MODIFICATION
10 -- Manufacture of Mk 419 Mod 1 Multi-Function Fuzes
- Notice Date
- 4/20/2015
- Notice Type
- Modification/Amendment
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- ACC - New Jersey, Center for Contracting and Commerce, Building 10 Phipps RD, Picatinny Arsenal, NJ 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN15X8425
- Response Due
- 5/11/2015
- Archive Date
- 6/19/2015
- Point of Contact
- William Labance, 973-724-6673
- E-Mail Address
-
ACC - New Jersey
(william.j.labance.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Description: The US Army Contracting Command - New Jersey (ACC-NJ), on behalf of the Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD), Picatinny Detachment and the NSWC IHEODTD, is currently seeking potential sources capable of manufacturing a quantity of 20,000-50,000 Mk 419 Mod 1 Multi-Function Fuzes, over a period of 5 years, for use in Navy large caliber ammunition. The primary use for the Fuze will be as the detonation initiator for the 5-Inch Mk 187 Mod 0 High Explosive Multi-Function Projectile. The Fuze contains the Mk 60 Mechanical Delay Arming Assembly, PBXN-5 Booster Pellet, and shall be compatible with an Mk 34 Fuze Setter. The Fuze shall operate in 5 modes: Height of Burst, Air, Autonomous, Point Detonating, and Electric Time Mode, and shall meet the requirements of the top level drawing, 53711-8347015-1, in addition to all related specifications, component drawings, and assembly drawings. All documents are marked for Distribution D. Distribution Statement D means distribution authorized to the Department of Defense and U.S. DOD contractors only. The detailed specifications and applicable drawings will be made available through the Procuring Contracting Officer upon request, and after submission of a valid DD2345, a signed Non-Disclosure Agreement (NDA), and AMSTA-AR Form 1350 Technical Data Request Questionnaire. In addition, each company shall include the following information as a part of their request for detailed specifications: Company Name; Address: Company Cage Number: DUNS Number: Company Size: Point of Contact: Technical Point of Contact: Submission Information: As prescribed in DFARS 252.204-7004, interested parties must be registered with System for Award Management (SAM) under the NAICS 334513. Representations and certifications must also be on record. These registrations can be done through the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM/. The following information is required to register in SAM: DUNS Number; Tax Identification Number (TIN) and Taxpayers Name; Statistical Information about your business; and Electronic Funds Transfer (EFT) Information. In responding to this Sources Sought Notice, respondents should provide the following information in the English language via e-mail only: - A synopsis of the company's technical capability to manufacture Mk 419 Mod 1 Multi-Function Fuzes in accordance with the above requirements. - A description of the company's facilities, personnel and past experience as it relates to the requested Mk 419 Mod 1 Multi-Function Fuzes or similar items. - A description of the respondent's production rate capabilities, including maximum production rate attainable and minimum sustaining rate - A description of the respondent's environmental and ballistic test facilities capable of supporting typical ammunition First Article Lot Acceptance Tests - A description of the respondent's quality system to include any relevant International Organization of Standards (ISO) qualifications. - Company size (please identify as either Large, Foreign, Small, Small Disadvantaged, 8(a), Woman-Owned Small Business, Historically Underutilized Business Zone concern, Veteran-Owned Small Business, or Service-Disabled Small Business) - Information regarding the commerciality of the item, i.e. how the item may or may not meet the definition of a Commercial item found at FAR 2.101 All responsible interested sources shall also provide the organization name, address, point of contact, phone number, fax number, e-mail address, taxpayer identification number, DUNS number, and CAGE Code. Interested sources are encouraged to submit their capabilities/qualification data with regard to the above, NO LATER THAN 30 days from the date of this notice (COB 1600 Eastern Time on 11 May 2015). The Government will accept written questions via email only; telephone inquiries will not be accepted. Submissions and questions should be directed to the following point of contact: US Army Contracting Command, Attn: William Labance ACC-NJ-MA, ACC - New Jersey, Building 10, Phipps Rd. Picatinny Arsenal, NJ 07806-5000, email william.j.labance.civ@mail.mil. Please note that this is a Sources Sought Notice only. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. This notice neither constitutes a Request for Proposal or Quotation, nor does it restrict the Government from an ultimate acquisition approach. This notice should not be construed as a commitment by the Government for any purpose. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this notice. The U.S. Government is not obligated to notify respondents of the results of this notice. No award will be made as a result of this Sources Sought Notice. Please be advised that the Government will not pay for any information submitted under this announcement. Large files need to be compressed using WinZip (http://www.winzip.com). This market survey is for information and planning purposes only, does not constitute a solicitation, and is not to be construed as a commitment by the Government. This is not a solicitation. If a formal solicitation is generated at a later date, a pre-solicitation notice will be published. Not responding to this notice does not preclude participation in any future RFP, if any is issued. If a RFP is issued, it will be synopsized on the Federal Business Opportunities (FedBizOpps) website. It is the responsibility of the potential offerors to monitor these websites for additional information pertaining to this requirement. The Government is not obligated to notify respondents of the results of this survey.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/450fa90d7222a2dab43dd0eea4495f29)
- Place of Performance
- Address: ACC - New Jersey Center for Contracting and Commerce, Building 10 Phipps RD Picatinny Arsenal NJ
- Zip Code: 07806-5000
- Zip Code: 07806-5000
- Record
- SN03704696-W 20150422/150420235308-450fa90d7222a2dab43dd0eea4495f29 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |