SOURCES SOUGHT
49 -- SOLRS AUTO LIFT - Sources Sought
- Notice Date
- 7/16/2015
- Notice Type
- Sources Sought
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Special Operations Command, 1 SOCONS- Hurlburt, 350 Tully Street, Hurlburt Field, Florida, 32544-5810, United States
- ZIP Code
- 32544-5810
- Solicitation Number
- F2F3405136A002-Rice-Hur
- Archive Date
- 8/6/2015
- Point of Contact
- Xavier L. Rice, Phone: 850-884-3264, Robert L Lieder, Phone: 8508842083
- E-Mail Address
-
xavier.rice@us.af.mil, robert.lieder.2@us.af.mil
(xavier.rice@us.af.mil, robert.lieder.2@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Sources Sought NOTICE: Sources Sought/Request for Information (RFI) SOLICITATION #: F2F3405136A002 POSTING DATE: 16 July 2015 RESPONSE DATE: NLT 13 March 2015 2:00 p.m. CDST NAICS Code: 333999 All Other Miscellaneous General Purpose Machinery Manufacturing SB Size Standard: 500 This announcement constitutes a Sources Sought Synopsis (market survey). This is not a request for quote (RFQ) or a request for proposal (RFP). This announcement is for information and planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The Government will not pay for any cost incurred in responding to this announcement. Any information submitted by respondents to this Sources Sought synopsis shall be voluntary. This Sources Sought Notice is for Market Research purposes only. The information submitted in response to the Sources Sought Notice will not be utilized to determine vendor standing in any future/potential Request for Quote/Request for Proposal, nor will it be utilized to determine if a vendor is qualified to submit a Request for Quote/Request for Proposal for any future/potential requirement. The notice and the information received shall not be used to determine how well respondents can perform a requirement, which can only be evaluated in response to a solicitation. Vendors will not receive formal notification or feedback on any information submitted in this Sources Sought request. All future/proposed submissions/solicitations requirements solicited on a Government Point of Entry will be evaluated independent of any information submitted in response to this Sources Sought Notice. No vendor will be provided information on solicitations issued on a Government Point of Entry based on this Sources Sought request. This Sources Sought Notice is relative to the NAICS code 333999. The Small Business size standard for this NAICS code is 500. Large and Small Businesses are invited to answer this market survey to determine market capabilities. Hurlburt Field, FL, is conducting market research to determine the existence of potential sources to provide Auto Shop Equipment/ Lift. MOHAWK RESOURCES LTD BRAND NAME OR EQUAL. The potential requirement will consist of the contractor providing: 1. 0001 P/N: FL-25/RJ-15 or Equal Characteristics • 25,000 Lb capacity fork truck lift with 13? tracks with standard airlock release • 2 H.P. 220V Single-Phase ? 60 HZ • Floor Requirements: 4 ?? Thick 4000 PSI • Rolling Jacking Beam ? Tracks will not slide while jacking beam is in place • Installation 2. 0002-P/N: TR-19/RJ-15 or Equal Characteristics: • With Standard Airlock Release • 19,000 Lb Capacity 4 Post Drive-On Lift ? 20? Tracks • 2 HP - 208/230 V Single-Phase ? 60 HZ • Floor Requirements: 4 ?? Thick, 4000 PSI • Rolling Jacking Beam ? Tracks will not slide while jacking beam is in place • Installation 3. 0003-P/N: TR-18 or Equal Charactersistics: • 18,000 Lb Capacity Twin Post Lifts • 4 HP / 208-230V single-phase • Concrete Floor Requirements: 4000 PSI mix, 6 depth minimum • Fork lift channel construction • Sealed roller bearings throughout the carriages • Large (stable) footprints with alignment markers for squaring • 4 anchors across the rear for the most critical support area • Weight gauge for annual test loading. Assure lift isn't being overloaded. • large swing arms bolts (all lifts have the same bolt diameter, but varying length) • 3/8 plate welded to top & bottom of swing arm tube for structural rigidity • Finished end cap of swing arm with internal weldments plate welded to top of swing arm acts as automatic arm restraint (not a geared or toothed arm restraint) • Carriages encase swing arms (not visa-versa) to keep arms straight • Adjustable width as swing arm sliders will touch in the center • Adjustable height or in-floor hydraulic lines 5, 7 1/2 and 10 truck adaptors included as standard equipment • Quality Monarch power units, (with oil drain plug on the STEEL reservoir bottom) which carry Mohawk's 5 year warranty • All position mechanical safety locks (vs. 19 as 1st position of Rotary lock) • Hydraulic safeties that are incorporated into the fluid displacement system • Direct drive lifting rods from the yoke & into the carriage eliminates any wear items • Bulk-head hydraulic fittings pre-plumbed for the fastest installation possible. • Power unit already attached to the lifts power units already full of hydraulic oil male plug already attached to the motor with female plug packed in the parts box • Ability to be installed wider for HMMWV's • Installation NOTE: Please submit electronic response indicating capability to supply the aforementioned item(s) via line card or published description (no more than 3 pages) as well as POC (name, telephone # and email address) along with contractor's CAGE, DUNS, and the physical location of your facility to the individuals listed within this notice. All work shall be performed at the contractor's facility. This request may not directly lead to a Request for Quotation/Proposal. Deadline for submission is 2:00 p.m. CST, 22 July 2015. Required Information: Any interested party who can offer all of the above may submit a written reply of not more than 3 pages, addressing each of the above items and defining how their location is capable of ALL of the minimum requirements listed above. Response deadline: 2:00 p.m. CST, 22 July 2015 Where to send responses: Xavier.Rice@us.af.mil 850-884-3264 Other information: When and if released, the solicitation will be posted to the Federal Business Opportunities web site (www.fbo.gov) or GSA E-Buy (www.gsaadvantage.gov )
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFSOC/16CS/F2F3405136A002-Rice-Hur/listing.html)
- Place of Performance
- Address: Hurlburt Field, FL, Hurlburt Field, Florida, 32544, United States
- Zip Code: 32544
- Zip Code: 32544
- Record
- SN03799366-W 20150718/150716235124-95f13703cdd2be5cc25b93ca5c38b6fc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |