SOURCES SOUGHT
66 -- Fiber Amplifier System
- Notice Date
- 2/9/2015
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC_020915-AMP(LL)
- Archive Date
- 2/25/2015
- Point of Contact
- Lorenza S. Ladao,
- E-Mail Address
-
lladao@SLAC.stanford.edu
(lladao@SLAC.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC seeks vendors that can provide High Power Fiber Amplifier Systems with the following minimum specifications: a) The parameters of the high power fiber amplifier system are specified below. • Pulse repetition rate frequency 0.1-1 MHz variable (nominal 0.1 MHz) • Average optical output power 35 W (29 W+6 W uncompressed) • Pulse duration <400 fs • Pulse energy >200 µ J • Pulse energy stability <0.5% over 24 hours • Center wavelength 1030±1 nm • Spectral bandwidth with no ripples, no pedestals, gaussian • Time-bandwidth product <0.5 (400 fs correspond to about 4.4 nm at FWHM) • Collimated free space output, M2 <1.2 • Polarization extinction ratio >30 dB, fixed in direction • Ellipticity >0.9 • Pulses have no pedestals, no background, satellite pulses (third order) <10% • No ASE background • Diode lifetime >1 year at 24/7 operation. b) The high power fiber amplifier system is seeded with a 1030 nm passively mode-locked soliton ultrafast laser. c) An uncompressed output beam with 6 W average power is required to seed an Yb:YAG high power amplifier. d) The main compressed fiber amplifier output with 29 W of average power is used to pump and seed the OPCPA pre-amplifier. e) Customer support required with a response time of <24 h. f) On-site installation of laser amplifier. THIS IS NOT A REQUEST FOR QUOTE. VENDORS INTERESTED IN BEING CONSIDERED AS A POTENTIAL SOURCE SHOULD IDENTIFY THEMSELVES AS AN "INTERESTED PARTY" VIA THE FBO PORTAL. DO NOT CONTACT THE SUBCONTRACT ADMINISTRATOR.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_020915-AMP(LL)/listing.html)
- Place of Performance
- Address: SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN03637000-W 20150211/150209234457-000de498b86bafaccc310b8a617302f2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |