Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 11, 2015 FBO #4796
SOLICITATION NOTICE

H -- Crankshaft/Camshaft Inspection & Repair

Notice Date
1/9/2015
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
336350 — Motor Vehicle Transmission and Power Train Parts Manufacturing
 
Contracting Office
MICC - Joint Base Lewis-McChord, Directorate of Contracting, Building 2015, Box 339500, Fort Lewis, WA 98433-9500
 
ZIP Code
98433-9500
 
Solicitation Number
W911S8-15-Q-7139
 
Response Due
1/20/2015
 
Archive Date
3/10/2015
 
Point of Contact
James D. Sprigler, 253-966-1467
 
E-Mail Address
MICC - Joint Base Lewis-McChord
(james.d.sprigler.mil@mail.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. JOINT BASE LEWIS-MCCHORD intends to award multiple BLANKET PURCHASE AGREEMENTS that are advantageous to the U.S. Government, on a firm-fixed-price contract for a Crankshaft/Camshaft Inspection and Repair. The associated North American Industrial Classification System (NAICS) code for this procurement is 336350 with a small business size standard of 750 Employees. This requirement is a total SMALL BUSINESS set-aside and only qualified offerors may submit quotes. JOINT BASE LEWIS-MCHORD requests quotes for an 8 Month BLANKET PURCHASE AGREEMENT. Contractors must be located within a 100-mile radius of JBLM, WA. The selection of resulting from will be made on the basis of the lowest priced and technically acceptable from at least two responsible quoters with acceptable or neutral past performance. Technical Acceptability constitutes: the items offered by the vendor meet the conditions of the Statement of Work included in the solicitation, or the full description and specifications of the quote mark equal quote mark items the vendor is offering are equivalent to or exceed the specifications included in the solicitation. All CLINs shall be quoted FOB Destination to Joint Base Lewis McChord, WA 98433. The Contractor shall propose the following Contract Line ItemNumbers (CLINS): Note: Contractor shall read and comply with the Performance Work Statement when providing quotes on Crankshaft/Camshaft Inspection and Repair. CLIN 0001 Description: Crankshaft Inspection Qty: 234 Each Extended Description: Inspect crankshaft for cracks (to include Magnuflux), scratches and nicks. Inspect main bearing journals and connecting rod journals for taper, out of round, and diameter. Inspect real seal are for roughness, scoring, grooving, flaking, pitting, and galling. Inspect threaded hole in crankshaft for damage. If not serviceable, label as not serviceable and return without repair. Cost per Crankshaft Inspection $ ___________ Total cost $ ____________ CLIN 0002 Description: Camshaft Inspection Qty: 234 Each Extended Description: Inspect camshaft bearing journals and lobes for damage. Measure the diameter of bearing journals using outside micrometer. Measure each cam lobe lift.. If not serviceable, label as not serviceable and return without repair. Cost per Camshaft Inspection $ ___________ Total cost $ ____________ CLIN 0003 Description: Crankshaft Repair Qty: 234 Each Extended Description: Repair crankshaft if scratched or nicked. Repair crankshaft bearing journals if tapered, out of round, or out of specification. Repair crankshaft threaded holes with a thread chaser. Machined crankshafts will be polished, sprayed lightly with 15/40 weight motor oil, placed in a plastic bag and labeled as serviceable. Repairs will be done to NMWR standards. Cost per Crankshaft Repair $ ___________ Total cost $ ____________ CLIN 0004 Description: Camshaft Repair Qty: 234 Each Extended Description Repair camshaft if scratched or nicked. Repair camshaft bearing journals. Repair cam lobe. Machined camshafts will be polished, sprayed lightly with 15/40 weight motor oil, placed in a cardboard box and labeled as serviceable. Repairs will be done to NMWR standards. Cost per Camshaft Repair $ ___________ Total cost $ ____________ CLIN 0005 Description: CONTRACT MANPOWER REPORT (CMR) Qty: 1 Each Extended Description: The Contractor shall report all Contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for Department of the Army via a secure data collection site. The Contractor is required to complete all required data fields using the following web address: http://www.ecmra.mil/, then click on quote mark Department of the Army CMRA quote mark or the icon of the DoD organization that is receiving or benefitting from the contracted services. Reporting requirements take approximately two hours of time for one employee to complete and are generally calculated using an accepted hourly wage for an administrative assistant. Cost per CMR $ ___________ Total cost $ ____________ The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-79 effective 15 Dec 2014. Questions concerning this solicitation shall be addressed to SSG James Sprigler, Contract Specialist, and e-mailed to james.d.sprigler.mil@mail.mil. All questions or inquires must be submitted in writing via email no later than 1:00 p.m. PST on 16 January 2015. No phone calls will be accepted. Any amendments to the solicitation will be posted on the Federal Business Opportunities website. All responses must be received by 1:00 p.m. PST on 20 January 2015. Quotes may be e-mailed to james.d.sprigler.mil@mail.mil. FAR and DFARS Provisions and Clauses: The following provisions and clauses are applicable to this BPA and may be viewed at http://farsite.hill.af.mil/. Provisions: 52.212-1 (Instructions to Offerors- Commercial Items) 52.212-2 (Evaluation - Commercial Items) The Government will establish a BPA resulting from this solicitation to three (3) lowest Responsible quotes that are conforming to the solicitation as the lowest price technically acceptable. 52.212-3 (Offeror Representations and Certifications - Commercial Items) Clauses: 52.204-7 (Central Contractor Registration) 52.212-4 (Contract Terms and Conditions - Commercial Items) 52.212-5 (Contract Terms and Conditions Required to Implement Statues or Executive Orders - Commercial Items) 52.219-6 (Notice of Total Small Business Set Aside) 52.219-28 (Small Business Representation) 52.222-3 (Convict Labor) 52.222-21 (Prohibition of Segregated facilities) 52.222-26 (Equal Opportunity) 52.222-35 (Equal Opportunity for Veterans) 52.222-36 (Affirmative Action for Workers with Disabilities) 52.222-37 (Employment Reports on Veterans) 52.222-50 (Combat Trafficking in Persons) 52.225-13 (Restrictions on Certain Foreign Purchases) 52.232-33 (Payment by Electronic Funds Transfer - Central Contractor Registration) 52.247-34 (F.O.B Destination) 52.252-2 (Clauses Incorporated by Reference) 252.204-7004 Alternate A (Central Contractor Registration), 252.212-7001 (Contract Terms and Conditions required to implement statues or executive orders) 252.225-7001 (Buy American Act and Balance of Payments) 252.225-7002 (Qualifying Country Sources as Subcontractors) 252.232-7003 (Electronic Submission of Payment Requests) To be eligible for an award, contractor must be registered in the Central Contractor Registration (CCR) database. A contractor can contact the CCR by calling 1-888-227-2423 or e-mail at http://www.ccr.gov. NO EXCEPTIONS. A DUNS (Dun and Bradstreet) number is required in order to register. All invoices shall be submitted through Wide Area Work Flow. Register at https://wawf.ef.mil/index.html. Offerors must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. No partial shipments unless otherwise specified at time of order.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/69939252b0c3950592248c01652752c4)
 
Place of Performance
Address: MICC - Joint Base Lewis-McChord Directorate of Contracting, Building 2015, Box 339500 Fort Lewis WA
Zip Code: 98433-9500
 
Record
SN03612353-W 20150111/150109233925-69939252b0c3950592248c01652752c4 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.