MODIFICATION
66 -- Single Cylinder Research Engine
- Notice Date
- 9/23/2014
- Notice Type
- Modification/Amendment
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- ACC-APG - Adelphi, ATTN: AMSRD-ACC, 2800 Powder Mill Road, Adelphi, MD 20783-1197
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX14P0486
- Response Due
- 9/26/2014
- Archive Date
- 11/22/2014
- Point of Contact
- Clay Socha, 3013944348
- E-Mail Address
-
ACC-APG - Adelphi
(clay.w.socha.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number is W911QX-14-P-0486. This acquisition is issued as a Request for quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 05-76. (iv) The associated NAICS code is 334516. The small business size standard is 500. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN0001 One (1) single-cylinder compression-ignition research engine with one (1) diesel common-rail pump, one (1) common rail, and one (1) diesel injector. The engine shall have the flexibility to adapt a different cylinder head and adjust its compression ratio using shims. Engine specification: 0.5-0.6-liter displacement, four (4) valves per cylinder, at least 150-bar maximum continuous cylinder pressure, location for one (1) in-cylinder pressure sensor, and one (1) dummy glow plug for one (1) pressure-sensing glow plug sensor. The contractor shall provide spare parts including gaskets and O-rings, and bolts and nuts required to mount the engine on the engine mount specified in CLIN 0002. CLIN0002 One (1) damped seismic mass engine mount on which the research engine will be mounted. The Contractor shall provide required T-slot nuts and bolts to install the mount on a standard bedplate. Required bedplate drawing shall be provided within five (5) days after contract award. CLIN0003 One (1) driveshaft for the engine deliverable at CLIN 0001, adapters for one (1) flywheel and one (1) dynamometer to connect the engine to the Government-owned Alternating Current (AC) dynamometer (inertia: 8.1 lb-ft2). The Government will integrate the AC dynamometer and a Hottinger Baldwin Messtechnik GmbH (HBM) T40 torque flange and shaft safety guard into the engine after it has been accepted. CLIN0004 One (1) optical encoder set with a crank angle resolution equal to or less than 0.5 degrees. CLIN005 One (1) set of in-cylinder pressure sensors and two (2)-channel charge amplifier(s). CLIN0006 One (1) hardcopy and one (1) DVD of engine drawings, engine build book and user manual, and baseline test results. CLIN0007 One (1) year full warranty on the single-cylinder engine and its components (CLINs 0001 - 0006) beginning the first day after post-installation acceptance by the Technical Point of Contact (TPOC). OPTIONS CLIN1001 One (1) optical engine kit (see specifications below). The engine shall have the flexibility to replace the engine cylinder head on the single-cylinder. The engine shall have a liner window, a bowditch piston extension and piston window, and location for one (1) in-cylinder pressure sensor. The engine shall have the flexibility to use either the liner window, the bowditch piston extension and piston window, or both the liner window and the bowditch piston extension and piston window. The contractor shall provide one (1) spare liner,one (1) piston window, and spare engine parts including gaskets and O-rings, and bolts and nuts. CLIN1002 The contractor shall provide one (1) week of training at Army Research Laboratory, Aberdeen Proving Ground, MD on operations and troubleshooting of the engine kit in CLIN 1001. CLIN1003 One (1) hardcopy and one (1) DVD of engine drawings, engine build book and user manual, and baseline test results. CLIN1004 One (1) year warranty including the parts and components of the system required in CLIN 1001.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/0bf6d3601cd70e6670314995dadcb5b2)
- Place of Performance
- Address: ACC-APG - Adelphi ATTN: AMSRD-ACC, 2800 Powder Mill Road Adelphi MD
- Zip Code: 20783-1197
- Zip Code: 20783-1197
- Record
- SN03524931-W 20140925/140924000258-0bf6d3601cd70e6670314995dadcb5b2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |