SOLICITATION NOTICE
65 -- Lens Generator - NOI Lens Generator_N634915RC1P505
- Notice Date
- 7/9/2015
- Notice Type
- Presolicitation
- NAICS
- 339115
— Ophthalmic Goods Manufacturing
- Contracting Office
- Department of the Navy, Bureau of Medicine and Surgery, Naval Medical Logistics Command, 693 Neiman Street, FT Detrick, Maryland, 21702-9203, United States
- ZIP Code
- 21702-9203
- Solicitation Number
- N634915RC1P505
- Archive Date
- 8/23/2015
- Point of Contact
- Rebecca Wisner, Phone: 301-619-8413
- E-Mail Address
-
Rebecca.C.Wisner.CIV@MAIL.MIL
(Rebecca.C.Wisner.CIV@MAIL.MIL)
- Small Business Set-Aside
- N/A
- Description
- NOI Lens Generator_N634915RC1P505 The Naval Medical Logistics Command on behalf of Naval Ophthalmic Support and Training Activity (Nostra) intends to negotiate on a sole source basis in accordance with (IAW) FAR 13.106-1(b)(1), with Intuitos LLC doing business as (DBA) Optec International 6801 38th Street N. Pinellas Park, FL 33781-6119, as the only responsible source that can provide is capable of providing an Lens Generator. The U.S. Navy has a requirement for two (2) Lens Generator. The system shall be capable of dry-cutting prescription ophthalmic lenses, free of elliptical error, in a range of -30 diopters to +30 diopters with prism correction up to 20 diopters. Items being purchased in this acquisition: Description Catalog# Optek Contour MAX Generator 120/60 850 Vacuum, Contour (in Cabinet) 120 850SA-0008 Assy, VBar Lens Check 830SA-100 The unit shall be capable of dry-cutting prescription ophthalmic lenses in a range of -30 diopters to +30 diopters with prism correction up to 20 diopters. The unit will be a free-form surface generator, thus causing no elliptical error created in the conventional surfacing method. The generator will use diamond cutter blades, with the capability to cut high index plastic, CR-39, Trivex and polycarbonate material lenses. The system will be compatible with existing Lab Management RX Software (VisionStar). A stand-alone vacuum and dust collector will be included with the generator. Power requirements are 120V, 60 Hz, single phase. Air source input requirements can be no higher than 90 psi, or about 6 bar. Vendor shall be an Original Equipment Manufacturer (OEM) authorized maintenance contractor for the proposed equipment/systems such that OEM warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. The systems shall be compliant with the Food and Drug Administration (FDA) requirements to market and deliver medical products for use in the United States of America, even should delivery be requested outside of the United States. The claims made for the product shall comply with the regulations of the FDA with respect to products for marketing and delivery of a medical product for use in the United States of America, even should delivery be requested outside of the United States. The system shall be installed in compliance with OSHA requirements. This acquisition is being conducted under simplified acquisition procedures. There are no set-aside restrictions for this requirement. The intended procurement will be classified under North American Industry Classification System 339115 with a Small Business Size Standard of 500 employees. This notice of intent is not a request for competitive proposals and no solicitation document exists for this requirement. However, parties interested in responding to this notice shall submit technical data, including cost, sufficient to determine capability in providing the same product. All capability statements received by closing of this notification of this synopsis will be considered by the Government. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based on the above information, the only technically acceptable contractor for providing a lens generator is with Intuitos LLC doing business as (DBA) Optec International 6801 38th Street N. Pinellas Park, FL 33781-6119. Capability statements shall be submitted by email only as a MS word or Adobe PDF attachment to Rebecca.C.Wisner.Civ@Mail.Mil Statements are due no later than 1:00 PM Eastern time on 23 July 2015. NO PHONE CALLS ACCEPTED.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/BUMED/N62645/N634915RC1P505/listing.html)
- Place of Performance
- Address: NOSTRA, Yorktown, Virginia, 23691-9984, United States
- Zip Code: 23691-9984
- Zip Code: 23691-9984
- Record
- SN03791864-W 20150711/150710000136-0a060ec9b3012f1b62ad8d1b312525f0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |