MODIFICATION
15 -- Reverse and developmental engineering work on B-2 Weapons Bay Door DAB3116B301-129
- Notice Date
- 7/16/2015
- Notice Type
- Modification/Amendment
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, PK/PZ Tinker AFB, 3001 Staff Drive, Ste 1AG76A, Tinker AFB, Oklahoma, 73145-3015, United States
- ZIP Code
- 73145-3015
- Solicitation Number
- 1560-01-444-9498
- Archive Date
- 8/1/2015
- Point of Contact
- Michelle Syth, Phone: 4057399444
- E-Mail Address
-
michelle.syth@tinker.af.mil
(michelle.syth@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential repair sources and to determine if this effort can be competitive or a Small Business Set-Aside. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The Government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited. The United States Air Force, Tinker AFB, OK is seeking sources that are capable of performing reverse and developmental engineering work on aircraft structural composite items used on the B-2 aircraft - specifically the B-2 Weapons Bay Door (Part Number: DAB3116B301-129 and NSN: 1560-01-444-9498FW). The Government will use this information to determine the best future acquisition strategy for this procurement. The Air Force will host an OASIS industry day on 30 July 2015 at the Tinker Business Park, Midwest City, Oklahoma allowing prospective vendors to discuss and post any additional questions. Location: Tinker Business and Industrial Park 2601 Liberty Parkway, Conference Room A (In the middle building, NW corner of building is conference room A) Date: July 30 Time: 8:30am-Noon Potential respondents are asked to monitor this announcement for any updates to dates/times/places for this industry day event. Please note that the material/discussions presented at this industry day event will be UNCLASSIFIED. The requirements for this effort are: •1. Development of a procurement technical data package for the above part number, •2. Successful fabrication of a prototype weapons bay door and associated tooling, •3. Development of applicable work instructions detailing the fabrication process, •4. Successful test fit on an aircraft. This development effort will follow the guidance set forth by the Defense Acquisition Guidebook, Chapter 4 (Systems Engineering) with regard to the sequence and definitions of design reviews and other development activities. The required minimum capabilities/requirements for this effort include: •1. Quality system requirements: •a. AS9100 Certification (or equivalent); •b. All special processes performed by organizations maintaining current NADCAP approvals for relevant special processes; •c. Demonstrated quality/production system that tracks perishable materials (such as those used in composite structure fabrication); •d. Demonstrated capability to generate and maintain inspection records for storage and cure temperatures (thermographs) and pressures (barographs). •2. Ability to analyze multilayer aircraft composite structures, propose material/configuration changes (to alleviate material obsolescence issues), provide substantiation data for these proposed changes, and documenting the specific process(es) needed to employ these proposed material/configuration changes. •3. Demonstrated ability to fabricate large composite components, and the associated tooling, for items up to: 400 inches long, 45 inches wide, 16 inches thick, and 500 pounds weight within a controlled clean environment. Cure temperatures up to 700 degrees F. •4. Ability to generate clear work/fabrication instructions showing the setup, layup, placement, and curing processes using a variety of pre-impregnated fabrics and tapes. •5. Ability to interpret and generate composite fabrication tooling from numerical loft data. •6. Ability to dimensionally measure lofted aircraft surfaced and verify these results against numerical loft data. •7. Laboratory facilities that can test/validate the physical properties of cured composite structures. •8. Maintains a corporate cost accounting system that meets the requirements of DCMA and/or DCAA. •9. Offeror must not be owned (directly or indirectly) by a foreign company(ies) or individual(s) for the duration of any potential Government contract. All interested firms shall submit a response that includes detailed product information (military and/or commercial) demonstrating their capabilities to produce the requested equipment to the primary point of contact listed below. Respondents are encouraged to provide as much detail as possible. The Air Force reserves the right to visit the facilities of prospective respondents to further evaluate capabilities. This workload shall be considered UNCLASSIFIED, however consideration may be made for those companies that have secured facilities that meet the requirements for SECRET programs (DoD5200.01 and DoD 5220.22). Additionally, in an effort to reduce Government travel costs associated with this effort, preference may be given to companies that are geographically closer to Tinker AFB, OK. The Air Force intends to use the OASIS contract vehicle for this requirement. Please see http://gsa.gov/oasis for further information. Firms responding should indicate whether they are a small business, a socially and economically disadvantaged business, or a woman owned business. NAICS Codes to be used for this acquisition is 541330. Any information submitted by respondents to this sources sought synopsis is strictly voluntary. As stipulated in FAR 15.201(e), responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation exists; therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government's discretion. This Sources Sought Notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not individually be notified of the results of any government assessments. The Government's evaluation of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small businesses, or any particular small business designation (e.g. SDVOSB, HUBZone, 8(a), SDB, WOSB, VOSB, etc.). Capabilities package: All interested firms shall submit a capabilities package that explicitly demonstrates company capabilities. The information in this notice is current as of the publication date but is subject to change and is not binding to the Government. Oral submissions of information are not acceptable. Submit the following information also: •- Company Name and Address •- Cage Code •- DUNs Number •- Company business size by NAIC code •- Small Business Type (s), if applicable •- Point of Contact for questions and/or clarification •- Telephone Number, fax number, and email address •- Web Page URL •- Teaming Partners (if applicable) •- OEM License/Agreement/Manual •- Copies of quality certifications •- Summary/Synopsis of previous similar work for either Government or Commercial customers Respondents are encouraged to provide any recommendations and/or concerns. Responses and/or questions to this synopsis will be posted through FBO when they are received and answers are provided. This Notice will expire on 31 July 2015. Submit information requested above via email to 424.SCMS.AFMC.RFI.Responses@tinker.af.mil. Technical questions regarding this sources sought may also be submitted to this email address. In the subject line of the e-mail please include "B-2 Weapons Bay Door" so that individual responses can be sorted and responses quickly provided. Phone calls will not be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/1560-01-444-9498/listing.html)
- Record
- SN03799976-W 20150718/150716235723-a363b788aa1198740979dd87b86a3389 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |