SOLICITATION NOTICE
71 -- System Office Furniture Modification and Reconfiguration Southwest Admin Bldg 9001 - Additional Information
- Notice Date
- 3/18/2015
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337214
— Office Furniture (except Wood) Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, PK/PZ Tinker AFB, 3001 Staff Drive, Ste 1AG76A, Tinker AFB, Oklahoma, 73145-3015, United States
- ZIP Code
- 73145-3015
- Solicitation Number
- FA8101-15-Q-0014
- Archive Date
- 4/3/2015
- Point of Contact
- Ernest Harold Perkins, Phone: 405-739-4162
- E-Mail Address
-
ernest.perkins.3@us.af.mil
(ernest.perkins.3@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Combined synopsis/solicitation (see last page) Single Source Justification COMBINED SYNOPSIS/SOLICITATION IAW FAR 12.603 SOLICITATION NUMBER: FA8101-15-Q-0014 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quote (RFQ), for a firm fixed type contract. The solicitation document and incorporated provisions and clauses are those in effect through the most current Federal Acquisitions Circular (FAC 05-80 March 2, 2015). All responsible sources may submit a quotation in response to this solicitation, which shall be considered. A contract may be awarded resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and is most advantageous to the Government. The Air Force Sustainment Center (AFSC/PZIOB) at Tinker Air Force Base, Oklahoma, intends to award a single source, firm fixed price contract for the acquisition of item(s) listed below. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. The Government intends to select one contractor. However, the Government reserves the right to award no contract at all, depending on the quality of the proposals/quotes, prices submitted, and the availability of funds. Requirement Overview: •- System Office Furniture Modification and Reconfiguration Southwest Admin Bldg 9001 •- Revised Design drawings •- Install and Erect new reconfiguration Required Delivery Date (RDD): 2 weeks after date of contract (ADC) NOTE: offers exceeding RDD do not meet the terms and conditions of this solicitation Delivery Information: FOB Destination, Tinker AFB, OK NOTE: offers with FOB Origin do not meet the terms and conditions of this solicitation Inspection and Acceptance: Inspection and acceptance of the item will be performed at Tinker AFB, Oklahoma Warranty Type: Standard commercial warranty Competition Requirement: It is the Government's intention to award a single source contract to Haworth, Inc. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the Agency. NAICS Code: 337214 Size Standard: 500 Employees Other Pertinent Information: •· See attached single source justification form. •· Return attached solicitation form with all information blocks completed. See last page of document. Payment Information: Payments shall be made for items accepted by the Government that have been delivered to the delivery destination. NOTE: offers requiring advanced or progress payments do not meet the term and conditions of this solicitation. Required Registration by all Contractors: In order to do business with the government, it is mandatory per Federal Acquisition Regulation (FAR) 52.212-3, Offeror Representations and Certifications - Commercial Items, that all offerors must be registered with: •· System for Award Management (SAM) ( www.sam.gov ) NOTE: Contact the POC on the website for information and guidance regarding these registrations Applicable Clauses/Provisions (Federal Acquisition Regulation http://farsite.hill.af.mil/farsite.html): FAR 52.212-1, Instructions to Offerors - Commercial Items FAR 52.212-2, Evaluation - Commercial Items •- Reconfigure and modify the System Office Furniture installation project in the Southwest Admin area of Building 9001 •- Revision of the furniture design drawings •- Install based on new furniture configuration FAR 52.212-3, Offeror Representations and Certifications - Commercial Items FAR 52.212-4, Contract Terms and Conditions - Commercial Items FAR 52.212-5, Contract Terms and Conditions required to Implement Statutes or Executive Orders FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran - Representation and Certifications FAR 52.203-5, Covenant Against Contingent Fees FAR 52.203-6, Restrictions on Subcontractor Sales to the Government FAR 52.203-7, Anti-Kickback Procedures FAR 52.203-17, Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights FAR 52.222-17, Nondisplacement of Qualified Workers FAR 52.222-50, Combating Trafficking in Persons FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving FAR 52.225-13, Restrictions on Certain Foreign Purchases. FAR 52.232-1, Payments FAR 52.232-39, Unenforceabilityof Unauthorized Obligations FAR 52.233-3, Protest after Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.244-6, Subcontracts for Commercial Items FAR 52.233-2, SERVICE OF PROTEST (SEP 2006) •(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from Ernest H. Perkins, Jr. Procurement Analyst 7858 5th Street, STE 1 Tinker AFB, OK 73145-9106 (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. (End of provision) FAR 52.225-18, Place of Manufacture (MAR 2015) (a) Definitions. As used in this clause-- Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-- (1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ___ ) Outside the United States. (End of provision) DFARS 252.225-7001, Buy American Act DFARS 252.209-7992, REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW-FISCAL YEAR 2015 APPROPRIATIONS (DEVIATION 2015-OO0005) (DEC 2014) (a) In accordance with sections 744 and 745 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds made available by this or any other Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) TAFB 100-17, "TRUCK ENTRY GATE" NOTICE ***************************************************************************************** IMPORTANT DELIVERY INFORMATION ***************************************************************************************** Tinker Air Force Base has constructed a "Truck Entry Gate" (Gate 33), which is located at the corner of 59th Street and Air Depot Blvd (southwest corner of the base). The gate will be opened beginning 15 September 2004. Gate 33 shall be used for all deliveries by truck to this base. (Trucks will not be allowed to gain access through any other gate.) Since your firm's delivery on this order is affected, please advise your delivery carrier to use the new gate. This should minimize the impact of your delivery. DELIVERIES TO BUILDING 3001 (B / 3001) Be advised that delivery vehicles destined for B / 3001 are prohibited from using "Staff Drive". Delivery vehicles may make deliveries only in designated unloading areas. Since your firm's delivery may be affected, ensure that your delivery carrier receives proper instructions on delivery / unloading requirements for B / 3001. Unloading in designated unloading areas will minimize any inconvenience, and, attendant ramifications, which may accrue, to your delivery / delivery carrier for failure to adhere to this requirement. TAFB 500-11, Contractor ID Badge Requirements Contractors working on Tinker AFB shall comply with all procedures outlined in TAFBI 31-101, AFI 10-245 and TAFBP 31-101. OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 5.3, all contractors/contractor personnel will be assessed a charge of $50.00 for each badge lost, willfully damaged, or not surrendered to Pass and Registration. No charge will be made on a replacement required due to normal wear. Personnel will report to Accounting and Finance, Accounts Receivable Unit and a DD Form 1131, Cash Collection Voucher, will be prepared and presented to Pass and Registration prior to issuing a replacement identification. Identification will be surrendered to Security Forces personnel upon demand for the purpose of identification, investigation, abuse, misuse, or for any other reason necessary. Civilian and military retirees who conduct commercial business on base must obtain a badge through their place of employment. ALSO OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 7, all contractors/contractor personnel shall be subject to background checks as deemed necessary. Contract Line Items (CLINs): CLIN # Item Quantity Unit of Issue 0001 System Office Furniture Modification and Reconfiguration Southwest Admin Bldg 9001 Awarded under Contract - FA8101-14-P-0044 1 LOT Description: Reconfigure and modify the System Office Furniture installation project in the Southwest Admin area of Building 9001. IT IS THE GOVERNMENT'S INTENTION TO AWARD SOLE SOURCE TO HAWORTH, INC. ALL RESPONSIBLE SOURCES MAY SUBMIT A BID, PROPOSAL, OR QUOTATION WHICH SHALL BE CONSIDERED BY THE AGENCY. 0002 Revised Design drawings 1 EA Description: Revise furniture design drawings. IT IS THE GOVERNMENT'S INTENTION TO AWARD SOLE SOURCE TO HAWORTH, INC. ALL RESPONSIBLE SOURCES MAY SUBMIT A BID, PROPOSAL, OR QUOTATION WHICH SHALL BE CONSIDERED BY THE AGENCY. 0003 Install and Erect new reconfiguration 1 LOT Description: Install and erect new furniture configuration based on revised drawings. IT IS THE GOVERNMENT'S INTENTION TO AWARD SOLE SOURCE TO HAWORTH, INC. ALL RESPONSIBLE SOURCES MAY SUBMIT A BID, PROPOSAL, OR QUOTATION WHICH SHALL BE CONSIDERED BY THE AGENCY.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/FA8101-15-Q-0014/listing.html)
- Place of Performance
- Address: Building 9001, Southwestern Administrative Area, Tinker AFB, Oklahoma, 73145, United States
- Zip Code: 73145
- Zip Code: 73145
- Record
- SN03671312-W 20150320/150318234701-cc7ff825fb9d0a480a2474a79bd11766 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |