MODIFICATION
J -- Peak Shaving Generator Emission Reduction
- Notice Date
- 1/29/2015
- Notice Type
- Modification/Amendment
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Savannah, Attn: CESAS-CT, 100 W. Oglethorpe Ave, Savannah, Georgia, 31402-0889, United States
- ZIP Code
- 31402-0889
- Solicitation Number
- W912HN-15-Z-0001
- Archive Date
- 3/3/2015
- Point of Contact
- Whittni C. Wright, Phone: 9126525476
- E-Mail Address
-
whittni.c.wright@usace.army.mil
(whittni.c.wright@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Peak Shaving Generators Emission Reduction (Service, $2 M) sources sought announcement : This is a Sources Sought/Request for Information only. This is not a Solicitation Announcement, nor is it a Request for Proposal. This request does not obligate the government in any contract award. The US Army Corps of Engineers, Savannah District is issuing this Sources Sought announcement for repair/retrofit services for emission reduction of Peak Shaving Generators to determine interest, availability and capability of business to perform the work as described below. The location of the work is at Fort Gordon, Georgia, Richmond County. The purpose of this project is to provide all labor, materials, equipment, supervision, and engineering necessary to furnish and install emission reducing equipment and continuous monitoring systems on 9, 1960s era, peak shaving diesel generators Model L16-567 Diesel Engines at Ft. Gordon, GA, in order to bring the generators into compliance with the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Stationary Reciprocating Internal Combustion Engines (RICE) 40 CFR 63, Subpart ZZZZ, Table 2c for RICE > 500 HP. All interested firms with 811310 as an approved NAICS code have until 16 February 2015 at 1400 hrs EST to submit the following information: - Name & Address of your Firm - Point of Contact (name/phone/email) - DUNS - Business Size, to include designation as HUBZone, 8(a), Service Disabled Veteran Owned Small Business, Small Disadvantaged Business, Woman-Owned Business, and large business. [If an 8(a) Small Business, your firm must have an office in Region IV (GA, AL, NC, TN, MS, FL, KY, SC)] The Government must be able to verify SBA certification of Hubzone, 8(a) and SDB via SAM. - Bonding capability-both single and aggregate, as evidenced by submission of Surety Company letter stating bonding capacity. - Project information sheets providing evidence of capabilities to perform comparable work on two (2) recent projects. Projects submitted should be no more than five (5) years old have a value of at least $500K. Include the project name and description of the key/salient features of the project, completion date, total value and your company's level of involvement in the project, i.e. subcontractor (type), prime, specific role etc. Additionally, if you were teaming with another firm, clearly identify your role on the project(s) submitted. Please provide at least one point of contact (with email address and phone number) for project validation. The Government will not give credit to projects if the lack of information hinders the ability to determine relevancy and/or level of experience. - Information on Teaming Arrangement (if applicable). Although we are not looking for formal signed agreements at this time, if you intend to "team" with another firm, formally or informally, you must submit information, not more than one (1) page, about your team's involvement. More specifically, you must submit sufficient information for the government to determine the roles each team member will play and what your socio-economic status is or will be considering the proposed arrangement. Therefore, included in your one (1) page if you are a small business and you intend to mentor/protégé and/or JV with a large business both team members must sign agreeing that 51% of the profits and managerial function will go to and be performed by the small business. Likewise, if you are an 8(a) firm intending to mentor/protégé and/or JV with a large business both team members must sign agreeing that 40% of the labor will be performed by the 8(a) firm. Additionally, if the team is a mentor/protégé arrangement, identify the areas that will be mentored. Any supporting documentation that confirms your socio-economic status as a team should be provided. The Government will not give credit to projects if the lack of information hinders the ability to determine relevancy and/or level of experience. The requested information shall be submitted via email to: Whittni.C.Wright@usace.army.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA21/W912HN-15-Z-0001/listing.html)
- Place of Performance
- Address: Fort Gordon, Fort Gordon, Georgia, 30905, United States
- Zip Code: 30905
- Zip Code: 30905
- Record
- SN03627940-W 20150131/150129234708-3742df2dec43c63beb385db2b1af2e07 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |