Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MAY 29, 2015 FBO #4934
SOLICITATION NOTICE

C -- Preparation of Value Engineering Study for Project # 68826 Simulations Center at Fort Hood, Texas

Notice Date

5/27/2015
 

Notice Type

Presolicitation
 

NAICS

541330 — Engineering Services
 

Contracting Office

Department of the Army, U.S. Army Corps of Engineers, USACE District, Fort Worth, Attn: CESWF-CT, PO Box 17300, Fort Worth, Texas, 76102-0300, United States
 

ZIP Code

76102-0300
 

Solicitation Number

W9126G-15-R-0103
 

Archive Date

6/25/2015
 

Point of Contact

Ali Marshall, Phone: 817-886-1068
 

E-Mail Address

Alisa.Marshall@usace.army.mil
(Alisa.Marshall@usace.army.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

C - PREPARATION OF VALUE ENGINEERING STUDY FOR PN68826 SIMULATIONS CENTER, FORT HOOD, TX General Information Document Type: Pre-Solicitation Notice Solicitation Number: W9126G-15-R-0103 Posted Date: May 27, 2015 Response Date: June 10, 2015 Classification Code: C - Architect and engineering services Title: Preparation of Value Engineering Study for Project # 68826 Simulations Center at Fort Hood, Texas. Contracting Office Address US Army Corps of Engineers, Ft. Worth District, ATTN: CESWF-CT, Room 2A17, 819 Taylor Street, Ft. Worth, TX 76102-0300 Description 1. CONTRACT INFORMATION: This announcement is open to small businesses only. This contract is being procured in accordance with Public Law (PL) 92-582 formally known as the Brooks Act as implemented in FAR Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. The North American Industrial Classification System code is 541310 and 541330, which have size standards of $7,500,000 and $15,000,000 in average annual receipts respectively. A firm-fixed-price contract will be negotiated. The contract is anticipated to be approximately awarded in June 2015. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. Register via the SAM Internet site at https://www.sam.gov/. No state level certifications will be accepted. The Contracting Officer will consider the following factors in deciding which contractor will be selected to negotiate a task order: (1) Uniquely specialized experience, (2) Performance and quality of deliverables under any current Indefinite Delivery Contracts, (3) Current capacity and ability to accomplish the order in the required time, (4) Equitable distribution of work among the contractors, (5) Past Performance Price, and, (6) Professional Qualifications. 2. PROJECT INFORMATION: Construction Range is between $45,000,000 and $55,000,000. A-E Services are required to prepare a Value Engineering Study for Project 68826 Simulations Center at Fort Hood, TX in accordance with the Society of American Value Engineers (SAVE) Value Methodology Standard, ASTM Standard Practice E1699-13 for the Value Methodology, and ER 11-1-321 Value Engineering for Army Programs. The primary objective for the Value Engineering Contractor (VEC) is to conduct a VE Study, focusing on a review of the latest design package to ensure requirements and technical parameters are clearly defined. In addition, the VEC shall evaluate available project information to enhance the value of the project through the identification of appropriate cost saving measures, including life cycle cost savings, and added value improvements without sacrificing project requirements. This project includes a standard design for a Battle Command Training Center (BCTC). The building interior follows a standard design developed by the designated US Army Corps of Engineers Center of Standardization (Huntsville District). Therefore, the focus of this VE Study will be on the site, utilities, mechanical systems, and building exterior components (walls, roof, etc). All work shall conform to the UFC, Army design criteria, ATFP criteria, and the Fort Worth District AEIM. The A-E shall furnish all labor, supervision, supplies, equipment, materials, and expenses to perform the required services. The value engineering study must be completed by 17 July 2015. The following key services will be provided by the A-E under this Contract: Pre-Event Coordination, Cost Estimate Evaluation, Attend 35% On-Board Review Meeting and Conduct VE Study, Produce Draft VE Report, Conduct After Action Review, Produce Final VE Report and Executive Summary, CMRA Reporting, and AT-OPSEC Requirements. Detailed services will be denoted in the actual A-E Statement of Work. All drawings must meet CESWF CAD, BIM, and GIS criteria. Deliverables will include: Hard Copies and/or CDs. The A-E firm shall become acquainted with all available site related information to properly estimate the difficulty and/or cost of successfully executing the work under this task order. 3. SELECTION CRITERIA: The selection criteria for this particular project are listed below in descending order of importance (first by major criterion and then by each sub criterion). Criteria a-e are primary. Criteria f-h are secondary and will only be used as "tie-breakers" among firms that are essentially technically equal a. Specialized experience and Technical Competence : Firms must demonstrate expertise in the following: (1) Conducting Value Engineering studies (2) Constructive Simulations with command, control, communications, computers and intelligence (C4I) (3) Energy Monitoring and Control Systems (EMCS) (4) Intrusion Detection System (IDS) (5) DoD Minimum Antiterrorism for Buildings. The evaluation will consider the management approach, coordination of disciplines and subcontractors, quality control procedures, and prior experience of the prime firm and any significant subcontractors on similar projects. b. Professional Qualifications: Qualified professional personnel in the following key disciplines shall be provided: Certified Value Specialist (CVS) facilitator, technical editor, cost estimator, architect, mechanical engineer, electrical engineer, and civil engineer. The key personnel must be registered/certified to practice in the appropriate professional field. The title of the roles on the resumes and the organizational chart must match the required discipline. The evaluation will consider education, certifications, training, registration, overall and relevant experience, and longevity with the firm. c. Past Performance: Past performance on DOD and other contracts with respect to cost control, quality of work, and compliance with performance schedules, as determined from ACASS and Federal Awardee Performance and Integrity Information Systems (FAPISS). The FAPIIS web site is http://www.ppirs.gov/. d. Capacity: Firms must demonstrate adequate team capacity to submit the value engineering study by 17 July 2015. The evaluation will consider the experience of the firm and any consultants in similar size projects, and the availability of an adequate number of personnel in key disciplines. e. Knowledge of Locality: Firms must demonstrate familiarity with the SWD areas, primarily Texas and New Mexico, and their applicable architecture, building codes, environmental regulations, soil conditions, seismic requirements and regulatory agencies. f. Volume of DOD Contract Awards: In Section H, Part I, SF 330, firms must show their past 12 months of DoD contract awards stated in dollars (see details in subsequent paragraph 4 (f). g. Geographic Proximity: Proximity is the physical location of a firm in relation to the location of a project. The primary geographic location of this contract is Fort Hood, TX. h. Utilization of Small Business Firms: The extent of participation of SB, SDB, historically black colleges and universities (HBCU), and minority intuitions (MI) will be measured as a percentage of the total anticipated contract effort, regardless of whether the SB, SDB, HBCU or MI is a prime contractor, subcontractor, or a joint venture partner; the greater the participation, the greater the consideration. 4.SUBMITTAL REQUIREMENTS: In an effort to reduce paperwork and cost, ALL SF 330s shall be submitted electronically via the AMRDEC SAFE website at: https://safe.amrdec.army.mil/safe/. At the AMRDEC SAFE website, select the link: For users without a CAC OR if your computer is not configured to read your CAC. Using this option will allow you to access the SAFE site as a guest. When completing the information for transmittal at the AMRDEC SAFE website, notifications should be submitted to: (use appropriate email) (a) Interested firms (single firms or joint ventures) having the capabilities to perform this work must submit a SF 330 (3/2013 Edition), for the prime firm and all consultants/subcontractors to the site stated above not later than 2:00 P.M. (Central Time) on the response date indicated above. If the response date is a Saturday, Sunday or Federal Holiday, the deadline is 2:00 P.M. the next business day. Late proposal rules found in FAR 15.208 will be followed for late submittals. Submission by telephonic facsimile or in paper will not be accepted. Personal visits to discuss this announcement will not be allowed; (b) submit a compiled SF 330, Part I from the Prime, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and sub-consultants) proposed for the contract. Do not include company literature with the SF 330; (c) Use no smaller than 10 font type using Standard English. Pages in excess of the maximums solicited will not be used in evaluation of the selection criteria. The SF 330 shall be numbered to correspond to the paragraph numbers in the synopsis. The SF 330s shall be submitted in searchable PDF format. SF330, Part I, ADDITIONAL INSTRUCTIONS: (a) In Section C, identify the discipline/service to be supplied by each consultant; (b) In Section D, include a Team Project Organization Chart to indicate how each firm on the proposed team (prime and each subcontractor is identified in Section C) integrates into the composite team; (c) In Section E, provide brief resumes of the on-staff or sub-consultant employees you intend to use to perform the work. Resumes must be submitted for each employee required to meet the minimums stated above in paragraph 3(b); (d) In Section F, a maximum of 2 projects including the prime and sub-consultants will be reviewed. Use no more than one page. (e) In Section G, Block 26, include the firm and location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with the firm location and their roles even if example project experience in Block G-26 is not applicable; (f) In Section H, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this synopsis. Include any other relevant information including a short discussion of why the firm is especially qualified based upon relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3 herein. Under paragraph 3(e) above, provide an itemized summary of DoD contract awards to include Agency, Contract Number/Task Order No., Project Title and amount. (Note: awards of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders.) Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed 2 pages for Block H. SF 330, Part II, ADDITIONAL INSTRUCTIONS (a) Responding firms must submit a copy of a current and accurate SF 330, Part II for the specific prime, other offices of the prime and subcontractor offices proposed to perform the work even if one is already on file. All Part IIs MUST be signed (signed within the past 36 months from the closing date of the synopsis) and dated either by an original handwritten signature or a cut and pasted facsimile of an original signature. Indicate in Block 5b of each Part II if the firm is a Small Business, 8(a), HUBZone, Service Disabled Veteran-Owned Small Business, or Woman-Owned Small Business. To be classified as a small business, a firm's average annual receipts or sales for the preceding three (3) fiscal years must not exceed $15,000,000. (b) In Block No. 4, Part II, provide the data Universal Numbering system (DUNS) number issued by DUN and Bradstreet Information System (1-866-705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work. (c) Solicitation packages are not provided for the A-E contracts and no additional project information will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting - Ali Marshall, Alisa.Marshall@usace.army.mil. Technical - Bart Shivers, Bart.D.Shivers@usace.army.mil. All questions must be submitted through the ProjNet System. OFFERORS QUESTIONS AND COMMENTS (a) Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. (b) To submit and review bid inquiry items, bidders will need to be current registered user or self-register into the system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your em ail address, click login. Fill in all required information and click create user. Verify that information on ext screen is correct and click to continue. (c) From this page you may view all bidder inquiries or add inquiry. Only one question will be allowed per inquiry. If multiple questions are included in a single inquiry, only the first question will be answered. All others will remain unanswered until entered in as single inquiries. (d) Bidders will receive an acknowledgement of their questions via email, followed by an answer to their question after it has been processed by our technical team. (e) The Solicitation Number is: W9126G-15-R-0103 (f) The Bidder Inquiry Key is: RQXUPF-HC2KF7 (g) The Bidder Inquiry System will be closed to new inquiries seven (7) calendar days prior to proposed submission in order to ensure adequate time is allotted to form an appropriate response an amend the solicitation, if necessary. If the System is not closed in a timely manner, an inquiry posted within seven (7) calendar days of the receipt of proposals will still be regarded as untimely and will not be afforded a substantive response. (h) Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. (i) The bidder call center Help Line operates weekdays from 8am to 5pm U.S. Central Time Zone (Chicago). The telephone number for the call Center is 1-800-428-HELP (1-800-428-4357). (j) Offerors will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your proposal has been delivered you may email: CESWF-CT-PreawardProposal@usace.army.mil THIS IS NOT A REQUEST FOR PROPOSAL
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA63/W9126G-15-R-0103/listing.html)
 

Place of Performance

Address: Fort Hood Army Installation, Killeen, Texas, 76544, United States

Zip Code: 76544
 

Record

SN03743320-W 20150529/150527235322-60f3ab2caa5cead06dee86231347df51 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |