DOCUMENT
34 -- One (1) Large Swing, Heavy-Duty, Manual Lathe - Attachment
- Notice Date
- 4/30/2015
- Notice Type
- Attachment
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- N68836 NAVSUP Fleet Logistics Center Jacksonville Naval Air Station Building 110, 3rd Floor 110 Yorktown Rd Jacksonville, FL
- Solicitation Number
- N6883615LATHE
- Response Due
- 5/7/2015
- Archive Date
- 5/22/2015
- Point of Contact
- Javier Aponte
- E-Mail Address
-
.aponte@navy.mil
- Small Business Set-Aside
- N/A
- Description
- MARKET RESEARCH/REQUEST FOR INFORMATION (RFI) “ NO SOLICITATION DOCUMENT EXISTS Federal Supply Code (FSC) 34 “ Metalworking Machinery The NAVSUP Fleet Logistics Center in Jacksonville (FLCJ) is conducting a market survey to determine the availability of vendors capable of providing one (1) Large Swing, Heavy-Duty, Manual Lathe, in support of the Trident Refit Facility (TRF). The NAICS Code for this requirement is 333515, Cutting Tool and Machine Tool Accessory Manufacturing, and the Size Standard is 500. Interested vendors are requested to submit a capability statement outlining their ability to meet or exceed this requirement no later than 1:00PM (Eastern Standard Time), Thursday, 7 May 2015, to Javier Aponte at javier.aponte@navy.mil stating the following information: (1) SSN Number N6883615LATHE; (2) Company name, address, POC name, phone number, fax number and email; (3) Contractor (CAGE Code); (4) Size of business - Large Business, Small Business, Small Disadvantage, 8(a), HubZone, Woman-owned and/or Veteran-owned; (5) If the Items can be solicited from a General Services Administration (GSA) schedule contract vehicle or Open market; (6) Salient characteristics of the equipment being proposed which demonstrate the equivalency to the Large Swing Heavy-Duty, Manual Lathe requested by the Government, in accordance with the attached General Requirements document; and (7) Contractor (Manufacturer or Distributer). The Government will use the result of this announcement to determine whether the acquisition of the above described requirement should be solicited as a Small Business Set-Aside, or whether Full and Open Competition procedures will be utilized. Submissions are Not-To Exceed (NTE) 10 Standard typewritten pages. All technical questions and inquiries may be submitted within the response. DISCLAIMER: THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL AND PLANNING PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR THE PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT NOTICE IS STRICTLY VOLUNTARY.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/6166865e7e15a2afd9cf3f8fb6cc95de)
- Document(s)
- Attachment
- File Name: N6883615LATHE_SOW_-_Clausing_Lathe_-_MB50200_Rev_3.doc (https://www.neco.navy.mil/synopsis_file/N6883615LATHE_SOW_-_Clausing_Lathe_-_MB50200_Rev_3.doc)
- Link: https://www.neco.navy.mil/synopsis_file/N6883615LATHE_SOW_-_Clausing_Lathe_-_MB50200_Rev_3.doc
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: N6883615LATHE_SOW_-_Clausing_Lathe_-_MB50200_Rev_3.doc (https://www.neco.navy.mil/synopsis_file/N6883615LATHE_SOW_-_Clausing_Lathe_-_MB50200_Rev_3.doc)
- Record
- SN03715989-W 20150502/150430235524-6166865e7e15a2afd9cf3f8fb6cc95de (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |