SOLICITATION NOTICE
49 -- AMERORS EQUIPMENT
- Notice Date
- 3/11/2015
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- SA-11B, Dunn Loring, VA 22027
- ZIP Code
- 22027
- Solicitation Number
- FY15-GC-355
- Response Due
- 3/16/2015
- Archive Date
- 9/12/2015
- Point of Contact
- Name: Granger Cissel, Title: Supply Systems Manager, Phone: 5712269620, Fax:
- E-Mail Address
-
cisselg@state.gov;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is FY15-GC-355 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-80. The associated North American Industrial Classification System (NAICS) code for this procurement is 238990 with a small business size standard of $15.00M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-03-16 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Sterling, VA 20166 The Department of State requires the following items, Brand Name or Equal, to the following: LI 001: REMINGTON 870 Mag Tube Cap Pliers 915-529-100AH, 7, EA; LI 002: REMINGTON 870 Bore Snake (12GA.) 664-300-012AH, 7, EA; LI 003: REMINGTON 870 Magazine Tube Dent Raiser 080-870-206AH, 7, EA; LI 004: REMINGTON 870/1100 Service Kit: Consist of 080-870-010AH, 7, EA; LI 005: REMINGTON 870 Forend Wrench 080-870-202AH, 7, EA; LI 006: REMINGTON 870 Detent Staking Punch 080-870-205AH, 7, EA; LI 007: REMINGTON 870 Rivot Staking Tool Set 080-612-000AH, 7, EA; LI 008: REMINGTON 870 Shell Latch Staker 080-870-203AH, 7, EA; LI 009: REMINGTON 870 Starret Punch 827-525-800AH, 7, EA; LI 010: REMINGTON 870 Buttstock Bolt Wrench 080-870-200AH, 7, EA; LI 011: REMINGTON 870 Pin Pusher 080-870-110AH, 7, EA; LI 012: GLOCK 17 Disassembly Tool 100-005-935AH, 7, EA; LI 013: GLOCK 17 Nut Driver (Front Sight) 066-800-300AH, 7, EA; LI 014: GLOCK 17 Rear Sight Mover 584-045-017AH, 7, EA; LI 015: GLOCK 17 Front Sight Staking Tool Available from Glock, 7, EA; LI 016: GLOCK 17 Channel Liner Tool 777-100-017AH, 7, EA; LI 017: GLOCK 17 Go/No-Go Gauge 184-000-042AH, 7, EA; LI 018: M4/AR10 GAS TUBE RETAINING PIN 5/64THX5/16" EU0160, 100, EA; LI 019: M4/AR10 GASTUBE RETAINING PIN 5/64THX1/2" EA1132, 100, EA; LI 020: M4/AR10 FRONT SLING SWIVEL RIVET EU0185, 200, EA; LI 021: M4/AR10 FRONT SLING SWIVEL PIN EU0180, 40, EA; LI 022: M4/AR10 EJECTOR PIN(5.56) EB0090, 200, EA; LI 023: M4/AR10 EJECTOR PIN(7.62) EA1040, 200, EA; LI 024: M4/AR10 BOLT STOP PIN EL0220, 40, EA; LI 025: M4/AR10 TRIGGER GUARD PIN EL0430, 40, EA; LI 026: M4/AR10 FIRING PIN RETAINING PIN EB0010, 100, EA; LI 027: M4/AR10 FIRING PIN EB0020, 20, EA; LI 028: M4/AR10 GAS RINGS 3pc EB0120, 120, EA; LI 029: M4/AR10 EXTRACTOR SPRING PLUNGER EB0080, 40, EA; LI 030: M4/AR10 EXTRACTOR SPRING EB0070, 40, EA; LI 031: M4/AR10 EXTRACTOR SPRING O-RING EB0065, 40, EA; LI 032: M4/AR10 SAFETY/ EJECTOR SPRING EB0110, 80, EA; LI 033: M4/AR10 EJECTOR EB0100, 20, EA; LI 034: M4/AR10 EXTRACTOR EB0060, 20, EA; LI 035: M4/AR10 FIRING RETAINING PIN EA1009, 100, EA; LI 036: M4/AR10 FIRING PIN SPRING (7.62) EA1011, 40, EA; LI 037: M4/AR10 FIRING PIN EA1010, 20, EA; LI 038: M4/AR10 GAS RING (MCFARLAND) EA1055, 60, EA; LI 039: M4/AR10 EXTRACTOR SPRING KIT 10403030, 40, EA; LI 040: M4/AR10 EJECTOR SPRING EA1050, 60, EA; LI 041: M4/AR10 EJECTOR EA1045, 20, EA; LI 042: M4/AR10 D-RING HAMMER(NEW STYLE) 10308020, 40, EA; LI 043: M4/AR10 DETENT PIN EL0150, 200, EA; LI 044: M4/AR10 DETENT SPRING EL1040, 200, EA; LI 045: M4/AR10 SAFETY DETENT EL0060, 40, EA; LI 046: M4/AR10 GAS KEY EB0150, 20, EA; LI 047: M4/AR10 GAS KEY SCREWS EB0140, 40, EA; LI 048: M4/AR10 M4 GAS TUBE EC0060, 8, EA; LI 049: M4/AR10 CARBINE GAS TUBE(MID-LENGTH) EC0058, 8, EA; LI 050: M4/AR10 RIFLE LENGTH GAS TUBE EU0170, 8, EA; LI 051: M4/AR10 RIFLE LENGTH GAS TUBE(7.62) 10007010, 8, EA; LI 052: M4/AR10 CARBINE GAS TUBE (7.62) 10007005, 8, EA; LI 053: M4/AR10 BUFFER DETENT EL0190, 40, EA; LI 054: M4/AR10 BUFFER DETENT SPRING EL0200, 40, EA; LI 055: GLOCK 17 FIRING PIN SPRING CUPS 70, 240, EA; LI 056: GLOCK 17 FIRING PIN SAFETY SPRING SP00077, 120, EA; LI 057: GLOCK 17 TRIGGER SPRING 350, 120, EA; LI 058: GLOCK 17 SLIDE LOCK SPRING 5446, 20, EA; LI 059: GLOCK 17 SLIDE STOP LEVER AND SPRING 2919, 40, EA; LI 060: GLOCK 17 RECOIL SPRING ASSEMBLY SP01533, 100, EA; LI 061: GLOCK 17 LOCKING BLOCK 1447, 40, EA; LI 062: GLOCK 17 LOCKING BLOCK PIN 4368, 60, EA; LI 063: GLOCK 17 TRIGGER PIN 420, 40, EA; LI 064: GLOCK 17 CONNECTOR 343, 40, EA; LI 065: GLOCK 17 TRIGGER BAR ASSEMBLY 357, 20, EA; LI 066: GLOCK 17 TRIGGER MECHANISM HOUSING W/ EJECTOR 322, 20, EA; LI 067: GLOCK 17 TRIGGER HOUSING PIN, POLYMER 427, 20, EA; LI 068: GLOCK 17 SLIDE COVER PLATE 133, 20, EA; LI 069: GLOCK 17 FIRING PIN 49, 20, EA; LI 070: GLOCK 17 FIRING PIN SPACER SLEEVE 56, 20, EA; LI 071: GLOCK 17 REAR SIGHT, FIXED, POLYMER SP00154, 120, EA; LI 072: GLOCK 17 FRONT SIGHT, FIXED, POLYMER SP06956, 120, EA; LI 073: GLOCK 17 Barrel 9x19mm SP03570/3577, 80, EA; LI 074: REMINGTON 870 Extractor 16176, 10, EA; LI 075: REMINGTON 870 Extractor spring 17432, 10, EA; LI 076: REMINGTON 870 Extractor Plunger 17433, 10, EA; LI 077: REMINGTON 870 Ejector spring 18855, 4, EA; LI 078: REMINGTON 870 Ejector Spring Housing 99539 (3inch), 8, EA; LI 079: REMINGTON 870 Ejector Rivot (Front) 18646, 4, EA; LI 080: REMINGTON 870 Ejector Rivot (Back) 18647, 4, EA; LI 081: REMINGTON 870 Trigger palte Pin (Rear) 20601, 4, EA; LI 082: REMINGTON 870 Trigger Plate Pin (Front) 20609, 4, EA; LI 083: REMINGTON 870 Shell Latch 12ga. (Left) 102310, 2, EA; LI 084: REMINGTON 870 Shell Latch 12ga. (Right) 102315, 2, EA; LI 085: REMINGTON 870 Magazine Retainer 12ga. 91657, 4, EA; LI 086: REMINGTON 870 Safety Switch 25115, 4, EA; LI 087: REMINGTON 870 Trigger plate Pin Detent (Front) 17539, 8, EA; LI 088: REMINGTON 870 Trigger Plate Pin Detent (Rear) 17540, 8, EA; LI 089: REMINGTON 870 Firing Pin 17436, 4, EA; LI 090: REMINGTON 870 Firing Pin Spring 93505, 4, EA; LI 091: REMINGTON 870 Sear Spring 17518, 10, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a ?Brand Name Only? procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). New Equipment ONLY;NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 90 calendar days after close of Buy Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines.Information can be found at www.sam.gov. Delivery must be made within 60 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 60 - required to make delivery after it receives a purchase order from the buyer. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The Buyer will review the bids and make a selection on FedBid. Selected Seller means the Seller that submits the Selected Bid. Selected Bid means a Bid submitted by a Seller in response to an IFB, which Bid meets or exceeds the Buyer�s requirements and is accepted by the Buyer pursuant to the terms of the Bid. Participating sellers will note that there may be a 4 to 6 week delay from the time that the Selected Seller receives notification from FedBid to the time that the Selected Seller receives the award document from the Department of State. FedBid will invoice the Selected Seller after the Buyer has accepted a Seller�s bid. The FedBid invoice will include system-generated competition-specific information for identification and referencing purposes. The Selected Seller is responsible for remitting any FedBid fee once they have received payment from the Department of State. The official award document from the Department of State will contain information on how the Selected Seller invoices the Buyer. The official award document from the Department of State will provide the delivery timeline information and the award date on the document is when the official delivery time clock begins. Sellers cannot: combine order shipments, perform drop shipments. A requisition number or credit card number MUST be identified with the shipment and All shipments MUST include the Packing List. For the line items designated as [Brand Name or Equal], the Buyer is allowing Sellers to submit bids for alternate products as long as the bid specification 'Brand Name or Equal' the requested specification. Sellers MUST enter exactly what they are bidding (including make, model, and description) into the blank description field in order for the bid to be considered. Award may NOT be based solely on pricing factors alone. Consideration may be given to non-price related factors to include delivery, history, urgency of need, as well as price. Award of bids will be evaluated by price, technical capability, delivery and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. TO HAVE A BID CONSIDERED FOR AWARD FOR BRAND NAME OR EQUAL & MEET OR EXCEED BUYS, ALL VENDORS MUST PROVIDE MANUFACTURER, PART # AND EXTENDED SPECIFICATIONS OF THE EXACT MODEL BEING PROPOSED FOR ALL LINE ITEMS. NO EXCEPTIONS. FAILURE TO PROVIDE THIS INFORMATION WILL RESULT IN A 'NON RESPONSIVE' BID AND REMOVAL FROM AWARD CONSIDERATION. The Government intends to make award to the responsive offeror that provides the Best Value to the Government based on Technical Acceptability, Price, Delivery Timeframe and Past Performance. Award will be made to the offeror quoting fair and reasonable prices who meet ALL required technical specifications and who comply with ALL solicitation requirements. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:Technical Compliance with Solicitation, Delivery and Warranty Information, Past Performance,and Price, Technical and past performance, when combined, are more important than price. The Government may increase the quantity of supplies called for in the Schedule at the unit price specified. The Contracting Officer may exercise the option by written notice to the Contractor within 90 Calendar Days of receiving final delivery. Delivery of the added items shall continue at the same rate as the like items called for under the contract, unless the parties otherwise agree
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/A-LM-AQM/A-LM-AQM/FY15-GC-355/listing.html)
- Place of Performance
- Address: Sterling, VA 20166
- Zip Code: 20166
- Zip Code: 20166
- Record
- SN03665118-W 20150313/150311235444-fc62525412dd6ddf01c709a6b1ac0d52 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |