Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MAY 10, 2015 FBO #4915
SOLICITATION NOTICE

71 -- CSMS Work Benches - CSMS Work Benches

Notice Date

5/8/2015
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

337214 — Office Furniture (except Wood) Manufacturing
 

Contracting Office

Department of the Army, National Guard Bureau, USPFO for Maryland, State Military Reservation, 301 Old Bay Lane, Havre de Grace, Maryland, 21078-4094
 

ZIP Code

21078-4094
 

Solicitation Number

W912K6-15-Q-1032
 

Archive Date

6/4/2015
 

Point of Contact

ronald govans, Phone: 4109428424, Analiza Harry, Phone: 4109428475
 

E-Mail Address

ronald.d.govans2.mil@mail.mil, analiza.i.harry.mil@mail.mil
(ronald.d.govans2.mil@mail.mil, analiza.i.harry.mil@mail.mil)
 

Small Business Set-Aside

N/A
 

Description

CSMS Work Benches Solicitation: There will be a Site Visit General Information Document Type: Combine Synopsis/Solicitation Solicitation Number: W912K6-15-Q-1032 Posted Date: 06 May 2015 Site Visit: 14 May 2015 10:30 A.M Original Response Date: 20 May 2015 11:00 A.M Classification Code: 71 - Furniture NAICS Code: 337214 Description This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 16.505, "Ordering". Requirements apply when procuring items peculiar to one manufacturer, Brand Name: "Stanley Vidmar or equal too". This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quotation (RFQ). This procurement is a small business set-aside. The NAICS code is 337214, Office Furniture (Except Wood) Manufacturing and the small business size standard is 500 Employees. The Maryland Army National Guard (MDARNG) has a requirement for the following items: 1. Line Item0001- Armory Van Storage MK19/M4 QTY a. Housing-DW,0200 (60"W X 27 3/4" D X 37"H each with (1) b. Shock Bar-901,200, RH (1) c. Drawer- DW, 65 (1) d. Lock in-out drawer feat-ST, RH (1) e. WPN CRDL-ST-UNIV-8 MAX (1) f. Foam Insert- DW (1) g. Drawer- DW (1) h. Drawer-DW, 80 (1) i. Lock in-out Drawer Feat- ST,RH (1) j. DWR INSRT-DW-MK19 MGUN-QTY 2 (1) k. Foam Insert- DW (1) l. Drawer- DW, 80 (1) m. Lock In-Out Drawer FEAT-ST, RH (1) n. WPN PARTN-ST-PS90-P65-18 MAX (3) o. Foam insert- DW (1) p. Hinge Lock Bar-200-1, LH (1) q. No Pallet feet feature- DW (1) 2. Line Item0002 Army Van Storage MK16/MK2 QTY a. Housing-XW.0155 (45"W X 27 3/4" D X 30"H each with (1) b. Hinge Lock Bar-200-1, LH (1) c. Shock Bar -901, 155, RH (1) d. Drawer- XW, 70 (1) e. Lock In-Out Drawer Feat- ST,RH (1) f. WPN CRDL-ST-UNIV-8-MAX (1) g. Foam Insert- XW.85 (1) h. Lock In-Out Drawer Feat- ST,RH (1) i. DWR INS-DW-M2 MGUN50 CAL- QTY 4 (1) j. HSG,VERT WPN STOR, XL, 54"H (1) k. BRL Transport Supt, VWS, (1) (1) l. UPR SPT W/J-HK for BRL BAG-VWS (1) m. Gun Kit, VMS, XL M240 (6) (1) n. Rubber Shock Cord-19 inches (6) o. Rubber Shock Cord-24 inches (6) 3. Line Item0003 Armory Van Storage 9MM QTY a. HOUSING - ST,0200 (30"W X 27 3/4"D X 37"H) EACH (1) b. SHOCK BAR - 901,200,RH (1) c. 30 DRAWER WITH LD VP2 (1) d. LOCK IN-OUT DRAWER FEAT-ST,RH (1) e. FOAM INSERT - STD (1) f. 40 DRAWER WITH LD VP3 (1) g. LOCK IN-OUT DRAWER FEAT-ST,RH (1) h. FOAM INSERT - STD (1) i. DRAWER - ST,60 (1) j. LOCK IN-OUT DRAWER FEAT-ST,RH (1) k. FOAM INSERT - STD (1) l. DRAWER - ST,70 (1) m. STRAIGHT DIVIDER - 70-32 (1) n. PISTOL DWR INS-SV65-QTY 44 (1) o. LOCK IN-OUT DRAWER FEAT-ST,RH (1) p. FOAM INSERT - STD (1) q. HINGE LOCK BAR - 200-1,LH (1) 4. Line Item0004 (2) Electronics Van Storage QTY a. 0175 HOUSING WITH 6 DRAWERS, DRAWER ACCESSORIES & LOCKING DEVICE (2) b. LOCK IN-OUT DRAWER FEAT-ST,RH (12) c. SHELF DOOR CAB - XW,0175 (45"W X 27 3/4"D X 33"H) (1) d. HINGED LOCK BAR - 175-1,RH (1) e. SHELF - XW,400# CAP (1) f. LIP FEATURE - SHELF,XW (2) g. BOOKCASE - 30 X 14 X 33 (1) h. BOOKCASE DOOR - DBL, STL, HING (1) i. HLB - BKA33 - DBL STL HINGE DR (1) j. SV0175 HOUSING WITH 3 DRAWERS, DRAWER ACCESSORIES & LOCKING DEVICE (1) k. LOCK IN-OUT DRAWER FEAT-ST,RH (3) l. BENCH LEG (1) m. SG WORK SUR W/LGS 90X30 SQ FRT (1) n. SG WORK SUR W/LGS,72X30SQ FRT (2) o. 0200 HOUSING WITH 5 DRAWERS, DRAWER ACCESSORIES & LOCKING DEVICE (1) p. LOCK IN-OUT DRAWER FEAT-ST,RH (5) q. NO PALLET FEET FEATURE - STD (1) r. SHELF DOOR CAB - SV,0200,RH (1) s. HINGE LOCK BAR - 200-1,LH (1) t. SHELF - SV, 400 LB CAP (2) u. NO PALLET FEET FEATURE - SV (1) v. HARDWOOD TOP-60 X 28 X 1 ¾ (1) w. WHITE ESD SQUARE EDGE TOP (1) 5. Line Item0005 ELECTRONICS SHOP END TO END BENCHES ESD10V QTY a. HOUSING SV,175(22 1/2"W X 27 3/4"D X 33"H) EACH (1) b. SV25 DRAWER WITH LD SV48 (1) c. SV35 DRAWER WITH LD SV78 (1) d. SV40 DRAWER WITH LD SV716 (1) e. DRAWER - SV,75 (1) f. PENDAFLEX SEPARATOR - SV (1) g. 0175 HOUSING WITH 5 DRAWERS, DRAWER ACCESSORIES (1) h. SG WORK SUR W/LGS 72X36 R FRT (2) i. BACK STOP - 72 X 3 (2) j. FLUORESCENT LIGHT (2) k. WSS-72X18X20, ST DIS, PWR, 15A (2) l. CHAIR DELUXE ESD (2) m. 5 EA 2IN DIA/BARREL HD FLR/ESD (2) 6. Line Item0006 ELECTRONICS SHOP BACK TO BACK 7' BENCHES ESD10V QTY a. HOUSING - ST,0175 (30"W X 27 3/4"D X 33"H) EACH (1) b. 25 DRAWER WITH LD VP2 (1) c. 35 DRAWER WITH LD 66 (1) d. 40 DRAWER WITH LD 88 (1) e. DRAWER - ST,75 (1) f. PENDAFLEX SEPARATOR - ST (1) g. SG WORK SUR W/LGS 84X36 R FRT (2) h. BENCH LEG (2) i. STRINGER - 42,BL TO CAB (2) j. FLUORESCENT LIGHT (2) k. WSS-84X18X20,ST DIS,PWR, 15A (2) l. CHAIR DELUXE ESD (2) m. 5 EA 2IN DIA/BARREL HD FLR/ESD (2) 7. Line Item0007 ELECTRONICS SHOP OVERFLOW BENCH ESD10V QTY a. HOUSING - ST,0175 (30"W X 27 3/4"D X 33"H) (1) b. 25 DRAWER WITH LD VP2 (1) c. 35 DRAWER WITH LD 66 (1) d. 40 DRAWER WITH LD 88 (1) e. DRAWER - ST,75 (1) f. PENDAFLEX SEPARATOR - ST (1) g. SG WORK SUR W/LGS 72X36 R FRT (1) h. BENCH LEG (1) i. BACK STOP - 72 X 3 (1) j. FLUORESCENT LIGHT (1) k. WSS-72X18X20, ST DIS, PWR, 15A (1) l. CHAIR DELUXE ESD (1) m. EA 2IN DIA/BARREL HD FLR/ESD (1) 8. Line Item0008 ELECTRONICS SHOP COMPONENT STORAGE ESD10V QTY a. SG HOUSING - ST,0340 (1) b. 20 DRAWER WITH LD BNVP1632 (4) c. 30 DRAWER WITH LD 66 (4) d. 40 DRAWER WITH LD 88 (2) e. 60 DRAWER WITH LD 1010 (2) f. 0340 HOUSING WITH 9 DRAWERS, DRAWER (1) 9. Line Item0009 TOP CABINET QTY a. OVHD STORAGE CAB-DW 0135 W/BP (1) b. OS CAB DOOR ASSY - DW, 135 (1) c. STACK BOTTOM FEATURE - DW (1) d. STOOL SIT-STAND (1) Additional Instruction: Must meet standards 1. Anti static standards listed below: • Point-to-point resistance of greater than or equal to 1 X 106 less than or equal to 1 x 109 ohms. • Point to ground resistance of greater than or equal to X 106 ohms or less than or equal to 1 x 109 ohms. • *The resistivity ranges (as determined by and conforming to ESD Association Standard 4.1 and Advisory 53.1 test methods) provide static dissipation as well as reliable protection against electrostatic overstress (EOS) on all internal and external surfaces. • A ground cord is provided to connect all products to a true earth ground. • *Workstations with a 1 3/4" thick laminate top with a full radius front edge and a static dissipative surface which conforms to NEMA LD-3-1991 Standards for PF-42 grade laminated. • *Worksurfaces need an installed common point grounding system. • All electrified workstations need to provide a ground fault circuit interrupt and a circuit breaker to insure personnel and component protection. 2. Military Anti-static Standards Compliance Requirements: • HDBK-263A Handbook for Protection of Electrical & Electronic Parts. • MIL-STD-1686A ESD Control Program for Protection of Electronic Parts. • MIL-HDBK-773 Handbook on Electrostatic Discharge Protective Packaging. • MIL-STD-W-87893A Workstation, Electrostatic Discharge (ESD) Control. • TechOrder (W) 00-25-234 Section VII Air Force ESD Guideline. • MIL-STD-129 Marking for Shipment and Storage. • Air Force Material Command Regulation AFMCR65-8. 3. Modular Drawer and Cabinet Parameters: • Cabinet housings shall be welded steel construction with an integral fork truck pickup base and base covers. Cabinet base dimensions shall be in widths of 30", 45", or 60" with optional depths of 21 3/8" or 27 ¾" to satisfy space requirements. Cabinet heights shall reflect their intended uses and range from 27" to 59". • Cabinet housings shall have "knockout" holes in both sides and the back for side to side and back to back connection, as well as knockouts in the top and holes in the feet or base for cabinet stacking. Housings should include integral pallet feet unless specified differently for mobile applications. • Manufacturers shall offer a minimum of eleven (11) standard drawer depths ranging from 2" to 13" (usable). • All standard size drawers shall have a bottom surface of 650 square inches (25 1/2" x 25 1/2") with 630 square inches (25 1/8" x 25 1/8") of clear usable storage space for 30" wide x 27 ¾"deep housings. Manufacturers offering drawer cabinets with smaller dimensions shall provide additional drawers and housings proportional to the ratio of their usable storage area. • All drawers shall have a full extension suspension system with minimum load capacity of 400#. All manufacturers shall provide documented evidence (from an independent testing laboratory) that the drawer suspension system has been tested under full rated load conditions and has experienced an average of 3,000 cycles without failure. A cycle shall be defined as full extension and return with a maximum required (pull) force of 50#. • All drawers shall have an aluminum extruded drawer pull which extends at least 75% of the width of the drawer. Drawer pulls shall have provisions to accept 1 1/4" tall paper labels and clear plastic "shields". Each drawer pull shall have plastic end caps which are factory installed and mechanically locked to the drawer pull to prevent accidental removal and personnel injury. • All drawer interiors, i.e. partitions, dividers, plastic bins, etc., shall be factory installed in their final orientation and/or configuration. Partitions shall be firmly secured with at least (2) screws. • To achieve maximum worker productivity, cabinets must permit opening more than one drawer at a time. Any system which does not allow more than one drawer to be opened will not be considered. • Security - when cabinet locking systems are specified, the locking system shall utilize a high security lock and key, capable of master keying, with a minimum of seven (7) levels of master/sub master keying providing more than 6,000 discrete lock combinations. • Standard size cabinet shelves shall be (nominally) 27 1/2" x 25 1/2" offering 4.8 square feet of usable storage space for 30" wide x 27 ¾" deep housings. Manufacturers providing smaller units shall include additional housings and shelves proportional to the ratio of usable shelf storage area. • Cabinet shelves (and their support members) shall withstand a 400# evenly distributed load without failure. • Manufacturer shall equally warranty cabinets used in both stationary and mobile applications. • Cabinets designated to store weapons will conform to requirements in AR 190-11 para 4 Include all associated freight/delivery charges to FOB Destination, (Site Visit) USPF&O MD, SSMO-CSMS, 303 Old Bay Lane Havre De Grace MD, 21078 Federal Acquisition Regulation (FAR) contract clause 52.211-6, "Brand Name or Equal" applies. Brand names referenced are used only to describe a standard quality of product that is acceptable. If quoting other than brand name, the contractor should include any descriptive data, illustrations, specifications, and/or drawings of the product being quoted. "Stanley Vidmar or equal too". Defense Federal Acquisition Regulation Supplement (DFARS) contract clause 252.225-7035, "Buy American - Free Trade Agreements - Balance of Payments" applies. The offeror must certify their product meets these requirements. The MDARNG intends to award a "single" firm fixed price contract. Partial quotations will not be considered. FAR provision at 52.212-1, Instructions to Offerors-Commercial Item, applies to this acquisition. Award will be made on the basis of lowest-price technically acceptable. Provision for Evaluation: Award will be made to the responsible contractor (See FAR Part 9) whose quote represents the lowest overall price while meeting the technical requirements. In accordance with FAR Subpart 13.106-1, the Government will consider the following for award in no particular order: Lowest Priced, Technically Acceptable. The Government intends to evaluate quotes and make award without discussions with offerors (except clarifications as described in FAR 15.306(a)). The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. Prospective contractors must be registered in the System for Award Management (SAM) prior to award of a government contract. All quotations must be received no later than 11:00 AM., Eastern Time, 20 May 2015. Point of Contact All quotes must be turned in by May 20, 2015 by 11:00 am USPF&O Contracting Division ng.md.mdarng.list.uspfo-arpc@mail.mil Contracting Office Address USP&FO For Maryland, Purchasing & Contracting Division, 301 Old Bay Lane, State Military Reservation, Havre de Grace, Maryland 21078-4094.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA18/W912K6-15-Q-1032/listing.html)
 

Place of Performance

Address: USPF&O MD, SSMO-CSMS, 303 Old Bay Lane Havre De Grace MD, 21078, United States

Zip Code: 21078
 

Record

SN03725827-W 20150510/150508235510-bcf364a8213ac8886b97fd78fb09fccd (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |