SOURCES SOUGHT
66 -- Picosecond Micromachining Laser System
- Notice Date
- 4/6/2015
- Notice Type
- Sources Sought
- NAICS
- 334419
— Other Electronic Component Manufacturing
- Contracting Office
- Department of the Navy, Office of Naval Research, Naval Research Laboratory/STENNIS, John C. Stennis Space Center, Building 1008, RM 217, Stennis Space Center, Mississippi, 39529-5004, United States
- ZIP Code
- 39529-5004
- Solicitation Number
- NRL-15-WR03
- Archive Date
- 5/6/2015
- Point of Contact
- Ryan Wheelock, Phone: 228-688-5434
- E-Mail Address
-
ryan.wheelock@nrlssc.navy.mil
(ryan.wheelock@nrlssc.navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This Request for Information (RFI) is for market research purposes only. The Naval Research Laboratory (NRL) is searching for potential sources that are capable of supplying a picosecond micromachining laser system in accordance with the below specifications: Picosecond Micromachining Laser System Specifications •Energy at 532nm (up to 3kHz): >0.6mJ (0.8mJ expected) •M2 <1.3 •Pulse width centered around 30ps +/- 5ps •Repetition Tates: single shot to 3kHz (up to 10kHz operational) •Turn-on Time < 15 min •Pulse Stability < 0.5% rms •Power supply and water chiller operating at 110VAC (single phase) supplied •3meter umbilical cable, right orientation •3meter chiller supply line •Clock synchronizer with <0.4ps timing jitter with a 1ms settling time after phase step, and RS-232 interface The intent of this RFI is to gauge industry interest, capabilities and relevant heritage experience in providing the required system given the attached specification. This is neither a Request for Proposals (RFP) nor Request for Quotes (RFQ). The Government will not reimburse any costs associated with the development and submission of materials in response to this request. There is no solicitation available at this time. However, should such a requirement materialize, no basis for claims against NRL shall arise as a result of a response to this RFI or NRL's use of such information as either part of our evaluation process or in developing specifications for any subsequent requirement. CONTRACTOR RESPONSE FORMAT NRL asks that interested parties, at a minimum, supply the following information: Contact Information a) Name of Company and Point of Contact (POC) b) Telephone Number, address and e-mail address of POC c) Business size and number of employees d) DUNS Number and Cage Code e) Associated NAICS and FSC Codes Technical Information Information to clearly document the capability of each vendors' equipment that will meet or exceed all of the minimum requirements set forth by the Government above. Pricing and Schedule Information NRL is requesting interested parties to provide estimates of the price and delivery schedule associated with the desired system. Past Performance Information Please provide in the response a list of Navy, DoD, or Federal contracts or delivery orders supported during the past 36 months with a brief description of the equipment provided per each contract. Only list contracts for equipment similar to that required under the above specification. SUBMISSION INFORMATION Responses shall be e-mailed to Ryan Wheelock at ryan.wheelock@nrlssc.navy.mil with "NRL-15-WR03" in the subject of the email. Any questions relating to this notice, including any comments on the specifications shall be sent via email to Ryan Wheelock at ryan.wheelock@nrlssc.navy.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/ONR/Code3235/NRL-15-WR03/listing.html)
- Place of Performance
- Address: Naval Research Laboratory, Washington, District of Columbia, 20375, United States
- Zip Code: 20375
- Zip Code: 20375
- Record
- SN03690408-W 20150408/150406234835-9f87996ec963cabb802c3d403b8c4705 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |