MODIFICATION
30 -- Cylinder assembly, actuating, linear
- Notice Date
- 1/18/2015
- Notice Type
- Modification/Amendment
- NAICS
- 333613
— Mechanical Power Transmission Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7L314R0157
- Archive Date
- 3/19/2015
- Point of Contact
- Robert J. Varcho, Phone: 614-692-1372, Richard J Matz, Phone: 614-692-8148
- E-Mail Address
-
robert.varcho@dla.mil, richard.matz@dla.mil
(robert.varcho@dla.mil, richard.matz@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Solicitation SPE7L314R0157 is being reopened, due to changing demands in quantities, creating a scope change. DESCRIPTION: NSN 3040-01-534-6215 - "Cylinder assembly, actuating, linear" is being bought in accordance with designated drawings, which will be available with the solicitation. The required quantity is 96 each, to be shipped to (W25G1U) Susquehanna, PA. The solicitation includes a 200% option, for an additional quantity of 192. FOB Origin and Inspection/Acceptance at Origin is required. Based on Market Research, the Government is not using the policies contained in Part 12, Acquisition of Commercial items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capabilities to satisfy the Governments requirement with a commercial item within 15 days of this notice. This acquisition will be a total set-aside for small business. This solicitation will be available at http://www.dibbs.bsm.dla.mil/rfp on or about 02/02/15. Hard copies of this solicitation are not available. The required delivery for quantity of 96 each is 300 days. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the US by the Trade Agreements Act of 1979. All offers shall be in the English language and in US dollars. Notice: This solicitation contains DLAD Provision 52.215-9023 for Reverse Auction (RA). The Government reserves the right to activate this provision after timely offers have been received and evaluated. All interested suppliers may submit an offer. CYLINDER ASSEMBLY,ACTUATING,LINEAR USE LATEST REVISIONS OF SPECIFICATIONS AND STANDARDS. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. "FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE." IAW BASIC DRAWING NR 18876 11450023 REVISION NR G DTD 03/11/2003 PART PIECE NUMBER: 11450023-9 IAW REFERENCE DRAWING NR 18876 11450165 REVISION NR J DTD 03/16/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450166 REVISION NR J DTD 06/22/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450167 REVISION NR G DTD 04/04/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450173 REVISION NR D DTD 10/03/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450174 REVISION NR J DTD 06/22/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450177 REVISION NR D DTD 06/19/1989 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450178 REVISION NR A DTD 09/10/1985 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450179 REVISION NR D DTD 09/11/1985 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 10250058 REVISION NR G DTD 01/21/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450163 REVISION NR L DTD 06/22/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450028 REVISION NR B DTD 04/06/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450659 REVISION NR C DTD 11/17/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 MIS-20134 REVISION NR G DTD 08/02/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450165-009 REVISION NR J DTD 01/06/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 04939 79P070000 REVISION NR G DTD 11/21/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450023-9 REVISION NR DTD 04/11/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 11450023-009 REVISION NR G DTD 03/22/2005 PART PIECE NUMBER: PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •,,All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951. •,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack. •,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7L314R0157/listing.html)
- Record
- SN03619329-W 20150120/150118233024-167886823f06d8ed3ca3b5da0014e14d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |