIP Code
- 22134
- Solicitation Number
- M2040914RCCO054
- Response Due
- 9/18/2014
- Archive Date
- 3/17/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is M2040914RCCO054 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-18 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Quantico, VA 22134 The USMC - Quantico requires the following items, Brand Name or Equal, to the following: LI 001: Audio Mixer, ClearOne 880T,910-151-881,HW, 1, EA; LI 002: AVS Controller, AMX DVX 3156 HD-T All in one, FG1905-24, HW, 1, EA; LI 003: AMX Interface DX Multi-Format Transmitter Module, AMX DXLINK, FG1010-310, HW, 1, EA; LI 004: AMX DVI Interface DX Link HDMI Receiver Module, AMX DXLINK HDMI, FG1010-500, HW, 1, EA; LI 005: Control Panel 19.4" Modero X Series Panoramic Tabletop Touch Panel, MXT-1900L, FG5968-02, HW, 1, EA; LI 006: Power Distribution Unit (110V/220V), NXA-PDU-1508-8, FG673-01, HW, 1, EA; LI 007: Fiber Optic Receiver for HDMI, Audio, and RS-232, Foxbox Rx HDMI MM, 60-1174-21, HW, 1, EA; LI 008: Fiber Optic Receiver for VGA, Audio, and RS-232, Foxbox Tx VGA MM, 60-934-11, HW, 1, EA; LI 009: Fiber Optic Receiver for DVI, Audio, and RS-232, Foxbox Tx DVI MM60-935-11HW, 1, EA; LI 010: HDMI Distribution Amplifiers, Extron HDMI DA2, 60-997-01, HW, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, USMC - Quantico intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. USMC - Quantico is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to the point of contact in the FBO notice, so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 days or less after receipt of order (ARO). If chosen for award, vendor must be registered in the System for Award Management (SAM) prior to award of a contract. Registration information can be found at https://www.sam.gov. If awarded a contract, vendor must register in Wide Area Workflow (WAWF) in order to receive payment. Internet: https://wawf.eb.mil or WAWF Helpdesk: 866-618-5988. Solicitation Provisions Incorporated by Reference 52.204-13 SAM 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders ? Commercial Items (The following numbered items apply: (14), (28), (29), (30), (31), (40), (44), (50). 52.216-4 Economic Price Adjustment52.252-1 52.252-1 252.203-7000 Requirements Relating to Compensation of Former DOD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 252.204-7012 Safeguarding of Unclassified Controlled Technical Information 252.211-7003 Item Unique Identificaton and Valuation 252.232-7003 Electronic Submission of Payment Requestes and Receiving Reports 252.232-7006 Wide Area Workflow 252.232-7010 Levies on Contract Payments 252.243-7001 Pricing of Contract Modifications 252.243-7002 Requests for Equitable Adjustment 252.247-7023 Transportation of Supplies by Sea Questions may be submitted until September 16, 2014 at 11:00am EST. EVALUATION: This acquisition will utilize Lowest Price Technically Acceptable (LPTA) procedures in accordance with FAR 15.101-2. Technical tradeoff will not be made and no additional credit will be given for exceeding acceptability. Award will be made to the acceptable offeror with the lowest evaluated price, which is deemed responsible in accordance with the Federal Acquisition Regulation and whose quote conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, representation and certifications, and other information required by this solicitation. The Government reserves the right to award without discussions. Therefore, each initial offer should contain the offeror?s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if determined necessary by the Contracting Officer. The Government may reject any quote that is evaluated to be unrealistic in terms of requirements, contract terms and conditions, or an unrealistically high or low price when compared to Government estimates, such that the quote is deemed to reflect an inherent lack of competence or failure to comprehend the complexity and risk of the program. Technical acceptability will be evaluated on all quotes. Only those quotes determined to be technically acceptable, either initially or as a result of discussions, will be considered for award. Then, price will be evaluated and the quotes will be listed from lowest to highest price based on the total evaluated price and technical acceptability. Award will be made to the lowest evaluated priced quote meeting the acceptability standards for the non-priced factors. TECHNICAL EVALUATION STANDARD: The contractor shall address the following two factors: 1.Factor 1 ? Technical Capability ? Offeror shall clearly demonstrate its approach to technical ability to meet the requirements of CLIN/Line Items based on meeting the requirements of the Request for Quote, quantity, quality and timeliness of delivery. 2.Factor 2 ? Price ? The offeror shall complete CLIN pricing. In addition to the completed CLIN pricing, the offeror shall provide sufficient price information to allow the contracting officer to determine the completeness and reasonableness of the offerors prices. DISCUSSIONS: If during the evaluation period it is determined to be in the best interest of the Government to hold discussions, Offeror responses to clarifications/discussion notices will be considered in making the source selection decision. AWARD DECISION: The award decisions will be made as follows: (1)Step One ? Determine Technical Acceptability. The technical evaluation, Factor 1, stated above, will assess the offerors capability to satisfy the Government?s requirement. The Government will evaluate all technical capability quotes received by the required date/time. The Technical Capability factor will receive a rating of acceptable and unacceptable. If any factor is rated ?unacceptable?, the entire quote is rendered technically unacceptable, and the quote will be removed from the competitive range. Only quotes deemed technically acceptable (either initially or as the result of discussions) will be considered for award. The ratings are defined in the following table. RatingDescription AcceptableQuote clearly meets the minimum requirements of the solicitation. Only those quotes determined acceptable, either initially or as a result of discussion will be considered for award. Once deemed acceptable, all technical quotes are considered to be equal. UnacceptableQuote does not clearly meet the minimum requirements of the solicitation. Quotes with an unacceptable rating will not be considered for award. Table A-1 (2)Step Two ? Evaluate Price. The offeror?s Price quote will be evaluated, for award purposes, based upon the total price proposed as annotated under Factor 2 ? Price. (3)Step Three ? Award Decision. Award will be made the lowest priced, technically acceptable offeror, subject to a positive responsibility determination in accordance with FAR Part 9 and conformance of the offeror?s quote to the terms and conditions of the solicitation. DISCLAIMER: This is a request for the submission of a quote and does not constitute a contract or authorization to begin work. Nor does an offeror?s submission of a quote constitute a contract or authorize the individual or company to being work. 52.211-6 BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must-- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by-- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/70b384e77c18fb5545179abfd267cbfe)
- Place of Performance
- Address: Quantico, VA 22134
- Zip Code: 22134
- Zip Code: 22134
- Record
- SN03513380-W 20140918/140916235738-70b384e77c18fb5545179abfd267cbfe (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |