Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 15, 2015 FBO #4800
SOURCES SOUGHT

54 -- Prefabricated Metal Storage Shed

Notice Date
1/13/2015
 
Notice Type
Sources Sought
 
NAICS
332311 — Prefabricated Metal Building and Component Manufacturing
 
Contracting Office
ACC - New Jersey, Center for Contracting and Commerce, Building 10 Phipps RD, Picatinny Arsenal, NJ 07806-5000
 
ZIP Code
07806-5000
 
Solicitation Number
W15QKN15X7275
 
Response Due
2/13/2015
 
Archive Date
3/15/2015
 
Point of Contact
Margaret B. Reed, 973-724-3273
 
E-Mail Address
ACC - New Jersey
(margaret.b.reed.civ@mail.mil)
 
Small Business Set-Aside
N/A
 
Description
The US Army, Army Contracting Command -New Jersey (ACC-NJ) Joint Armaments Center, Picatinny Arsenal, NJ 08706-5000 in support of Army Research and Development Center (ARDEC), Fuze Division is conducting market research for companies that can supply a metal storage shed with the following minimum requirements are as follows: 1.A 12'0 quote mark wide x 20'0 quote mark long x 10'0 quote mark high at low eave single roof slope building designed IAW IBC 2009, live load; 20 psf, ground snow load; 40 psf., wind load; 110 mph, collateral load; 0 psf., exposure; quote mark C quote mark. with the following: 2. 6'0 quote mark wide x 7'0 quote mark high x 1-3/4 quote mark thick Double Walk Door, with Push Panic Hardware 1-Leaf Active, RHSO, Door Closer with Hold Open Arm, Ball Bearing Hinges, Solid Leaf Threshold and Weather stripping. 3.Two (2) 32 quote mark wide x 24 quote mark high Adjustable Wall Louver, Manually Operated, frame shall be minimum 14 gauge formed aluminum, blades shall be minimum 12 gauge extruded aluminum mill finish, pull bar operating handle and mesh insect screen. 4.4'0 quote mark wide x 3'0 quote mark high Horizontal Slide Window, Factory assembled with 1/4 quote mark Polycarbonate glazing, Attaching hardware, Sash section shall be of 6030-T5 extruded aluminum with a minimum thickness of.062 quote mark, factory assembled single unit, bronze baked enamel. 5.12'0 quote mark x 20'0 quote mark Tube Steel (4 quote mark x 3 quote mark ) Perimeter Skid with, Recessed Doors, Removable Tie Down Angles, Roof Mounted Lifting Eyes, 2- 2 7/8 quote mark x 6 quote mark x 3/8 quote mark NEMA 4 Hole Stainless Steel Grounding Pad with quote mark Holes Drilled and Tapped for NC13, with an option to Paint Match Building Wall Color (Beige). 6.Sharp edges and corners on doors, covers, and other exposed surfaces should be rounded. Where applicable, all exposed edges and corners shall be rounded to a radius not less than 0.75 millimeters (0.03 inches). Sharp edges and corners that can present a personnel safety hazard or cause equipment damage during usage shall be suitably protected or rounded to a radius not less than 13 millimeters (0.51 inches). 7.Delivery of fully assembled Storage Shed to Picatinny Arsenal, NJ 07806. All necessary transport requirements and permits are responsibility of submitter. 8.Placement of Storage Shed and attachment of Building via Tie Down Angles to existing Concrete slab shall be proposed at an optional cost if available. Companies are invited to submit their capabilities and responses by providing brochures and any information pertaining to their ability to provide the above requested services/products. All information is to be submitted via email at no cost or obligation to the Government; information provided will not be returned. Responses shall also indicate the size of the business entity, large or small and a copy of the most recent System for Award Management (SAM) certifications and representations. Please provide the name of the company, address, POC phone/fax number and email address. TELEPHONE INQUIRIES WILL NOT BE ACCEPTED. This is a Sources Sought/Market Survey Announcement and submission of information will be used for information and planning purposes only. This notice does not constitute a formal Request for Proposal (RFP)/Request for Quote (RFQ). In addition, the Government does not intend to pay for any information provided under this notice. The Government is not obligated to notify respondents of the results of this notice. This notice is open to all business concerns. The closing date for responses to this request is No Later Than (NLT) 13 February 2015. The point of contact for this action is Margaret B. Reed, Contract Specialist, ACC-NJ-JA, Margaret.b.reed.civ@mail.mil.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/62599492b35d3da0f32f9d7b031ce4bb)
 
Place of Performance
Address: ACC - New Jersey Center for Contracting and Commerce, Building 10 Phipps RD Picatinny Arsenal NJ
Zip Code: 07806-5000
 
Record
SN03615565-W 20150115/150113235333-62599492b35d3da0f32f9d7b031ce4bb (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.