MODIFICATION
28 -- F108 RING,SENSOR
- Notice Date
- 6/4/2015
- Notice Type
- Modification/Amendment
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DLA AVIATION AT OKLAHOMA CITY, OK; DLR PROCUREMENT OPERATIONS (AO);3001 STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-15-Q-0384
- Response Due
- 6/19/2015
- Archive Date
- 9/17/2015
- Point of Contact
- Erin Akin, Phone: 405-734-8101
- E-Mail Address
-
erin.akin@tinker.af.mil
(erin.akin@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- COMBINED SYNOPSIS/SOLICITATION FOR F108 Ring Sensor NSN: 2840-01-182-9754 PN, PN: 301-298-112-0 Critical Safety Item This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The proposed action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. Interested parties may identify their interest and capability to respond to the requirement or submit proposals. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation (DFARS). The associated NAICS code is 336412. The government anticipates award of a firm fixed price contract. The evaluation factors for this RFP are technical capability and price. The Government intends to make award to the acceptable offer with the lowest evaluated cost or price which is deemed responsible in accordance with Federal Acquisition Regulations and whose proposal conforms to the solicitation requirements. An offer will be considered non-response if technical acceptability is not met. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. One or more of the items under this acquisition is subject to Free Trade Agreements. PR Number(s): FD20301501205PLN Line Item: 0001 New Manufactured Materiels NSN: 2840011829754PN RING,SENSOR P/N: 301-298-110-0, P/N: 301-298-112-0, Description: Creates speed signal for N1. Supp. Description: 4340 Carbon Steel Quantity: 4.0000 EA Critical Safety item: Yes UID: Yes Inspection: Higher Level Delivery: 30 JUN 2016 On or Before Destn: SW3211,N/A,, -. Quantity: 4.00 Unit of Issue: EA PR Number(s): FD20301501205PLN Line Item: 0002 Government or Commercial Surplus NSN: 2840011829754PN RING,SENSOR P/N: 301-298-110-0, P/N: 301-298-112-0, Description: Creates speed signal for N1. Supp. Description: 4340 Carbon Steel Quantity: 4.0000 EA Critical Safety item: Yes UID: Yes Delivery: 30 JUN 2016 On or Before Destn: SW3211,N/A,, -. Quantity: 4.00 Unit of Issue: EA New Manufactured Material And Government Or Commercial Surplus Acceptable: New manufactured as defined as well as Government surplus or commercial surplus material as defined as (1) material, including commercial off-the shelf items manufactured for either Government or commercial use (e.g. production overrun quantities), which has never been sold to or accepted by the Government; or (2) material which would be considered "new Manufactured" except that it is not held by the actual manufacturer, the system contractor or subsidiary, successor, or distributor and as indicated below, will be considered to be acceptable in satisfaction of this requirement. The categories of surplus material and the Contract Line Item(s) to which this statement applies are: Item No(s) Category 0001 NEW MANUFACTURED MATERIAL 0002 NEW/UNUSED GOVERNMENT OR COMMERCIAL SURPLUS * See Attachment in FBO. Listing Of Surplus Material: DLAD Clause 52.211-9000, Government Surplus Material. If clause is not completed when required by the Contracting Officer, offer will be considered Technically Unacceptable. Submission of the following information for each item of surplus material included in the offeror's proposal is required to comply with the terms and conditions of FAR 11.302 (b). Information must be adequate to provide the basis for determinations required by the policy contained in FAR 11.302(b). (a) Surplus Item Identification: _______________ NSN: _______________ Noun: ____________ PN: ____________ Drawing Revision Letter: ____________ Manufacturer: ____________ (b) Federal Supply Code for Manufacturer (FSCM) marked on items per MIL-STD-130: ____________ (c) Quantity available for verification at dealer's facility: ____________ (d) Original manufacturer, government contract number: ____________ (e) Material was subsequently purchased as surplus from: ____________ (Manufacturer or Agency) (f) DLA sale number ____________ and date of sale by Government: ____________ (g) Do you have the drawings for this item? If yes, what is the revision letter/number and the date of the last revision of the drawings? ____________ (h) History of items since initially sold as surplus by Government or manufacturer: _____________________ (Storage Location, Packaging, Rework, Reconditioning, Repair, etc.) (i) Are items being offered in original unbroken containers? ____________ (j) Date of manufacture or packaging: _______________ (k) Material offered is warranted by the Contractor for a period of ____ months as contemplated by FAR 52.246-17, Warranty of Supplies of a Noncomplex Nature. (12 Months is presumed unless otherwise specified. If surplus is purchased, warranty may or may not be included in the award.) (l) The surplus items offered fit the conditional definition indicated below: (Check the appropriate definition and provide requested information. Use additional paper if more space is necessary.) (NOTE: Dates, Technical Order compliance, quality considerations, and component sources are essential information for categories (2), (3), and (4) below.) [ ] (1) New and unused: material has never been installed or used. It shows no signs of rust, corrosion, or other deterioration due to age or improper packaging/preservation. It has not been reconditioned and shows no evidence of disassembly or reassembly. [ ] (2) New and reconditioned: material has never been installed or used. It shows no signs of rust, corrosion, or other deterioration due to age or improper packaging/preservation. Reconditioning is allowed to the extent that gaskets, seals, O-rings, or other such cure-dated items have been or will be replaced prior to use in accordance with the applicable technical orders and specifications. Source of reconditioning: ____________ Summary of reconditioning: ____________ [ ] (3) New and modified: material has never been installed or used. It shows no signs of rust, corrosion, or other deterioration due to age or improper packaging/preservation. Components may have been (or may need to be) replaced in accordance with the applicable technical specifications for the purpose of configuration update or modification. Source of modification: ____________ Summary of modification: ____________ [ ] (4) Used and overhauled: material, which has been previously installed in operational equipment. It has been or can be completely overhauled, repaired, reconditioned, or modified per the applicable technical specifications to serviceable status. Source of overhaul: ____________ Overhaul technical order: ____________ QUALIFIED SOURCE: Competition is limited as only one responsible source exists and no other supplies will satisfy agency requirements. CFMI is currently the only qualified source who can manufacture this part. The Government does not have rights to Part Number 301-301-706-0 manufacturing, production or process data. This information is proprietary to CFMI. Specifications, plans, or drawings related to the procurement described are incomplete or not available and cannot be furnished by the Government. Qualification Requirements do not exist. SOLICITIATION WILL BE POSTED TO FBO ONLY. INDIVIDUAL REQUESTS WILL NOT RECEIVE A RESPONSE AS FBO IS A PUBLIC ACCESS DOMAIN. Offerors are required to be registered in the System for Award Management Registration (SAM) (www.sam.gov ). Offerors must be registered prior to receiving an award for this acquisition or for any future awards. As a condition of receipt of this contract, the Contractor agrees to implement the Department of Defense web-based software application, Wide Area Workflow Receipt and Acceptance (WAWF-RA). The website for registration is http://rmb.ogden.disa.mil. EXPORT CONTROL: DOES NOT APPLY. SOLICITATION CLAUSES: The following FAR provision and clauses apply to this acquisition and can be viewed at http://farsite.hill.af.mil: 52.203-2, 52.203-3, 52.203-6, 52.203-7, 52.203-11, 52.203-12, 52.203-13, 52.204-5, 52.204-10, 52.204-99, 52.209-2, 52.209-5, 52.209-7, 52.209-9, 52.211-17, 52.212-3, 52.212-4, 52.212-5, 52.213-1, 52.214-14, 52.215-6, 52.215-22, 52-215-23, 52.219-1, 52.219-2, 52.219-22, 52.222-1, 52.222-18, 52.222-19, 52.222-21, 52.222-22, 52.222-24, 52.222-25, 52.222-26, 52.222-29, 52.222-35, 52.222-36, 52.222-37, 52.222-38, 52.222-40, 52.222-50, 52.222-99, 52.223-3, 52.223-18, 52.225-1, 52.225-8, 52.225-13, 52.225-18, 52.225-20, 52.225-25, 52.227-3, 52.229-4, 52.230-6, 52.232-33, 52.232-34, 52.233-3, 52.233-4, 52.204-7, 52.246-2, 52.246-16, 52.247-1, 52.247-29, 52.247-50, 52.249-2, 52.249-8, 52.252-6 SOLICITATION CLAUSES: The following DFAR provision and clauses apply to this acquisition and can be found at http://farsite.hill.af.mil: 252.203-7000, 252.203-7002, 252.203-7003, 252.204-7008, 252.205-7000, 252.209-7001, 252.209-7004, 252.209-7010, 252.209-7999, 252.211-7003, 252.211-7006, 252.212-7001, 252.219-7003, 252.219-7004, 252.223-7008, 252.225-7001, 252.225-7002, 252.225-7010, 252.225-7016, 252.225-7036, 252.226-7001, 252.226-7001, 252.232-7003, 252.232-7009, 252.232-7010, 252.243-7002, 252-246-7003 SOLICITATION CLAUSES: The following DLAD provision and clauses apply to this acquisition and can be found at http://farsite.hill.af.mil: 52.211-9000 LINE ITEM 0001 - Packing, Packaging and Preservation IAW CFMI BOA SPRTA1-14-G-0002. See Attachment in FBO. LINE ITEM 0002 - Surplus Packing, Packaging and Preservation IAW CLAUSE A052.299-0004 SHIPPING CONTAINER MARKING. See Attachment in FBO. This solicitation incorporates provisions and clauses in effect through the Federal Acquisition Circular 2005-76 effective 25 August 2014 and DCN 20100927. PPIRS-SR Use of Past Performance Retrieval System Submit proposals electronically to: Erin Akin E-mail: erin.akin@tinker.af.mil Proposal is due by: 19 June 2015 @ 3:00pm CST.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-15-Q-0384/listing.html)
- Record
- SN03753884-W 20150606/150605000131-103d904252be147e086187dfe324642d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |