MODIFICATION
66 -- Cryogen Free Cryostat
- Notice Date
- 7/16/2015
- Notice Type
- Modification/Amendment
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- SB1341-15-RQ-0608
- Archive Date
- 8/15/2015
- Point of Contact
- Joni L. Laster, Phone: 3019756205, Patrick K Staines, Phone: (301)975-6335
- E-Mail Address
-
joni.laster@nist.gov, patrick.staines@nist.gov
(joni.laster@nist.gov, patrick.staines@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment I: The purpose of this amendment is revise the minimum required specification on specification 11 and to extend the due date for quotes as follows: Specification 11 is hereby revised as follows: FROM: 11. Must include a cryogenic and vacuum compatible XYZ nanopositioning stage mounted to cryostat cold plate. The stage must have at least 3mm of travel in each direction with 10 nm scale resolution at cryogenic temperatures. The positioners must supply at least 25 g of force in each direction. All wiring inside the cryostat, electrical feedthrough connections, and air-side cabling must be provided. An electronic controller capable of controlling all three axes must be provided. The stage controller must be computer controllable. The footprint of the stage must take up less than one half of the cryostat cold plate area. TO: 11. Must include a cryogenic and vacuum compatible XYZ nanopositioning stage mounted to cryostat cold plate. In two directions (X and Y) the stage must have at least 3mm of travel in each direction with 50 nm scale resolution at cryogenic temperatures and supply at least 25 g of force. In the third direction (Z) the stage must have at least 2.5mm of travel with 50 nm scale resolution at cryogenic temperatures and supply at least 25 g of force. All wiring inside the cryostat, electrical feedthrough connections, and air-side cabling must be provided. An electronic controller capable of controlling all three axes must be provided. The stage controller must be computer controllable. The footprint of the stage must take up less than one half of the cryostat cold plate. The due date for quotes has been extended as follows: FROM: July 14, 2015 at 12 pm ET TO: July 22, 2015 at 12 pm ET All other terms and conditions and minimum required specifications remain unchanged.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-15-RQ-0608/listing.html)
- Place of Performance
- Address: 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN03799865-W 20150718/150716235610-b67c5ae75d63d06acc3fb3036f0eb769 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |