SOURCES SOUGHT
58 -- Reflective Bandpass Fileter
- Notice Date
- 8/13/2015
- Notice Type
- Sources Sought
- NAICS
- 334290
— Other Communications Equipment Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC Port Hueneme Division, 4363 Missile Way, Port Hueneme, California, 93043-4307
- ZIP Code
- 93043-4307
- Solicitation Number
- 1300475500
- Archive Date
- 9/4/2015
- Point of Contact
- Benjamin Chang, Phone: 8052280497
- E-Mail Address
-
benjamin.chang@navy.mil
(benjamin.chang@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- MARKET SURVEY - Request for Information (RFI): The Naval Surface Warfare Center (NSWC), Port Hueneme Division (PHD) is seeking information from interested parties for a Reflective Bandpass Filter. This RFI is focused on identifying capabilities in the market place and obtaining related technical information for the manufacture of an item that is Brand name or Equal to the Coleman Microwave Reflective Bandpass Filter p/n 411200. The envisioned work anticipated to be performed by a contractor as a result of a potential future solicitation is identified in this Sources Sought Notice. The Reflective Band Pass Filters eliminate interference from other new X-Band Radars and communication systems being installed in the fleet that impact the performance of the radar set AN/SPQ-9B. The RX BPF has to be 8.32 +/- 0.05 inches long, made from Wr90 waveguide with a band pass of 9.46 to 10.05 GHz, 40dB rejection at 9.25 and 10.25 GHz, an insertion loss target of 0.25 dB and a threshold of 0.5dB. The filter has to be able to handle a rotary joint failure. During a rotary joint failure, the full power of the transmitter is fed back into the receiver. After including all the losses in the system, the power handling specification for the filter was 9dW peak and 450W average. A matched pair of filters is needed, one for each channel. Fixed Tuned Bandpass Filter for X Band Waveguide Connects using M3922/54-014 wave guide flange Overall Length 8.23 +/- 0.03 inches Heatsink dimensions Waveguide Centerline to top of Heatsink: 1.787 +/- 0.030 inches End of Waveguide flange to Heatsink: 1.29 Inches Heatsink Length: 5.74 +/- 0.03 inches Heatsink width: 0.830 inches Performance Requirements Passband: 9.46 - 10.05 GHz Passband Insertion Loss: 0.25 dB, goal; 0.5 dB max Passband VSWR: 1.3:1, max Rejection: 40 dB@ 9.26 GHz and 10.25 GHz In/Out: WR90 cover flanges with thru holes Power Handling: Fundamental: 9 kW PK, 450 W ave Requested Information: The Navy requests the following information from parties interested in responding to this RFI: •a. Company Name, Address, CAGE code •b. RFI Response Point of Contact name, telephone number, and email address •c. Information describing company capabilities, resources, experience, and product lines that demonstrate an ability to perform the work described in this Sources Sought •d. Feedback and questions regarding the feasibility or challenges for performing the work described. Information herein is based on the best information available at the time of publication, is subject to revision, and is not binding upon the Government. Responses to the RFI are required to be received no later than 12:00 PM Pacific Standard Time on August 20, 2015. Responses should be provided in formats compatible with Microsoft Office 2007 for Windows or Adobe Portable Document Format (pdf). Receipt of RFI responses will be acknowledged. RFI responses will not be returned. The mailing address for RFI responses is provided at the end of this announcement. Following the date of response submission, the Government may contact respondents to seek clarification of submitted information. The Government WILL NOT PAY for any information received in response to the RFI nor will the Government compensate respondents for any cost incurred in developing information for, participating in meetings with, or engaging in discussions with the Government. Proprietary and Limited Distribution: It is incumbent upon parties providing responses to the RFI to identify all data contained within that is proprietary or has limited distribution requirements. All information marked as proprietary information will be safeguarded to prevent disclosures to non-governmental personnel and entities. At the current time, NO FUNDING IS AVAILABLE for contractual efforts. This RFI does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the Government to issue a formal solicitation or ultimately award a contract. The U.S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Additionally, any costs incurred by interested companies in response to this announcement will NOT be reimbursed and are NOT considered allowable direct charges to other contracts or tasking.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N63394/1300475500/listing.html)
- Record
- SN03836876-W 20150815/150813235006-374a97bca4c407135ee7252882df9082 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |