SOLICITATION NOTICE
66 -- Stainless Steel Custom Research Cans - Diagrams & Photos
- Notice Date
- 7/29/2015
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 331110
— Iron and Steel Mills and Ferroalloy Manufacturing
- Contracting Office
- Agricultural Research Service - Midwest Area
- ZIP Code
- 00000
- Solicitation Number
- AG-5615-S-15-BB05
- Archive Date
- 9/30/2015
- Point of Contact
- Dolores J Milton, Phone: 608-890-0045
- E-Mail Address
-
dolores.milton@ars.usda.gov
(dolores.milton@ars.usda.gov)
- Small Business Set-Aside
- N/A
- Description
- CCRU Custom Steel Can Diagrams This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation No. AG-5615-S-15-BB05 is being issued as a Request for Proposals (RFP) and must be valid for 60 days. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-26. The NAICS code applicable to this acquisition is 331110. For a company to qualify as a small business, the small business standard is 500 employees or less. The USDA, ARS, MWA, Cereal Crops Research Unit has a need for custom made stainless steel cans for germination, steeping, and kiln. The cans will be used to produce malts for malting quality phenotyping of breeder's samples according to their standard malting protocols and to support research on malting quality. THE SALIENT CHARACTERISTICS: Awarded vendor must be able to provide all three sizes and types of Cans. Stainless Steel Custom Cans (three sizes and types) must meet or exceed these minimum requirements: ‘GERMINATION CAN' 1) made from 0.7mm gauge stainless steel, 2) internal diameter 14.5cm, 3) height 5.1cm, 4) 2 rows of 12 evenly spaced, air exchange holes that are each 2mm in diameter, 5) holes located 1.2cm above bottom and below the top lip of cans, 6) each can requires a removable, snug-fitting lid with a 1cm lip and a similar but non-removable bottom lid attached to the can, 7) required quantity 325 cans, 9) See attached diagram - "Germination Can" which illustrates dimensions. ‘HALF STEEP CAN' 1) made from 0.7mm gauge stainless steel, 2) 4.5cm wide x 9.0cm long x 13.9cm high, 3) mesh screen located 6.4mm from bottom, 4) mesh screen consists of 1mm² holes, 5) one tab fastened to each 4.5cm wall with tab projecting 4mm inward from each wall, 6) tabs are 2.0cm long x 1.0cm wide, 7) tabs have a 2.5mm diameter hole in the projecting portion, 8) hole must be capable of accepting a 2.3mm diameter cylindrical rod, 9) tab holes are centered 7.0mm below box rim, 10) required quantity 325 cans, 11) See attached diagram - "Half Steep Can" which illustrates dimensions. ‘HALF KILN CAN' 1) made from 0.7mm gauge stainless steel, 2) 17.0cm high on semicircle, 3) 15.0cm high on linear portion, 4) Mesh screen 2.5cm off bottom of semicircle and 0.5cm off bottom of linear side, 5) Mesh screen with 2mm2 squares, 6) 11.0cm outside diameter of semi-circle, 7) 0.5cm high semicircular cylinder projecting 3.0mm outward positioned at 2.5cm off bottom on the circumference of the semicircle, 8) required quantity 325 cans, 9) See attached diagram - "Half Kiln Can" which illustrates dimensions, 10) Product (cans) and workmanship must be warranted for a period of one year. DESCRIPTIVE LITERATURE: Offerors shall submit 2 copies of the Descriptive Literature describing their proposed product in enough detail to ascertain whether the product meets the criteria listed above. DOCUMENTS TO BE INCLUDED IN PROPOSAL: In order to be considered for award Offerors shall provide 1) a Quote on company letterhead detailing the item description, unit price and total price; 2) descriptive literature, brochures, information on service and support; 3) at least 3 to 5 references (if applicable) for the proposed product. References must have received the proposed product within the last three (3) calendar years (Government references preferred but will accept commercial references). References shall be provided for the product proposed and if possible include the email address of the person to be contacted; and 4) Offerors shall include a completed copy of the provisions FAR 52.212-3, OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS, with this offer; a copy of this provision may be obtained at http://acquisition.gov/comp/far/loadmainre.html. REJECTION OF PROPOSAL: Failure to demonstrate compliance will be cause to reject the quote without further discussions. All responsible sources may submit an offer which will be considered. The following provisions and clauses apply to this acquisition and can be found in full text at http://acquisition.gov/comp/far/index.html. FAR 52.252-1, Solicitation Provisions Incorporated by Reference are as follows: FAR 52.212-1, Instructions to Offerors Commercial Items; FAR52.212-2, Evaluation - Commercial Items: FAR 52.212-3, Offeror Representations and Certifications Commercial Items (Provide with Proposal); FAR 52.214-21, Descriptive Literature (Provide with Proposal); FAR 52.204-7, System Award Management database (ALL OFFERORS MUST BE REGISTERED IN THE SYSTEM AWARD MANAGEMENT (SAM) DATABASE IN ORDER TO RECEIVE AN AWARD). The website address for registration is: https://www.sam.gov; and FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards, in accordance with FAR 4.1403, FAR 52.222-22, Previous Compliance Report, FAR 52.252-2, Clauses Incorporated by Reference are as follows: FAR 52.212-4, Contract Terms and Conditions Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items apply to this acquisition. The following FAR clauses cited in 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items are applicable to this acquisition: FAR 52.222-3, Convict Labor (E.O. 11755): FAR 52.222-19, Child Labor; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Equal Opportunity for Special Disabled Veterans; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Special Disabled Veterans; 52.225-13, Restriction on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-SYSTEM AWARD MANAGEMENT (31 U.S.C. 3332); 52.232-35, Payment by Third Party (31 U.S.C. 3332) and FAR 52.233, Protest After Award. The above FAR clauses may be viewed at http://www.acquisition.gov/comp/far/loadmainre.html. SHIPPING: FOB Destination. DELIVERY TO: USDA-ARS Cereal Crops Research Unit, Madison, WI. PROPOSAL PRICE MUST INCLUDE: any freight or shipping, as well as any applicable duties, brokerage, or customs fees. DELIVERY DUE DATE: To be determined, however, each offeror shall include their proposed delivery schedule as part of their quote. FAR 52.212-2, EVALUATION - COMMERCIAL ITEM, the significant evaluation factors, in the relative order of importance, are (i) technical capability of the item offered to meet the Government requirement including delivery date; (ii) past performance; and (iii) price (based on F.O.B. Destination), technical is more important than price. Award will be made based on overall BEST VALUE to the Government. EVALUATION & AWARD FACTORS: The contract resulting from this solicitation will be awarded to the responsible party whose offer, conforming to the solicitation, is determined most advantageous to the government, cost, and other factors considered. Each Proposal shall respond to each of the evaluation factors identified below. With the exception of past performance, a technical evaluation will be performed on each quote based solely on the information furnished and not on previous knowledge or associations. The evaluation factors are as follows: 1) Technical Factors 2) Salient characteristics and minimum requirements 3) Delivery 4) Warranty. The Offeror shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar commercial sale, provided such warranty is available at no additional cost to the Government. Acceptance of the standard commercial warranty does not waive the Government's rights under the inspection clause nor does it limit the Government's right with regard to the other terms and conditions of this contract. In the event of conflict, the terms and conditions of the contract shall take precedence over the standard commercial warranty. The contactor shall provide a copy of its standard commercial warranty (if applicable) with this response. Any amendment and documents related to this procurement will be available electronically at the Internet site: http://www.fbo.gov. Potential offerors will be responsible for downloading their own copy of those documents related to this procurement, if any. Furnish Proposals to Dolores Milton, Contracting Officer, USDA, ARS, Dairy Forage Research Center, Administration Office, 1925 Linden Drive, Madison, WI 53706-1108, no later than 4:30 p.m. August 13, 2015. Proposals and other requested documents may be provided by facsimile to (608) 890-0048 if desired. Additional information may be obtained by contacting the Contracting Officer at (608) 890-0045 or email Dolores.milton@ars.usda.gov Subject: FBO CCRU Custom Cans
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/d8ef3bace160126c08ac37a83452023b)
- Place of Performance
- Address: USDA-ARS Dairy Forage Research Center, 1925 Linden Drive, Madison, Wisconsin, 53706, United States
- Zip Code: 53706
- Zip Code: 53706
- Record
- SN03815605-W 20150731/150730000219-d8ef3bace160126c08ac37a83452023b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |