Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 11, 2015 FBO #4978
SOLICITATION NOTICE

73 -- Food Preparation & Serving Equipment

Notice Date

7/9/2015
 

Notice Type

Combined Synopsis/Solicitation
 

Contracting Office

FISCPS Det Everett, Everett, WA 98207
 

ZIP Code

98207
 

Solicitation Number

N00406-15-T-0611
 

Response Due

7/16/2015
 

Archive Date

1/12/2016
 

Point of Contact

Name: Kim Gripp, Title: Purchasing Agent, Phone: 4253044005, Fax: 4253044016
 

E-Mail Address

kim.gripp@navy.mil;
 

Small Business Set-Aside

Total Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N00406-15-T-0611 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-82. The associated North American Industrial Classification System (NAICS) code for this procurement is 332215 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-07-16 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be BREMERTON, WA 98314 The FLC - Puget Sound requires the following items, Meet or Exceed, to the following: LI 001: CART, TRAY AND SILVERWARE STORAGE, ALL STAINLESS STEEL CONSTRUCTION TUBULAR U-FRAME WITH LOWER PLATFORM TRAY STORAGE AND TOP FLATWARE RACK (HOLDS 10 FLATWARE CYLINDERS), 500 LB. CAPACITY, AND 5" NON-MARKING CUSHION TREAD CASTERS (2 LOCKING IF POSSIBLE)., 3, EA; LI 002: SPRAY VALVE ASSEMBLY, PRE-RINSE, 44" FLEXIBLE STAINLESS STEEL HOSE, PRE-RINSE SWIVEL, EP ACT 2005 COMPLIANT., 10, EA; LI 003: PITCHER, POLYCARBONATE, CLEAR, 60 OZ., DRIP-PROOF SPOUT, NSF, LIGHTWEIGHT, DISHWASHER SAFE, 12, EA; LI 004: HOLDER, RESERVATION STAND, MENU CARD HOLDER/NUMBER STAND, 3-5/8" DIA. X 12"H, WIRE LOOP CLIP, HEAVY WEIGHTED BASE, STAINLESS STEEL, MIRROR FINISH., 12, EA; LI 005: DISPENSER, BEVERAGE, WATER COOLER, APPROX. 12.5" DIA. X 18-3/4"H, 5-GALLON CAPACITY, SPLASH SEAL, RECESSED SPIGOT, SCREW TIGHT, SEAT TOP LID, CUP DISPENSER W/BRACKET, CARRY HANDLES, PLASTIC, ORANGE., 12, EA; LI 006: DISPENSER, BEVERAGE, BPA FREE, 10"W X 10"D X 22"H, HEXAGON, GREEN GLASS, 2-GALLON, WITH ICE CHAMBER, LID, SPIGOT, DRIP TRAY, AND DECORATIVE BLACK WIRE BASE., 6, EA; LI 007: TRAY, DRIP, STANDARD, OCTAGON, BLACK, 6", 6, EA; LI 008: DISH, CHAFING, ROLL-TOP, RECTANGULAR, 9-QUART, 18/8 STAINLESS STEEL, MIRROR FINISH, FULLY RETRACTABLE, TOP 90 DEGREE AND FULLY OPEN, WIND-GUARD, STAINLESS STEEL COVER HANDLES, STANDARD FUEL HOLDER, INCLUDES RACK, WATER PAN, 2.5" SPV FOOD PANS., 10, EA; LI 009: DISH, CHAFING, ROLL-TOP, ROUND, 6-QUART, 18/8 STAINLESS STEEL, MIRROR FINISH, FULLY RETRACTABLE, TOP 90 DEGREE AND FULLY OPEN, WIND-GUARD, STAINLESS STEEL COVER HANDLES, STANDARD FUEL HOLDER, INCLUDES RACK, WATER PAN, FOOD PANS., 10, EA; LI 010: CUP, MEASURING, ALUMINUM, 16 GA, NSF, 4-QUART, 10, EA; LI 011: CUP, MEASURING, ALUMINUM, 17 GA, NSF, 2-QUART, 10, EA; LI 012: SET, GARNISH, 6-PIECE, SET INCLUDES: VEGETABLE PEELER, DECORATING KNIFE, FRUIT DECORATOR, CHANNEL KNIFE, MELON BALLER, LEMON ZESTER, AND CANVAS ROLL. BLACK POLYPROPYLENE HANDLES., 6, SET; LI 013: KNIFE RACK, WITH SKIRT, STAINLESS STEEL, HAS POP-OUT HIGH-IMPACT AND HIGH TEMPERATURE INSERTS, HOLDS 5 FRENCH KNIVES, 1 CLEAVER, 4 SMALLER KNIVES AND 2 STEELS., 6, EA; LI 014: DISPENSER, BEVERAGE, INSULATED, BLACK, 5-GALLON, CONVEX LID, O-RING SEAL, SPRING ACTION DRIPLESS FAUCET, FORMED HANDLES, STAIN & SCRATCH RESISTANT, STACKABLE., 6, EA; LI 015: CARRIER, INSULATED FOOD, PLASTIC, BLACK, 2-COMPARTMENT, EACH COMPARTMENT WITH A FIVE 2.5" DEEP PAN CAPACITY, DUAL END LOADER, KEEPS FOOD HOT OR COLD FOR 4-6 HOURS, 4 CASTERS (AT LEAST 1 LOCKING)., 4, EA; LI 016: GLOVES, DISHWASHING, JERSEY LINED RUBBER, 17" ELBOW LENGTH, ROUGH GRIP, LIQUID-PROOF, HEAT PROTECTION UP TO 200 DEG, SEAMLESS, 20, PR; LI 017: POT HOLDER, PAN GRABBER ELASTIC STRAP, 9.5" X 11", PROTECTS TO 400 DEG, TWO THICK TERRY CLOTH LAYERS, MACHINE WASHABLE., 10, DZ; LI 018: TERRY CLOTH SLEEVE, KNITTED WRIST, 18 IN, HEAT RESISTANT UP TO 350 DEG FOR 15 SECONDS, MACHINE WASHABLE, 20, EA; LI 019: SPOON, SERVING, SOLID, SALAD BAR, BLACK, 8"L, 1/2 OZ, PLASTIC, HEAT RESISTANT UP TO 212 DEG, BREAK RESISTANT., 20, EA; LI 020: TONGS, CLEAR, POLYCARBONATE, 6 INCH, HEAT RESISTANT UP TO 212 DEG, BREAK RESISTANT., 30, EA; LI 021: BOWL, CLAM SHELL, 160 OZ, WHITE, 19"L X 12-7/8"W, STAIN AND BREAK RESISTANT, SAN, BPA FREE., 6, EA; LI 022: CUP, SEASHELL DESIGN, PLASTIC SAUCE, 2 OZ, FOOTED, SCALLOP EDGED, BREAK RESISTANT, SAN, WHITE, 10, DZ; LI 023: BOTTLE, SQUEEZE, CONE TIP, 12 OZ, SOFT POLYETHYLENE, NATURAL., 2, DZ; LI 024: PITCHER, STAINLESS STEEL, 2 LITER, NON-INSULATED, 2-3 HR TEMPERATURE RETENTION, 7MM THICK, BRUSHED SS EXTERIOR, POLISHED SS INTERIOR, 4, EA; LI 025: PERCOLATOR, ELECTRIC COFFEE MAKER, 42-CUP CAPACITY, POLISHED ALUMINUM FINISH, REMOVABLE CORD WITH 2-PRONG PLUG, 120V/60HZ/1-PH, NSF, UL, 4, EA; LI 026: TONGS, UTILITY, 6-PC MULTI-PACK, 20 GAUGE SS, 9.5" ONE-PIECE SPRINGLESS DESIGN, COLOR CODED, ANTI-MICROBIAL, ERGONOMIC HANDLES, HEAT RESISTANT TO 180 DEG, DISHWASHER SAFE., 10, SET; LI 027: SPOON REST, BRUSHED STAINLESS STEEL, 5" SQUARE, 10, EA; LI 028: CUTTING BOARD, CO-POLYMER, WHITE, 15" X 20" X 1/2" WITH FOOD SAFETY HOOK, 12, EA; LI 029: SERVING COUNTER, COLD PAN, 6 FT UNIT, 82" OAL X 42.5"W X 62.75"H, HOLDS 5 FULL SERVING SIZE FOOD PANS, ACCOMMODATES VARIOUS FOOD PANS UP TO 6", DOUBLE-WALL POLYETHYLENE, MOLDED IN HANDLES, THREADED FAUCET DRAIN, NON-ELECTRICAL, KNOCK-DOWN SNEEZE GUARDS AND TRAY RAILS, SCRATCH RESISTANT EXTERIOR, BLACK, FOUR 6" CASTERS WITH BRAKES., 2, EA; LI 030: AIRPOT, 4-LITER, VACUUM INSULATED, PUSH BUTTON, BRUSHED SS EXTERIOR, SS INTERIOR, LOCKING LID AND CARRY HANDLE, 10, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Puget Sound intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Puget Sound is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity (a) Preservation, packaging, and packing shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The unit pack quantity that applies to items under this contract is "Industry Standard". (b) Prohibited Packing Materials. The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, computer paper and similar hydroscopic or non-neutral material) is prohibited. (c) Non-Manufactured Wood Packing. All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to www.aphis.usda.gov/ppq/swp/eunmwp.html for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement. If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract. System for Award Management JUL 2013 52.212-4 Contract Terms and Conditions--Commercial Items SEP 2013 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2014) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): FAR Clauses: http://acquisition.gov/far/ DFARS Clauses: http://www.acq.osd.mil/dpap/dars/dfars/ (End of clause) Export-Controlled Items JUN 2013 Levies on Contract Payments DEC 2006 Notification of Potential Safety Issues JUN 2013 COMBATING TRAFFICKING IN PERSONS (FEB 2009) REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (AUG 2012) PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (DEC 2010) NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011) CONVICT LABOR (JUN 2003) CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (MAR 2012) PROHIBITION OF SEGREGATED FACILITIES (FEB 1999) EQUAL OPPORTUNITY (MAR 2007) AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010) ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) PAYMENT BY ELECTRONIC FUNDS TRANSFER?CENTRAL CONTRACTOR REGISTRATION (OCT 2003) Requirements Relating to Compensation of Former DoD Officials SEP 2011 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (DEC 2012) Transportation of Supplies by Sea (JUN 2013) Alternate III MAY 2002 (a) Definition. Covered DoD official is defined in the clause at 252.203-7000, Requirements Relating to Compensation of Former DoD Officials. (b) By submission of this offer, the offeror represents, to the best of its knowledge and belief, that all covered DoD officials employed by or otherwise receiving compensation from the offeror, and who are expected to undertake activities on behalf of the offeror for any resulting contract, are presently in compliance with all post-employment restrictions covered by 18 U.S.C. 207, 41 U.S.C. 2101-2107, and 5 CFR parts 2637 and 2641, including Federal Acquisition Regulation 3.104-2. (End of provision) OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (DEC 2012) ALTERNATE I (APR 2011) (a) Definitions. As used in this clause-- Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except-- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-- (1) ( ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (End of provision) (a) Definitions. ?Commercially available off-the-shelf (COTS) item,? ?component,? ?domestic end product,? ?foreign end product,? ?qualifying country,? ?qualifying country end product,? and ?United States? have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government-- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that-- (i) Each end product, except those listed in paragraph (c)(2) or (3) of this provision, is a domestic end product; and (ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror certifies that the following end products are qualifying country end products: ----------------------------------------------------------------------- (Line Item Number Country of Origin) ----------------------------------------------------------------------- (Country of Origin) (3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'': (Line Item Number)----------------------------------------------------- (Country of Origin (If known))----------------------------------------- (End of provision) 1.The offeror certifies that it is ( ), is not ( ) the actual manufacturer of the item(s) covered by this solicitation/contract. The following information is to be provided by offerors who are not the actual manufacturer: a. Actual Manufacturer(s) Identification [if more than one, identify all]: ACTUAL MFR'S PART NO.OR OTHER IDENTIFICATIONACTUAL MFR'S BUSINESS SIZE*(L, SB, SDB) NAME AND ADDRESS b. Support effort performed by the offeror in addition to purchasing the item(s) for resale to the Government: *Refer to Section K (52.219-1) for the business size standards for this solicitation. L = Large Business. SB = Small Business. SDB = Small Disadvantaged Business. (1) Testing/Quality Assurance:Yes/No (2) Preservation, Packaging, and Packing:Yes/No (3) Bar CodingYes/No (4) Other ______________________________ INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (FEB 2012) The Government contemplates award of a FFP contract resulting from this solicitation. (End of provision) (a) The procedures set forth in FAR 33.103 will be followed for submission and handling of agency protests. (b) All protests filed directly with the agency, NAVSUP Fleet Logistics Center Puget Sound (FLCPS), shall be addressed to the Contracting Officer. A protester may appeal a decision rendered by a Contracting Officer to the Reviewing Official. (c) The Reviewing Official for FLCPS is the Director, Regional Contracting Department (Code 200), NAVSUP Fleet Logistics Center Puget Sound at 467 W Street, Bremerton, WA 98314-5100. (d) Offerors should note that a review of the Contracting Officer?s decision will not extend GAO?s timeliness requirements. Therefore, any subsequent protest to GAO must be filed within 10 days of knowledge of initial adverse agency action. USE OF PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM ? STATISTICAL REPORTING (PPIRS-SR) IN PAST PERFORMANCE EVALUATION (1) The offeror?s past performance shall be evaluated in accordance with FAR 13.106-2 or 15.305(a)(2), as applicable. This procurement is subject to Past Performance Information Retrieval System ? Statistical Reporting (PPIRS-SR), authorized by the Department of Defense for use by participating activities during the acquisition of supplies and services. (2) The purpose of the PPIRS-SR is to provide contracting personnel with quantifiable past performance information regarding delivery and quality, as collected from existing DoD reporting systems. PPIRS-SR uses the past performance data collected to classify each supplier?s performance by Federal Supply Class(es) or Service Code(s). (3) Quality: The method used in PPIRS-SR to classify the quality of a supplier?s past performance is a comparison of quality records among all suppliers who have provided goods or services to the Federal Government which are categorized in the same Federal Supply Class or Service Class (FSC). Based on the comparison among suppliers in a specific FSC group, suppliers are classified by PPIRS-SR into a color rating that represents the supplier?s overall quality performance for that specific Federal Supply Class or Service Class. The following is a summarization of the PPIRS-SR classification colors: 1. Dark Blue:Top 5% of suppliers in FSC group* 2. Purple:Next 10% of suppliers in FSC group* 3. Green:Next 70% of suppliers in FSC group* 4. Yellow:Next 10% of suppliers in FSC group* 5. Red:Bottom 5% of suppliers in FSC group* * If all supplier performance ratings for an entire FSC group are equal, all suppliers in that group will be classified Green. (4) Delivery: Supplier delivery past performance is classified in PPIRS-SR by the supplier?s percentage of on time deliveries. On time deliveries are calculated using the number of line items delivered and a weighting factor which reflects the length of time a delivery was overdue. (5) PPIRS-SR classifications are established monthly for each supplier and can be reviewed at http://www.ppirs.gov/. Suppliers are granted access to PPIRS-SR for their own classifications. Offerors are encouraged to review their own classifications as well as the PPIRS-SR reporting procedures and methodology detailed in the PPIRS-SR Procedures Manual and the PPIRS-SR User Guide available at http://www.ppirs.gov. The method to challenge a rating is also found on the identified website. (6) Suppliers with no history in PPIRS-SR will be considered to have a neutral PPIRS-SR rating. Due to the interrelationship of supplies and/or services to be provided hereunder, the Government reserves the right to make a single award to the offeror whose offer is considered in the best interest of the Government, price and other factors considered. Therefore, offerors proposing less than the entire effort specified herein may be determined to be unacceptable. 1) Award under this procurement will be made to the technically acceptable quote/offer which is most advantageous to the Government, price and past performance considered. 2) Technically Acceptable - In order to be determined technically acceptable, offers must meet or exceed the specifications, delivery requirements, and other terms and conditions in the solicitation and any subsequent amendments. If applicable, offers must also meet the requirements of FAR 52.211-6 Brand Name or Equal. The offer must be determined to be technically acceptable before further consideration. 3) Price - Evaluation of price will include the following: ( )Single Award evaluation per the paragraph entitled "Single Award for All Items". ( )Split Award evaluation per the paragraph entitled ?Evaluation of Offers for Split Awards?. ( )Transportation costs per FAR 52.247-__@@___. ( )Evaluation of Options per FAR 52.217-__@@__. 4) Past Performance - Evaluation of past performance will be based on information obtained from PPIRS-SR as well as any other sources which may have relevant information. A quote/offer with a low PPIRS-SR rating (red or yellow for quality and/or less than a 70 weighted delivery score) may not represent the most advantageous quote/offer to the Government. F.O.B. Destination NOV 1991 System for Award Management Alternate A MAY 2013 Pricing Of Contract Modifications DEC 1991 System for Award Management Maintenance JUL 2013
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00406/N00406-15-T-0611/listing.html)
 

Place of Performance

Address: BREMERTON, WA 98314

Zip Code: 98314
 

Record

SN03790679-W 20150711/150709235036-ec1b91ad35c122017348c31ec72f52ab (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |