MODIFICATION
49 -- P-8A Peculiar Support Equipment
- Notice Date
- 4/27/2015
- Notice Type
- Modification/Amendment
- Contracting Office
- Highway 547, Lakehurst, NJ 08733
- ZIP Code
- 08733
- Solicitation Number
- N68335-15-R-0005
- Response Due
- 1/9/2015
- Archive Date
- 7/8/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N68335-15-R-0005 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-78. The associated North American Industrial Classification System (NAICS) code for this procurement is 336413 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-01-09 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Lakehurst, NJ 08733 The NAWC-AD Lakehurst requires the following items, Exact Match Only, to the following: LI 001: Control Wheel Straight Edge P/N SE27-0001, 2, EA; LI 002: O-Ring Installation Tool P/N ST848, 2, EA; LI 003: Pin, Alignment, Bolt Installation P/N ST9501B, 2, EA; LI 004: Pitot Static Cover Inst/Rem Tool P/N A10002-7, 3, EA; LI 005: Switch, Proximity P/N A27092-106, 4, EA; LI 006: Lift Fixture-Engine Accessory P/N A71015-108, 4, EA; LI 007: Lock Equipment, T/R P/N B78009-26, 2, EA; LI 008: Wing Jack Adapter P/N C07002-1, 3, EA; LI 009: Fitting Assy Aircraft Tiedown P/N C07005-1, 1, EA; LI 010: Adapter Assembly, Cable Breakout P/N C22005-25, 2, EA; LI 011: Set, Lock Outboard Ground Spoile P/N C27001-42, 6, EA; LI 012: Set, Clamp Trailing Edge Flap Torq P/N C27022-1, 4, EA; LI 013: Pin, Lockout Depressurization Valve P/N C27038-6, 8, EA; LI 014: Set, Lock Flight Spoiler Actuator P/N C27047-41, 4, EA; LI 015: Set, Tool MLG & NLG Wheel Ret Nut P/N C32012-12, 8, EA; LI 016: Set, Thread Protector MLG P/N C32022-17, 8, EA; LI 017: Set, Thread Protector NLG P/N C32022-20, 8, EA; LI 018: Pin, Inserter and Remover P/N C32035-1, 1, EA; LI 019: Test Equipment Engine Bleed Air Systems P/N C36001-64, 4, EA; LI 020: Hold Open Equipment, T/R Cowl P/N C78019-15, 4, EA; LI 021: Hold Open Equipment, 65 DEG T/T CO P/N C78021-1, 2, EA; LI 022: Wrench Assy-Door Handle Mechan. P/N F70038, 2, EA; LI 023: Wrench Assy, Pinion Gear P/N F71267, 2, EA; LI 024: Protractor Mount used with Multipurpose Protractor P/N F72790, 2, EA; LI 025: Regulator, Air Pressure Elev Feel P/N F72928-58, 4, EA; LI 026: Door Lube Set P/N F72942-1, 1, EA; LI 027: Lock, Ground TE Flap Bypass Valve P/N F80049-46, 4, EA; LI 028: Assembly, Trammel Bar Stab Trim A P/N F80055-1, 2, EA; LI 029: Fixture Test Fuel Surge Pressure P/N F80166-1, 2, EA; LI 030: Load Positioner P/N J20002-59, 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 90 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Early delivery at no additional charge to the Government is acceptable. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34, 52.246-2, 52.242-15, 52.247-34, 252.225-7048,252.225-7015. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. This procurement is a limited competition between authorized Boeing Small Business Manufacturers. Only small businesses authorized by Boeing to manufacture parts listed above will be considered for award. PLEASE INCLUDE SUBSTANTIATING DOCUMENTATION THAT VALIDATES YOUR COMPANY AS AN AUTHORIZED MANUFACTURER OF THE REQUIRED EQUIPMENT. Items to be delivered shall be packaged in accordance with best commercial practices. Items with a unit cost of $5,000 or more shall comply with DFARS Clause 252.211-7003 Item Identification and Valuation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N68335-15-R-0005/listing.html)
- Place of Performance
- Address: Lakehurst, NJ 08733
- Zip Code: 08733
- Zip Code: 08733
- Record
- SN03712020-W 20150429/150427235118-9018dcfc30becbdd4278937bb6f9950d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |