SOLICITATION NOTICE
16 -- Thin Line Pressure Transducer - Sole Source Justification
- Notice Date
- 5/18/2015
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Air Combat Command, 49 CONS, 490 First Street, Suite 2160, Building 29, Holloman AFB, New Mexico, 88330-7908, United States
- ZIP Code
- 88330-7908
- Solicitation Number
- F2ETGT5110A101
- Archive Date
- 6/3/2015
- Point of Contact
- Kelly Mackenzie Lowe, Phone: 575-572-7155, Garriet R. Canteen, Phone: 5755722203
- E-Mail Address
-
kelly.lowe@us.af.mil, garriet.canteen@us.af.mil
(kelly.lowe@us.af.mil, garriet.canteen@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Sole Source Justification This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation F2ETGT5110A101 is a Request For Quotation (RFQ). This announcement will be issued as a combined synopsis/solicitation. This requirement is a set aside for Total Small Business. The anticipated award will be a Firm Fixed Price Contract, the award will be made based on the lowest price technically acceptable. The solicitation shall incorporate provisions and clauses that are in effect through Federal Acquisition Circular FAC 2005-82 May 07, 2015. The North American Industry Classification System (NAICS) code is 336413. The SB size standard for this code is 1,000 employees. CLIN 0001- Thin Line Pressure Transducer sealed gage 25 psi. to include shipping in accordance with the specs below. Qty 5 Each : Wiring Color Designation: Red = + input Black = - input Green = + output White = - output Input Specs: Pressure Range = 1.7 - 25 Operational Mode = Sealed gage Over Pressure = 2 times rated pressure Burst Pressure = 3 times rated pressure Pressure Media = All nonconductive, noncorrosive liquids or gases Rated Electrical Excitation = 10 VDC Maximum Electrical Excitation = 12 VDC Input Impedance = 1000 Ohms (Min) Output Specs: Output Impedance = 1000 Ohms (Nom) Full Scale Output (FSO) = 100 mV (Nom) Residual Unblance = plus or minus 5 mV (Typ) Combined Non-Linearity, Hysteresis and Repeatability = plus or minus 0.1% FSO BFSL (Typ), plus or minus 0.5% FSO (Max) Resolution = Infinitesimal Natural Frequency of Sensor without Screen (KHz) (Typ) = 240 Aceleration Sensitivity % FS/g Perpendicular =.0005 Insulation Resistance = 100 Megohm Min @ 50 VDC Environmental Specs: Operating Temperature Range = -65 degrees F to + 250 degrees F (-55 Degrees C to +120 degrees C) Compensated Temperature Range = +80 degrees F to +180 degrees F (+25 Degrees C to +80 degrees C) Any 100 degree F Range within the Operating Range on Request Thermal Zero Shift = plus or minus 1% FS/100 degrees F (Typ) Thermal Sensitivity Shift = plus or minus 1%/100 degrees F (Typ) Linear Vibration = 10-2,000 Hz Sine, 100g. (Max) Mechanical Shock = 20 g half Sine Wave 11 msec. Duration Physical Specs: Electrical Connection = 4 Conductor 32 AWG Ribbon Cable 36" long Weight =.2 Grams (Nom) Excluding Cable Pressure Sensing Principle = Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon QTY: 5 EACH Manufacturer: Kulite Semiconductor Products, Inc. All items shall be delivered FOB Destination to Holloman AFB, NM 88330. PROVISIONS/CLAUSES: This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-82 May 07, 2015. The below provisions and clauses may be obtained via internet at http://farsite.hill.af.mil. The following FAR provisions and clauses are applicable to this solicitation: All items shall be delivered FOB Destination to Holloman AFB, NM 88330. Provision at FAR 52.212-1, Instruction to Offerors Commercial Items (JUL 2013) applies to this acquisition. The following addenda is provided to this provision: Request for Quotation should be submitted and shall contain the following information: Solicitation Number; Time Specified for receipt of offers; Name; Address; Telephone Number of Offeror; Terms of the expressed warranty; Price, Payment terms, Any discount terms, F.O.B. destination, Expected Delivery Date, CAGE code, DUNS number, Tax ID number and acknowledgement of all solicitation amendments. Quotes must indicate quantity, unit price and total amount. Offerors that fail to furnish the required information, or reject the terms and conditions of the solicitation may be excluded from consideration. FAR 52.204-16, Commercial and Government Entity Code Reporting; FAR 52.204-18, Commercial and Government Entity Code Maintenance; FAR 52.212-3 Offerors Representations and Certifications-Commercial Items (AUG 2013); FAR 52.212-4 Contract terms and conditions-Commercial Items (JUL 2013); FAR 52.212-5 (Dev) Contract terms and Conditions required to implement statutes or executive orders-Commercial Items (JAN 2013); FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors; FAR 52.237-2, Protection of Government Buildings, Equipment, and Vegetation; DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; DFARS 252.203-7003, Agency Office of the Inspector General; DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials; DFARS 252.204-7011, Alternative Line Item Structure; DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information; DFARS 252.204-7011, Alternative Line Item Structure; DFARS 252.211-7003, Item Unique Identification and Valuation, Small Business Subcontracting Plan (DoD Contracts); DFARS 252.225-7000, Buy American-Balance of Payments Program Certificate; DFARS 252.225-7001, Buy American and Balance of Payments Program; DFARS 252.225-7002 Qualifying Country Sources as Subcontractors; DFARS 252.232-7003, Electronic Submission of Payment Request and Receiving Reports; DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions; DFARS 252.232-7010, Levies on Contract Payments; DFARS 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel; DFARS 252.244-7000, Subcontracts for Commercial Items; AFFARS 5352.201-9101 Ombudsman. DFARS 252.232-7006, WAWF Payment Instructions a) Definitions. As used in this clause- "Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization. "Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). "Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/ (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). _______________Invoice and Receiving Report (Combo) ________________ (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. ____________N/A________________________________________________ (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC F87700 Issue By DoDAAC FA4801 Admin DoDAAC FA4801 Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. Receiver/COR: N/A Buyer: Kelly.lowe@us.af.mil Contracting Officer: Garriet.Canteen@us.af.mil Additional Contact: Samantha.DeLucia@us.af.mil (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. See Buyer Above__ (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) Points of Contact Contract Administrator: Kelly Lowe, SrA, Phone: (575) 572-7155, FAX: 575-572-7333, e-mail kelly.lowe@us.af.mil Contracting officer: Garriet Canteen, TSgt, USAF, Phone: 575-572-2203, FAX: (575) 572-7333, e-mail Garriet.Canteen@us.af.mil IMPORTANT NOTICES: 1) RFQ submission must be in accordance with solicitation; 2) Offerors must be registered in the System for Award Management to be eligible for award (Ref. DFARS 252.204-7004, Required Central Contractor Registration); 3) All Amendments, if applicable, must be acknowledged; 4) Questions concerning this notice should be submitted to the Points of contact as indicated in this announcement. 5) Facsimile and email offers will be accepted. Questions in regards to this solicitation are due no later than 1200 (12:00 p.m.) Mountain Standard Time by 19 May 2015. Response Time- Request for Quotation will be accepted at the 49th Contracting Squadron, 490 First St, Suite 2160, Holloman AFB, NM 88330 not later than 1200 (12:00 p.m.) Mountain Standard Time on 19 May 2015. All quotes must be marked with RFQ number and title.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/ACC/49CONS/F2ETGT5110A101/listing.html)
- Place of Performance
- Address: 490 First St. Ste 2160, Holloman AFB, New Mexico, 88330, United States
- Zip Code: 88330
- Zip Code: 88330
- Record
- SN03734745-W 20150520/150518235222-a7769cd5905b12fcda3a5b6e6b306ebd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |