SOURCES SOUGHT
34 -- W911SF-15-T-0460
- Notice Date
- 7/23/2015
- Notice Type
- Sources Sought
- NAICS
- 332323
— Ornamental and Architectural Metal Work Manufacturing
- Contracting Office
- MICC - Fort Benning, Directorate of Contracting, Building 6, Meloy Hall, Room 207, Fort Benning, GA 31905-5000
- ZIP Code
- 31905-5000
- Solicitation Number
- W911SF-15-T-0460
- Response Due
- 8/3/2015
- Archive Date
- 9/21/2015
- Point of Contact
- Ray Lee Jr, 2537202868
- E-Mail Address
-
MICC - Fort Benning
(ray.lee11.mil@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS A SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY. The Mission and Installation Contracting - Fort Benning, Georgia, is conducting market research to determine availability of firms that are capable of providing repairs to a K12 swing beam and providing and installing an Automation Electric Operation of gate with remote system, add 3 Impact Attenuators and required Department of Transportation signage for the Directorate of Emergency Services on Fort Benning, Georgia. This special notice is for planning and informational purposes only and SHALL NOT be considered as an Invitation for Bid, Request for Quotation, or Request for Proposal. There is no obligation on the part of the Government to acquire any products or services described in this Sources Sought. The Government is seeking responses to this sources sought synopsis from all interested businesses capable of providing the requirement. Small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Historically Underutilized Business Zone, Service Disabled Veteran-Owned, Women-Owned Small Business, etc.) are highly encouraged to identify capabilities in meeting the requirements at fair market prices. Provide suggestions on how the requirement could be structured to facilitate competition by and among small business concerns. Describe any conditions, if any, which may limit small businesses from participation. Description of the Requirement to Include: 1. Description of requirement: Work includes This is to repair a K12 swing beam and install an Automation Electric Operation of gate with remote system, add 3 Impact Attenuators and required Department of Transportation signage on highway 27. Replace the 29' clear opening crash arm in the outbound lane of ACP 2. Purchase and install an Automation Electric Operation of gate with remote system for the K12 installed on the hwy 27 northbound exit ramp of the Eisenhower Interchange. Purchase and Install 3 QuadGuard II 55 MPH tested impact attenuator on the two hwy 27 southbound and one northbound exits of the Eisenhower Interchange. The impact attenuators on the southbound exits will be installed to cover the K12 hold close post on the left side of the exit. The impact attenuator on the northbound exit will be installed to cover the K12 swing arm and hold open post when the arm is in the open position. Purchase and install 4 exit signage with Sliding plaque to Reverse 36 quote mark by 36 quote mark letters 6 quote mark tall at all exit ramps on the Eisenhower Interchange. All supporting materials will be serviceable, new, unused, and ready for immediate use. The installation will be accomplished in accordance with standard commercial installation practices used in the industry. Materials and labor for this requirement will not be acceptable if it voids existing warranties. 2. The estimated period of performance: 1 September 2015 3. NAICS code for this requirement: 332323 Ornamental and Architectural Metal Work Manufacturing; with a size standard of 500 FSC Code: _5660____ Interested firms responding to this synopsis are to include the following information: 1. Firm's name, profile, address, DUNS number, CAGE code, point of contact, telephone number, and email address. 2. Firm's capability to perform the REQUIRED service. Be specific with RELEVANT contracts of same or similar in nature of work, size, and complexity. Include contract description, dollar value, and customer POC. 3. Firm's business size (large or small) and all applicable socio-economic category information (i.e. SDB, 8(a) HUBZ, EDWOSB, WOSB, SDVOSB, etc.). 4. Responses are limited to email correspondence only. Respondents are encouraged to review the information requested above carefully and ensure a complete response for thorough consideration. The Government WILL NOT review general capability statements, please ensure submissions are tailored to this requirement(s) of the above request. The Government will not return any information submitted in response to this synopsis. Questions shall be submitted via email to the POC below. Questions regarding this Sources Sought announcement shall be submitted NLT 0800 Eastern Standard Time (EST) on 03 August 2015. After this deadline, questions will not be considered regarding this announcement. Respondents are advised that the Government will not pay for any information or administrative cost incurred in response to this sources sought synopsis. Additional Info: Additional documentation Contracting Office Address: MICC - Fort Benning, Directorate of Contracting, Building 6, Meloy Hall, Room 207, Fort Benning, GA 31905-5000 Place of Performance: MICC - Fort Benning Directorate of Contracting, Building 6, Meloy Hall, Room 207 Fort Benning GA 31905-5000 US Point of Contact(s): SFC Ray Lee Jr. via email at ray.lee11.mil@mail.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/8dc3213127b0595347d6a136ac6a1b2d)
- Place of Performance
- Address: MICC - Fort Benning Directorate of Contracting, Building 6, Meloy Hall, Room 207 Fort Benning GA
- Zip Code: 31905-5000
- Zip Code: 31905-5000
- Record
- SN03808312-W 20150725/150723235735-8dc3213127b0595347d6a136ac6a1b2d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |