Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 08, 2015 FBO #4824
DOCUMENT

Y -- BRANCH HEALTH CLINIC MODERNIZATION, BUILDING 1028, NAVAL STATION, KINGS BAY, GEOGRIA - Attachment

Notice Date

2/6/2015
 

Notice Type

Attachment
 

NAICS

236220 — Commercial and Institutional Building Construction
 

Contracting Office

N62470 NAVFAC Atlantic Code AQ 6506 Hampton Blvd, Building A Norfolk, VA
 

Solicitation Number

N6247015R5009
 

Point of Contact

Michelle Gooden 757-322-4083 Katya Oxley 757-322-4735 katya.oxley@navy.mil
 

E-Mail Address

michelle.gooden@navy.mil
(michelle.gooden@navy.mil)
 

Small Business Set-Aside

N/A
 

Description

THIS NOTICE IS PROVIDED FOR INFORMATION PURPOSES ONLY. SOLICITIATION DOCUMENTS WILL NOT BE AVAILABLE FOR DOWNLOADING UNTIL APPROXIMATELY 23 FEBRUARY 2015. Naval Facilities Engineering Command Atlantic intends to issue a request for proposal (RFP) for a Firm Fixed Price contract for the complete renovation of Building 1028, Branch Health Clinic, NSB Kings Bay, Georgia. This will be a full and open competitive procurement. The scope of work consists of the following: The scope of this project will be the complete renovation of Building 1028, Branch Health Clinic, NSB Kings Bay, Georgia. The project is approximately 60,180 GSF and will provide out-patient health services such as Immunizations, Behavioral Health, Education, Optometry, Pharmacy, Physical Therapy, Preventative Medicine, Radiology, Naval Submarine Support Center, Dental, and facility support administrative functions. Construction shall be accomplished in phases. The Clinic shall remain operational throughout the construction. Site work will be limited. Provide redevelopment of parking displaced by AT/FP requirements. This requires pavement, sidewalks and grading and removal of existing pavement. Remove existing underground fuel oil storage tank. A majority of the interior will be demolished. This includes removal of all interior walls, doors, ceiling, casework and floor finishes. Remove all air handlers, ductwork and associated accessories, HVAC piping and associated accessories, air valves, reheat coils, HVAC controls, medical/dental gases, dental equipment, plumbing piping and associated accessories, fire sprinkler piping and associated accessories, and systems abandon in place. The dental air compressor is to remain. Remove interior electrical and communications distribution systems and equipment in renovated areas including panelboards, transformers, disconnect switches, circuit breakers, motor controllers, conduit and wiring, and associated accessories. The existing fire alarm system will be completely removed. Provide finishes, casework, metal stud, gypsum board partitions, acoustical tile and gypsum board ceilings, HVAC systems, plumbing systems, medical dental gases and dental equipment, electrical distribution, lighting and lighting controls, nurse call, public address, electronic security, behavioral health staff assist, cable television, fire sprinkler and fire alarm /mass notification systems. Exterior work includes new blast resistant windows and storefronts systems. Removal of the following hazardous material will be required during demolition: Asbestos containing materials, lead-based paint materials, and PCB ™s / Mercury / Universal waste. Work includes providing a Comprehensive Interior Design (CID) including Structural Interior Design (SID) and Furniture, Fixtures, and Equipment Design (FF and E) and specialized medical/dental equipment; design/construction phasing plan; procurement and installation of a complete FF and E package (a planned modification) and specialized medical/dental equipment (a planned modification); movement of FF and E and specialized medical/dental equipment in support of the temporary swing spaces. Specialized medical and dental equipment includes audiometric testing booths, x-ray equipment, ophthalmological equipment, pulmonary laboratory equipment, dental chairs and sterilizer equipment. Specialized medical technical expertise is required in the following areas: Medical Gas Systems, Nurse Call Systems, Medical Equipment Planning and Installation, Radiation Shielding, Infection Control, and Compliance with applicable provisions of The Joint Commission Statement of Conditions. The Design Team shall include a Medical Planner and a Medical Equipment Planner. A complete RFP package, will be provided with the Phase II solicitation. The drawings and specifications will be marked For Official Use Only (FOUO) / Unclassified and are subject to Distribution Statement C. Please see the instructions below for accessing FOUO information. The period of performance is approximately 908 days after notice to proceed. This project will be awarded as a firm-fixed price contract. The Government reserves the right to enter into negotiations or limit the competitive range. The project construction cost range is approximately $15M-$25M. This contract will require a Performance Bond pursuant to FAR 52.228-15 through an approved surety under the United States Treasury Department Circular 570. Phase I Request for Proposals (RFP) will be available for viewing and downloading on or about 23 February 2015. Proposal due date will be on or about 24 March 2015, 2:00 p.m. EDT North America. The solicitation will be formatted as an RFP in accordance with the requirements designated by Federal Acquisition Regulation (FAR) 15.203 for a negotiated procurement utilizing the Two-Phase Design Build selection procedures of FAR 36.3. This method permits evaluation of proposals based on price competition, technical merit and other factors; permits impartial and comprehensive evaluation of offerors ™ proposal; permits discussions if necessary; and ensures selection of the source whole performance provides the best value to the Government. The solicitation will consist of two (2) phases. Phase I is the qualification phase. Up to five (5) firms will be pre-qualified to participate in Phase II. The Navy will determine which offerors proceed to Phase II. The evaluation factors for Phase I are as follows: Technical Approach, Experience, and Past Performance. Upon determination of the contractors advancing to Phase II, those offerors will receive an RFP containing current and future design specifications. Phase II will include the following evaluation factors: Small Business Utilization, Safety, Energy and Sustainable Design, and Schedule. *A site visit to NSB Kings Bay, GA will be required for this procurement. Offerors will have the opportunity for a site visit during Phase II of the Solicitation. The Government intends on issuing the RFP Solicitation for Phase I and Phase II through the Internet at www.neco.navy.mil and www.fbo.gov. All prospective offerors MUST register themselves on the website. All contractors are encouraged to attempt download prior to obtaining the solicitation through alternate sources. Many firms and commercial printing services have the capability to print the solicitation package and plan holder ™s list off the Internet, if necessary. The official plan holder ™s list will be created by registration and will be available from the website only. Amendments will also be posted on the website for downloading. This will be the normal method for distributing amendments; therefore, it is the offeror ™s responsibility to check the website(s) periodically for any amendments to this solicitation. Accessing FOUO (Unclassified) Information The drawings and specifications are marked For Official Use Only (FOUO) / Unclassified and are subject to Distribution Statement C. Distribution Statement C: Distribution authorized to U.S. Government Agencies and their Contractors; Administrative/Operational use (June 1991). Other requests for this document will be referred to NAVFACENGCOM (Code 51). In order to access/view/download the Request for Proposal, drawings and specification from Federal Business Opportunities (FedBizOpps) each company is required to have a MPIN as described below. The Marketing Partner ID Number (MPIN) is mandatory for SAM registrants and contains nine characters. An MPIN is a personal code (password) that allows you to access government applications such as the FedBizOpps and Past Performance Information Retrieval System (PPIRS). To view your companys MPIN: 1.Go to the SAM Homepage: www.sam.gov. 2.Enter your user ID and password, then click the Log In button. 3.Locate your entity via the Complete Registrations or Incomplete Registrations link under Manage Entity in the left navigation pane. 4.Go to the Business Information page to view and change your MPIN. Getting Your MPIN 1.Look up your DUNS at the following URL: www.sam.gov 2.Check the status of your company profile. It must be active in the System for Award Management (SAM) for the user to be able to register it in FedBizOpps. 3.If there is a problem with the profile, such as expired account or a missing mandatory data element, please contact the Entity Registration Representative for your company. 4.If it is a new SAM registration (within 24 hours), please try again in 24-48 hours (excluding the weekend). That is how long it takes SAM to process the information and send the update to FBO.gov for processing. 5.If your SAM registration is active, and it has been more than 48 hours (excluding the weekend) since it was created, it is generally an issue where the incorrect DUNS/MPIN combination is being used. Please confirm the DUNS/MPIN information with your Entity Registration Representative again to ensure the correct MPIN is being used. Be careful not to confuse the TIN with the MPIN. For large companies with multiple DUNS, pay close attention to which MPIN is assigned to which DUNS. 6.If all of the above items are validated and you are still having an issue, please contact the Federal Service Desk for further assistance. IMPORTANT NOTICE: All contractors submitting bids, proposals or quotes on Department of Defense solicitations must be registered in the System for Award Management (SAM) prior to award of the contract. The purpose of this database is to provide basic business information capabilities and financial information to the Government. The SAM website can be accessed at www.sam.gov. Reference is made to FAR Clause 52.204-7, System for Award Management. Prospective Offerors are encouraged to register as soon as possible. All new contracts can ONLY be made to contractors who are registered in SAM. This requirement will apply to all solicitations and award, regardless of the media used. For inquiries about the Phase I proposal, please contact Michelle Gooden at michelle.gooden@navy.mil.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVFAC/N62470CON/N6247015R5009/listing.html)
 

Document(s)

Attachment
 

File Name: N6247015R5009_Kings_Bay_Synopsis.pdf (https://www.neco.navy.mil/synopsis_file/N6247015R5009_Kings_Bay_Synopsis.pdf)

Link: https://www.neco.navy.mil/synopsis_file/N6247015R5009_Kings_Bay_Synopsis.pdf

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN03636141-W 20150208/150206235248-8a523b395c2a9a8fddd8fbcd2a766ed6 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |