SOURCES SOUGHT
66 -- Ultrafast Laser Oscillator
- Notice Date
- 2/9/2015
- Notice Type
- Sources Sought
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC_020915-OSCILTRS(LL)
- Archive Date
- 2/25/2015
- Point of Contact
- Lorenza S. Ladao,
- E-Mail Address
-
lladao@SLAC.stanford.edu
(lladao@SLAC.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC seeks vendors that can provide Ultrafast Laser Oscillator with the following minimum specifications: a) The parameters of the oscillator are specified as follows. • Pulse repetition rate frequency 61.9048 MHz±0.1 kHz fixed • Average optical output power >100 mW • Pulse duration <200 fs • Pulses have no pedestals, no satellite pulses, no background, soliton shape • Center wavelength out of laser oscillator 1030±1 nm • Spectral bandwidth transform limited, soliton or gaussian shape, no ripples, no pedestals, un- chirped • Time-bandwidth product <0.33 (200 fs correspond to about 6.0 nm) • Collimated free space output, M2 <1.1 • Polarization extinction ratio >23 dB, fixed in direction • Timing jitter <20 fs rms [1 kHz - 10 MHz] • Amplitude noise <0.1% rms (1 h) • No ASE background • RIN performance shot-noise limited Synchronization : • Synchronization module for laser platform • Requires option: Built-in piezo electric transducer (PZT) and internal photodiode (PDI) • Phase locked loop bandwidth >500 Hz • Residual timing jitter relative to reference <20 fs rms [DC - 10 MHz] • Frequency drift relative to reference input frequency: • 1h: 0 Hz, 24h: 0 Hz, 18◦ C - 32◦ C: 0 Hz • Input requirements: low-noise RF reference frequency input: 61.9048 MHz • Input requirements: drift of reference signal is required to be <10 Hz on minute time scale b) The oscillator will be synchronized to the FEL (electronic synchronization or optical synchronization). c) The repetition rate of the oscillator is a harmonic to 1300/1400 (0.9286) MHz. d) The output of the oscillator is used: as seed source for a high power fiber amplifier sys- tem (70%); to derive an electronic signal for electronic synchronization (2%); for optical synchronization to FEL (10%); to measure slow timing drifts in the amplifier system (18%). e) Customer support required with a response time of <24 h. f) If the company (vendor) does not have an established customer support with a response time of <24 h, an additional spare oscillator is required. THIS IS NOT A REQUEST FOR QUOTE. VENDORS INTERESTED IN BEING CONSIDERED AS A POTENTIAL SOURCE SHOULD IDENTIFY THEMSELVES AS AN "INTERESTED PARTY" VIA THE FBO PORTAL. DO NOT CONTACT THE SUBCONTRACT ADMINISTRATOR.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_020915-OSCILTRS(LL)/listing.html)
- Place of Performance
- Address: SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN03636981-W 20150211/150209234445-432d0ca7f4e9cbb4766311aacfe29b3c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |