DOCUMENT
61 -- Transmitter Wiring Kits - Attachment
- Notice Date
- 11/13/2014
- Notice Type
- Attachment
- NAICS
- 335929
— Other Communication and Energy Wire Manufacturing
- Contracting Office
- FEDERAL AVIATION ADMINISTRATION, AAQ-610 CT - William J. Hughes Technical Center (Atlantic City, NJ)
- Solicitation Number
- 18538
- Response Due
- 11/25/2014
- Archive Date
- 11/25/2014
- Point of Contact
- Daniel Farrell, daniel.farrell@faa.gov, Phone: 609-485-4081
- E-Mail Address
-
Click here to email Daniel Farrell
(daniel.farrell@faa.gov)
- Small Business Set-Aside
- N/A
- Description
- Amendment #1 on 11/13/2014: Q&A attachment added. ******************************************************** Original Announcement on 11/05/2014: 1. INTRODUCTION The Federal Aviation Administration (FAA) ASR-9 RADAR Operational Support Group (AJW-146) may have an upcoming requirement for Transmitter Wiring Kits. This requirement would support the national deployment of Airport Surveillance RADAR (ASR) model-9 locations throughout National Airspace System (NAS). The FAA (AJW-146) will provide the Wiring Kits drawing and part list. The vendor is anticipated to manufacture / procure the parts, assemble the complete kits and ship them to the FAA Logistics Center in Oklahoma City, OK after FAA approval of first article units. The estimated quantity that may be required by the Government is 288. The Transmitter Wiring Kit (P/N ASR9012004) consists of 21 cable assemblies as described in Attachment I. The Federal Aviation Administration (FAA) is seeking companies with experience in manufacturing / assembling cables to include corporate knowledge, technical expertise, facilities, manufacturing / assembly equipment, logistics, configuration management and quality control provisions. 2. INCUMBENT CONTRACTOR N/A 3. NATURE OF COMPETITION The acquisition strategy for the procurement has not been determined at this time. This determination for the level of competition will be based on the results of this market survey. 4. STANDARD LANGUAGE (a) This is not a Screening Information Request or Request for Proposals of any kind; (b) The FAA is not seeking or accepting unsolicited proposals; (c) The FAA will not pay for any information received or costs incurred in preparing the response to the market survey, and responses will not be returned; (d) Any costs associated with the market survey submittal are solely at the interested vendor s expense; (e) The FAA reserves the right to reject, in whole or in part, any input as a result of this market survey; (f) Respondents will not be notified of the results of this survey or results of information submitted; and (g) Any confidential or proprietary information submitted in response to this announcement must be marked accordingly by the vendor. Such information will not be disclosed outside of the acquisition team. 5. NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE The principle North American Industry Classification System (NAICS) code for this effort is 335929, Other Communication and Energy Wire Manufacturing with a size standard of 1,000 employees. 6. SUBMITTAL REQUIREMENTS FOR MARKET SURVEY Interested companies are required to submit the following: (a) Capability Statement: Submit a summary of your firm s capability in meeting the FAA s requirement as described in Attachment I. This statement should not exceed ten (10) pages in length. Please address the following: (i) Does your company have experience in manufacturing cables with potted connector? (ii) Do you have and use a Quality Assurance (QA) process? (iii) Identify warranty policies, extended warranty programs. (iv) What is your potential monthly production/delivery rate? (v) Provide a Rough Order Magnitude (ROM) that identifies current prices for equivalent cables (if available) and any quantity discounts. This ROM will be used for planning purposes only and will not be shared with anyone outside the FAA. The ROM should include shipping cost to FAA Logistics Center in Oklahoma City, OK. (vi) Provide any comments on the requirement (where appropriate) or any additional information to assist the FAA in planning the acquisition strategy. (b) Business Declaration: Please complete Attachment II and provide along with the appropriate Small Business Administration (SBA) certification where applicable. 7. DELIVERY OF SUBMITTALS Interested companies must submit their response to this market survey electronically to the Contracting Officer at daniel.farrell@faa.gov by no later than 5 PM (EST) on November 25, 2014. All questions regarding this market survey must be submitted via email to the Contracting Officer. No telephone calls will be accepted. If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/18657 to view the original announcement.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOT/FAA/WJHTC/18538/listing.html)
- Document(s)
- Attachment
- File Name: Transmitter Wiring Kits_Market Survey Q&A_2014-11-13 (pdf) (https://faaco.faa.gov/index.cfm/attachment/download/46609)
- Link: https://faaco.faa.gov/index.cfm/attachment/download/46609
- File Name: Attachment II - Business Declaration Form (pdf) (https://faaco.faa.gov/index.cfm/attachment/download/46608)
- Link: https://faaco.faa.gov/index.cfm/attachment/download/46608
- File Name: Attachment I - Wiring Kit Description (pdf) (https://faaco.faa.gov/index.cfm/attachment/download/46607)
- Link: https://faaco.faa.gov/index.cfm/attachment/download/46607
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: Transmitter Wiring Kits_Market Survey Q&A_2014-11-13 (pdf) (https://faaco.faa.gov/index.cfm/attachment/download/46609)
- Record
- SN03572787-W 20141115/141113234817-9d4c3f728a47d2b54fe01fbf7ce96e08 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |